VDDSOC vs CPUSOC less 1.4v no RED warning

Q1) Whats's the difference between CPU_SOC vs. VDD_SOC ?

Q2) uefi does not show red color font warning when set below 1.4 volts. Does this means AMD quietly recommends heavy overclocking up to 1.4v and is OK? Comments? I've tried VDD_SOC 1.3 volts for one week, then revert back. So far still surviving.

Q3) Ryzen master allows VDD_SOC from 0.8 to 1.4 volts. 

Now there's two different sources saying OK to go up to 1.4 volts. 

 from Ryzen master

below from uefi 4.81 VDD_SOC 1.39375 volts still no red warning.

Q4) why does Ryzen master not read current VDD_SOC and timings?

Q5) why uefi allows CPU_SOC go as high as 1.55 volts?

I feel like pushing my lousy CMK32GX4M2B3000C15 hynix MFR 25nm process to 3466Mhz just for once so that I can brag, hahahahahha am willing to touch the VDD_SOC 1.39375 volts just for one hour ...........

but also forcefully at the same time set CPU_SOC to 1.1 volts only just in case .........

now I don't dare yet because only have single water loop from GPU to CPU. When new 1.5 years ago, CPU temp is +5??above GPU at high load playing games in winter December, but last summer CPU +15??more more than before, I think the liquid coolant is dying need full swap replacement.

So, after coming winter, before enter summer next year I will add a radiator dedicated to CPU only, and change new coolant then try VDD_SOC 1.39375 volts .... may be can reach 3466Mhz, kakakakkakkk

I just found old screen capture record of auto vdd-soc and LL is auto also. First time I create comparison table: -

DRAM.... VDD_SOC....

2666Mhz 0.7875 volts (auto) 

2933Mhz 1.1 volts (auto), manual set to 1.025v is 100% ok too Dram keep at 1.34v

3200Mhz 1.2 volts manual, else crash. Dram must be 1.5v+++

3466Mhz 1.3 volts failed.

If from 2933 to 3200 need to increase 0.175 volts, then to go 3466Mhz at least need to add another 0.175 volts or more.... hence 1.375 volts is about the max it recommends.....

Dam, may be AMD they knew...... they just don't want to say ......... ???

every cpu has different mem holes

mine has 3400-3600 hole, so nothing in between will work