ASRock.com Homepage
Forum Home Forum Home > Technical Support > AMD Motherboards
  New Posts New Posts RSS Feed - VDDSOC vs CPUSOC less 1.4v no RED warning
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

VDDSOC vs CPUSOC less 1.4v no RED warning

 Post Reply Post Reply
Author
Message
cx5 View Drop Down
Newbie
Newbie
Avatar

Joined: 15 Sep 2017
Location: HK
Status: Offline
Points: 79
Post Options Post Options   Thanks (0) Thanks(0)   Quote cx5 Quote  Post ReplyReply Direct Link To This Post Topic: VDDSOC vs CPUSOC less 1.4v no RED warning
    Posted: 10 Oct 2018 at 3:38pm
Hi guys,

Q1) Whats's the difference between CPU_SOC vs. VDD_SOC ?

Q2) uefi does not show red color font warning when set below 1.4 volts. Does this means AMD quietly recommends heavy overclocking up to 1.4v and is OK? Comments? I've tried VDD_SOC 1.3 volts for one week, then revert back. So far still surviving.

Q3) Ryzen master allows VDD_SOC from 0.8 to 1.4 volts. 

Now there's two different sources saying OK to go up to 1.4 volts. 

 from Ryzen master



below from uefi 4.81 VDD_SOC 1.39375 volts still no red warning.



Q4) why does Ryzen master not read current VDD_SOC and timings?

Q5) why uefi allows CPU_SOC go as high as 1.55 volts?



Edited by cx5 - 10 Oct 2018 at 3:46pm
taichiX370uefi4.81,1700X,HISvega64,CX750M,Optane900P,TTcoreV71,waterGPU-CPU,420x140x76radiator.
CMK32GX4M2B3000C15@2933,14151515325257251010444403272011410631661447
3200mhz1.51vSOC1.2vfunday.
Back to Top
gizmic View Drop Down
Newbie
Newbie
Avatar

Joined: 13 Jun 2018
Location: Hong Kong
Status: Offline
Points: 129
Post Options Post Options   Thanks (0) Thanks(0)   Quote gizmic Quote  Post ReplyReply Direct Link To This Post Posted: 10 Oct 2018 at 3:53pm
just means its the recommended max value. now who claims that value i'm not really sure but anything over it usually needs good cooling.

Some bios even have Extreme modes that opens up beyond that
AMD 2700X
8GBX2 G.Skill Trident Z RGB 4000@3333mhz CL14
Inno3D 1070Ti X2
X470 Taichi Ultimate
Custom Water Cooling Kit powered by Bitspower
Samsung 970 EVO M.2
Samsung 850 EVO M.2
Corsair AX860i
Back to Top
cx5 View Drop Down
Newbie
Newbie
Avatar

Joined: 15 Sep 2017
Location: HK
Status: Offline
Points: 79
Post Options Post Options   Thanks (0) Thanks(0)   Quote cx5 Quote  Post ReplyReply Direct Link To This Post Posted: 10 Oct 2018 at 4:22pm
hey gizmiz, long time no see.......

I feel like pushing my lousy CMK32GX4M2B3000C15 hynix MFR 25nm process to 3466Mhz just for once so that I can brag, hahahahahha am willing to touch the VDD_SOC 1.39375 volts just for one hour ...........

but also forcefully at the same time set CPU_SOC to 1.1 volts only just in case .........

now I don't dare yet because only have single water loop from GPU to CPU. When new 1.5 years ago, CPU temp is +5??above GPU at high load playing games in winter December, but last summer CPU +15??more more than before, I think the liquid coolant is dying need full swap replacement.

So, after coming winter, before enter summer next year I will add a radiator dedicated to CPU only, and change new coolant then try VDD_SOC 1.39375 volts .... may be can reach 3466Mhz, kakakakkakkk

I just found old screen capture record of auto vdd-soc and LL is auto also. First time I create comparison table: -
DRAM.... VDD_SOC....
2666Mhz 0.7875 volts (auto) 
2933Mhz 1.1 volts (auto), manual set to 1.025v is 100% ok too Dram keep at 1.34v
3200Mhz 1.2 volts manual, else crash. Dram must be 1.5v+++
3466Mhz 1.3 volts failed.

