ASRock.com Homepage
Forum Home Forum Home > Technical Support > Intel Motherboards
  New Posts New Posts RSS Feed - Z170 Extreme7+ UEFI Update 2.10 Information
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Z170 Extreme7+ UEFI Update 2.10 Information

 Post Reply Post Reply Page  <12
Author
Message
Hatrix View Drop Down
Newbie
Newbie


Joined: 27 Feb 2018
Location: Portugal
Status: Offline
Points: 1
Post Options Post Options   Thanks (0) Thanks(0)   Quote Hatrix Quote  Post ReplyReply Direct Link To This Post Posted: 27 Feb 2018 at 10:07pm
Hi. 
Let me try and explain as best as i can. English is not my main language.
My pc setup is:
I5-2500k
ASROCK Z77 Extreme 4
16gb 1600mhz ddr3
GTX970 4GB (Running at 8x instead of 16x due to having the PCIe SSD adapter at 4x, one of the things i didn't know that was going to happen but doesn't make much difference)
SSD M.2  NVMe Samsung 960 EVO 250gb + with PCI express adapter (PCIe 3.0 x4  Host adapter m.2 NGFF PCIe SSD One Stop Serial Technology, can find the link to this adapter but the general site is onestopsystems.com)
PSU Corsair CX600 V2
Plus 3 Sata HDD hard drives 500gb, 1tb and a 2tb.

I been having an issue for a week now and I've been reading asrock forums for some time now about the booting of M.2 SSDs but only now i registered. 
And next ill explain why i replied to this topic and didn't create a new one.

So let me start.
I have updated my ASROCK Z77 Extreme 4 to version 2.90P from the asrock bios page to enable boot with my Samsung 960 and running UEFI GPT Windows10PRO. On Bios everything is on default except the Boot option "Ultra Fast" setting to enable UEFI.


Everything was running perfect for like 1 month.

For the past week i have been having some issues.
It started with the PC won't turn on, had to clear bios and set the Ultra fast setting one again.

Then after maybe 3 days of solving the issue i press the ON button on my case but the screens wont turn on.
I tried using the backup bios with the jumper and the pc didn't even turn on and MB internal red LED number wouldn't even light up.  Was completely dead. After unplugging every cable for a few minutes and after many attempts clearing bios thing it started working.

Then when i was about shutdown the pc 3 nights ago i clicked shutdown process on windows, the monitors turn black(normal) and the pc just wouldnt't shutdown. Like it was waiting the function to click in and shutdown. so i clicked 4 seconds on the case off button.

The next day had to start the process of using jumpers again because PC wouldn't start. but this time and only after a few tries it popped up a message (kind of looked like a BIOS UEFI Update that it was updating some kind of firmware.)

And the Process that parsec explains in 2. 3. 4. 5. and 6. steps happen exactly like that.
Remember i have been running this bios update completely fine for more then a 1 month.

And the computer started normally.

Yesterday i shutdown again for the night and again wont shutdown completely. This time i waited for like 15 min before i pressed 4 second case button. I don't think it's the PSU but i could be wrong.

Today i normal started the pc up and i wanted to get you this out before i kill my pc. i even started to look at new cpu, MB and Ram prices but i am not willing and money stable enough at the moment to buy a new setup. If i get this fixed i won't even touch it for 1 year or 2 more. 

So my questions are, do i try and update bios again because maybe it's damaged or corrupted?
what do you guys think this is all about?
Back to Top
 Post Reply Post Reply Page  <12
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.06
Copyright ©2001-2018 Web Wiz Ltd.

This page was generated in 0.047 seconds.