ASRock Forums : N3700-ITX:Wake on Lan

Author: iSgomm
Subject: 1073
Posted: 22 Oct 2015 at 9:11pm

Hi,

I need to activate the wake on LAN on N3700-ITX Motherboard.

In the section of the ACPI BIOS Configuration I have enabled the PCIE Devices Power On as stated in the manual, but if I send a message of wakeup (via router Asus RT-AC87U), the card will not turn on.

Do you have any suggestions ?

Update....

I use Debian:

Linux 3.2.0-4-amd64 #1 SMP Debian 3.2.68-1+deb7u5 x86_64 GNU/Linux

after i do the command:

ethtool -s eth1 wol g

I see parameter below:

Settings for eth1:

Supported ports: [ TP MII ]

Supported link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Half 1000baseT/Full

Supported pause frame use: No

Supports auto-negotiation: Yes

Advertised link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Full

Advertised pause frame use: Symmetric Receive-only

Advertised auto-negotiation: Yes

Link partner advertised link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Full

Link partner advertised pause frame use: Symmetric Receive-only

Link partner advertised auto-negotiation: Yes

Speed: 1000Mb/s

Duplex: Full

Port: MII

PHYAD: 0

Transceiver: internal

Auto-negotiation: on

Supports Wake-on: pumbg

Wake-on: g

Current message level: 0x00000033 (51)

drv probe ifdown ifup

Link detected: yes

NOW WAKE ON LAN IS WORKING.

Edited by iSgomm - 22 Oct 2015 at 9:39pm]]>