If from 2933 to 3200 need to increase 0.175 volts, then to go 3466Mhz at least need to add another 0.175 volts or more.... hence 1.375 volts is about the max it recommends.....

Dam, may be AMD they knew...... they just don't want to say ......... ???
taichiX370uefi4.81,1700X,HISvega64,CX750M,Optane900P,TTcoreV71,waterGPU-CPU,420x140x76radiator.
CMK32GX4M2B3000C15@2933,14151515325257251010444403272011410631661447
3200mhz1.51vSOC1.2vfunday.
Back to Top
gizmic View Drop Down
Newbie
Newbie
Avatar

Joined: 13 Jun 2018
Location: Hong Kong
Status: Offline
Points: 129
Post Options Post Options   Thanks (0) Thanks(0)   Quote gizmic Quote  Post ReplyReply Direct Link To This Post Posted: 10 Oct 2018 at 6:51pm
i wouldnt try pushing hynix kits as voltage wise since they are not built like sammy's which are voltage monsters and can take a beating (based on experience)

i already gave up on 3466 on current bios

you dont change your coolants regularly? youre suppose to flush them out once in awhile although my current fluids are 7 months old i usually flush them during CNY. 

based on RDC on my system SOC volts never goes above 1.1 all the way up to 3600 extreme but i have tested 1.2 with no success 

personally i think something wrong with 3466 straps and why the big jump from 3200 to 3466 nothing in between?
AMD 2700X
8GBX2 G.Skill Trident Z RGB 4000@3333mhz CL14
Inno3D 1070Ti X2
X470 Taichi Ultimate
Custom Water Cooling Kit powered by Bitspower
Samsung 970 EVO M.2
Samsung 850 EVO M.2
Corsair AX860i
Back to Top
kerberos_20 View Drop Down
Groupie
Groupie
Avatar

Joined: 06 Dec 2017
Location: czech republic
Status: Offline
Points: 499
Post Options Post Options   Thanks (0) Thanks(0)   Quote kerberos_20 Quote  Post ReplyReply Direct Link To This Post Posted: 11 Oct 2018 at 8:07pm
every cpu has different mem holes
mine has 3400-3600 hole, so nothing in between will work
Asrock x370 Fatal1ty Gaming X Bios 4.80,
Ryzen5 1600x @ 4.1GHz 1.375v,
G.Skill TridentZ RGB F4-3200C14D-32GTZR @ 3333MHz (14-14-14-34-48),
Arctic Liquid Freezer 240,
Palit GTX1060 3GB,
Samsung 970evo
Back to Top
cx5 View Drop Down
Newbie
Newbie
Avatar

Joined: 15 Sep 2017
Location: HK
Status: Offline
Points: 79
Post Options Post Options   Thanks (0) Thanks(0)   Quote cx5 Quote  Post ReplyReply Direct Link To This Post Posted: 13 Oct 2018 at 2:21pm
Thanks for replies guys, more things to consider now...... more like just forget it ....hahahahha, but I'm bored, going to play anyway.....

btw my lousy CMK32GX4M2B3000C15 could run VDDSOC 0.95 volts only at tight time 2933Mhz ,14,15,15,15,32,52,5,7,25,10,10,4,4,440,327,201,14,10,6,3,1,6,6,1,4,4,7 1T GDME

3200 and 3266 boths runs windows, youtube for a while then BSOD.

1st time water cooling for me, hence monitoring the efficiency to replace all new coolant, was also thinking next CNY change to white coolant add radiator etc.
taichiX370uefi4.81,1700X,HISvega64,CX750M,Optane900P,TTcoreV71,waterGPU-CPU,420x140x76radiator.
CMK32GX4M2B3000C15@2933,14151515325257251010444403272011410631661447
3200mhz1.51vSOC1.2vfunday.
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.06
Copyright ©2001-2018 Web Wiz Ltd.

This page was generated in 0.031 seconds.