ASRock.com Homepage
Forum Home Forum Home > Technical Support > Intel Motherboards
  New Posts New Posts RSS Feed - Asrock H110 Pro BTC+ Power
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Asrock H110 Pro BTC+ Power

 Post Reply Post Reply
Author
Message
turing View Drop Down
Newbie
Newbie


Joined: 03 Jan 2018
Location: Israel
Status: Offline
Points: 3
Post Options Post Options   Thanks (0) Thanks(0)   Quote turing Quote  Post ReplyReply Direct Link To This Post Topic: Asrock H110 Pro BTC+ Power
    Posted: 03 Jan 2018 at 4:04pm
Hi,

In the manual there is a section mentioned that if you are using more then 3 GPU, 
you should connect power also to the: 2 x 4pin molex connectors + SATA connector.
Now, I have PSU:

EVGA SuperNOVA 1600 P2, 80+ PLATINUM 1600W
(https://www.evga.com/products/product.aspx?pn=220-p2-1600-x1)

And I have 2 cables there:

(1) Four-Pin Peripheral Cable - it's 3x molex to 6 pin with just 4 connections.
6 pin HW layout (* is active pin, O is empty pin):
O**
**O

(2) SATA / Four-Pin Peripheral Cable - it's 2x molex+1x SATA to 6 pin with just 5 connections
6 pin HW layout (* is active pin, O is empty pin):
***
**O

I saw that people connecting just the 2 molex on the board from the same cable without the SATA.
So my questions are:

1. do I need to connect 2x molex + 1x SATA if I am going to use 8 GPU for instance?
2. If I need to connect just the 2x molex, can I use the cable I have in that PSU like in (1)?
3. If I need to connect both 2x molex & 1x SATA, can I use the cable I have in that PSU like in (2) - means one cable that connect to PSU for 1xSATA AND 2x molex?



THANKS!
Cheers.
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.06
Copyright ©2001-2018 Web Wiz Ltd.

This page was generated in 0.061 seconds.