https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Fri, 10 Apr 2026 23:18:32 +0000 Sun, 12 May 2019 22:48:00 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=11468 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=11468&PID=62929&title=z270m-pro4-secondhand-nvme-evo-960#62929 Author: Shedt
Subject: 11468
Posted: 12 May 2019 at 10:48pm

I just want to say I somewhat suspect a BIOS problem, sometimes I get corrupting in the boot menu when I press F11

I need to move the mouse around to cover the graphics error.

I?™ve reflashed my BIOS from the first oldest BIOS up, each one, until again I am on the newest.

I just don?™t know if it is my BIOS/ uefi info is messed, or the drive is second hand and needs to be wiped in a way I don?™t know about.

I will post on Samsung?™s forums]]> Sun, 12 May 2019 22:48:00 +0000 https://forum.asrock.com/forum_posts.asp?TID=11468&PID=62929&title=z270m-pro4-secondhand-nvme-evo-960#62929 https://forum.asrock.com/forum_posts.asp?TID=11468&PID=62928&title=z270m-pro4-secondhand-nvme-evo-960#62928 Author: Shedt
Subject: 11468
Posted: 12 May 2019 at 10:43pm

I?™ve done everything I can think of.

In the system browser, both slots list the drive as

Mass storage controller

I don?™t know if it should list the drive by name Samsung 960 EVO

I don?™t know if this is because the drive is second hand, is the uefi information on the drive wrong?

Secure boot?

Maybe I need to try and flash it?

Samsung flash when booted from USB does not detect drive, I will try again with CSM disable, I think I tried it before.

No matter what win10 install does not see the drive. Tried a different ISO, newest preview build.

I mean if it is bricked I should see nothing?

I?™ve reset BIOS, followed everything....

I will check my voltages.

I can only think it is dead, or I have a bent pin? I bought this board secondhand, with 3 bent pins in the area of RAM I fixed them as best as I can and I have had no problems...

I rather not take my CPU out...

CPU cooler too tight?]]> Sun, 12 May 2019 22:43:48 +0000 https://forum.asrock.com/forum_posts.asp?TID=11468&PID=62928&title=z270m-pro4-secondhand-nvme-evo-960#62928