![]() |
SkyOC WINS! |
Post Reply ![]() |
Page 12> |
Author | |
t3hoz ![]() Newbie ![]() Joined: 10 Jan 2016 Status: Offline Points: 7 |
![]() ![]() ![]() ![]() ![]() Posted: 10 Jan 2016 at 5:29am |
Hello,
I've just bought an Z170 extreme4 board with an 6400 cpu and 8GB crucial ram 2400mhz. I really dont know what iam doing wrong or why it aint working. I updated the bios to the latest version 2.4. Changed the BLCK to 125 set memory profile, profile_1 wich is 2400mhz everything else stock. Save&exit > no boot I shutdown the system press it on again it boots but in some sort of safe mode so i can enter the bios and change the values. I noticed the system target memory speed is set to 3000 why? Ive tried different voltages/blck clocks but always somehow the memory speeds seems to end up higher then the value i put it on. Do i miss something? i think the system fails because of the ram speed. Anyone? Edited by Xaltar - 11 Jan 2016 at 4:00pm |
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 5994 |
![]() ![]() ![]() ![]() ![]() |
You need BIOS version 2.43 beta which can be found here if you are using a Z170 Extreme4. It is under the Beta Zone section on your product page.
|
|
![]() |
|
t3hoz ![]() Newbie ![]() Joined: 10 Jan 2016 Status: Offline Points: 7 |
![]() ![]() ![]() ![]() ![]() |
Tried even a BLCK of 103 and it didnt boot...
Memory can be overclocked as i just tried, 2600mhz is no problem at all but once the blck is touched > no boot, so it cannot be a memory problem. |
|
![]() |
|
t3hoz ![]() Newbie ![]() Joined: 10 Jan 2016 Status: Offline Points: 7 |
![]() ![]() ![]() ![]() ![]() |
OMG i feel so dumb now, thanks!! going to try it now. |
|
![]() |
|
t3hoz ![]() Newbie ![]() Joined: 10 Jan 2016 Status: Offline Points: 7 |
![]() ![]() ![]() ![]() ![]() |
It worked! 4.5Ghz with an 6400!
|
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 5994 |
![]() ![]() ![]() ![]() ![]() |
Congratz
![]() Enjoy your shiny new overclocked system ![]() And CPUz Validation link or it didn't happen
![]() Edited by Xaltar - 10 Jan 2016 at 6:26am |
|
![]() |
|
parsec ![]() Moderator Group ![]() ![]() Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
![]() ![]() ![]() ![]() ![]() |
Yes please post some pics of your OC so others know it is possible.
![]() |
|
![]() |
|
t3hoz ![]() Newbie ![]() Joined: 10 Jan 2016 Status: Offline Points: 7 |
![]() ![]() ![]() ![]() ![]() |
Sorry for the hold.. sure no problem.
Right now i have it on 4.2 (still testing) ram on 2700. I did have some bsods/freezes and didnt know if it was my ram or cpu oc. Ram right now stable from 2400 16-16-16-39 to 2700 14-14-14-36 on 1.3v 6400K ![]() http://valid.x86.fr/lh4xbr 4.2Ghz stable with 1.35v http://valid.x86.fr/u6q138 4.45Ghz but i know it aint stable on 1.35v As i dont want to put more then 1.35v i might reach 4.3/4.4 :) Many thanks or the beta bios btw ! Edited by t3hoz - 11 Jan 2016 at 8:58am |
|
![]() |
|
s_pc ![]() Newbie ![]() Joined: 11 Jan 2016 Status: Offline Points: 14 |
![]() ![]() ![]() ![]() ![]() |
I think you should change the topic to "SKYOC wins" lol
|
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 5994 |
![]() ![]() ![]() ![]() ![]() |
tehehe
Done
![]() |
|
![]() |
Post Reply ![]() |
Page 12> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |