https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Sun, 12 Apr 2026 10:04:21 +0000 Sun, 12 Apr 2026 08:22:47 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 30 https://forum.asrock.com/RSS_post_feed.asp?TID=113490 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=113490&PID=201199&title=b760-pro-rs-wifi-white-raid-1-issue#201199 Author: MarkJohnson
Subject: 113490
Posted: 12 Apr 2026 at 8:22am

Yes, I done those exact steps. My raod1 drives are M2_1 and M2_3

]]> Sun, 12 Apr 2026 08:22:47 +0000 https://forum.asrock.com/forum_posts.asp?TID=113490&PID=201199&title=b760-pro-rs-wifi-white-raid-1-issue#201199 https://forum.asrock.com/forum_posts.asp?TID=113490&PID=201198&title=b760-pro-rs-wifi-white-raid-1-issue#201198 Author: Xaltar
Subject: 113490
Posted: 12 Apr 2026 at 6:35am

So you are getting stuck at the end of step 2 by what you describe. Try load factory
defaults, save and exit. Then repeat steps 1 and 2 and see if that clears the issue.
Make sure that Enable VMD controller, Enable VMD Global Mapping and Map this Root Port
are all set to enabled before saving and exiting.

If that fails, remove both drives from the system and attempt step 2 again and
see if it will allow you to save and exit and re-enter the UEFI again. If it works
then shut down and reinstall the drives ensuring you have them in the correct
M.2 slots, M2_1 and M2_3. See if that allows you to proceed to step 3 successfully.

Good luck. ]]> Sun, 12 Apr 2026 06:35:21 +0000 https://forum.asrock.com/forum_posts.asp?TID=113490&PID=201198&title=b760-pro-rs-wifi-white-raid-1-issue#201198 https://forum.asrock.com/forum_posts.asp?TID=113490&PID=201196&title=b760-pro-rs-wifi-white-raid-1-issue#201196 Author: MarkJohnson
Subject: 113490
Posted: 12 Apr 2026 at 4:12am

I am trying to install my 2 nvme m.2 SSD in RAID1 mode for my dad as he lost his 8-yo drive, so he wants RAID1 redundancy.

the asrock raid instructions have me stuck at step 3.

It says to save and exit raid setup, but on reboot it fails with network error and crashes (turns off).

He has, B760 pro rs wifi White (5.01), 32GB DDR5 6,000 (Crucial), i3-12100 CPU/iGPU, and Corsair 750 watt PSU (750e), and a pair WD Black 1TB SSDs for RAID1.

Let me know if you need more information.
      -=Mark=-]]> Sun, 12 Apr 2026 04:12:58 +0000 https://forum.asrock.com/forum_posts.asp?TID=113490&PID=201196&title=b760-pro-rs-wifi-white-raid-1-issue#201196