https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Fri, 21 Aug 2026 22:49:16 +0000 Fri, 21 Aug 2026 21:47:07 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 30 https://forum.asrock.com/RSS_post_feed.asp?TID=113565 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=113565&PID=201935&title=b650-pro-rs-with-8600g-oc-help-needed#201935 Author: Xaltar
Subject: 113565
Posted: 21 Aug 2026 at 9:47pm

What are you using to verify voltage in the OS? I typically use Ryzen Master for
a more accurate reading than most third party tools.

Also, why are you wanting to set a fixed frequency? In most situations you will not
see any benefit overclocking these days. For quite a while now I have gotten better
performance using boost clocks/defaults than with fixed overclocks outside of
a few very niche use cases. My Threadripper system for example boosts far higher
than I am able to achieve via fixed overclocking and that yields far better performance
in most tasks than the overclock.

As for fixed voltage, I assume you are using the fixed voltage mode in the BIOS
under the "OC tweaker" tab?

There are a large number of additional settings in your BIOS pertaining to voltage.
Check your user manual on page 35 (39 in the PDF). Try different Load Line Calibration (LLC)
settings (1-5) and see if that changes the voltage detected in OS. LLC could be
pumping extra voltage into the CPU to prevent voltage droop and keep the OC stable.

Good luck.]]> Fri, 21 Aug 2026 21:47:07 +0000 https://forum.asrock.com/forum_posts.asp?TID=113565&PID=201935&title=b650-pro-rs-with-8600g-oc-help-needed#201935 https://forum.asrock.com/forum_posts.asp?TID=113565&PID=201933&title=b650-pro-rs-with-8600g-oc-help-needed#201933 Author: Alex M
Subject: 113565
Posted: 21 Aug 2026 at 7:37pm

Good day

Owned b650 Pro RS device with Ryzen 8600g cpu. Tried to set fixed CPU frequency (5200mhz)
with fixed voltage (keep it 1.220v), but in windows sensors detecs non constant voltage about 0.8-1.5v. I m afraid something goes wrong because 1.5v is too high i think for this chip. What should i do to keep constant adjusted voltage?]]> Fri, 21 Aug 2026 19:37:53 +0000 https://forum.asrock.com/forum_posts.asp?TID=113565&PID=201933&title=b650-pro-rs-with-8600g-oc-help-needed#201933