https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Tue, 23 Jun 2026 00:32:32 +0000 Mon, 27 May 2019 06:23:23 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=11525 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=11525&PID=63299&title=h110mhdv-r3-0#63299 Author: badbri
Subject: 11525
Posted: 27 May 2019 at 6:23am

Your CPU does have built in Intel 610 HD graphics. Re-install the add-on video card and go into BIOS. On the Chipset Config page you need to change two things: under Primary Graphics Adapter set to Onboard not PCI express.
Under IGPU Multi-Monitor set to to ENABLE. Be sure to Save on Exit.
Leave the vid card in and move monitor cable to the onboard video connector as the board reboots. The machine may start boot, halt and reboot on its own after you change the BIOS. If you have video then shut down and remove addon video card and check again. ]]> Mon, 27 May 2019 06:23:23 +0000 https://forum.asrock.com/forum_posts.asp?TID=11525&PID=63299&title=h110mhdv-r3-0#63299 https://forum.asrock.com/forum_posts.asp?TID=11525&PID=63204&title=h110mhdv-r3-0#63204 Author: Jpwest
Subject: 11525
Posted: 23 May 2019 at 9:01pm

Hi RLGL....I do not know. I will check. It is a Intel G4920.]]> Thu, 23 May 2019 21:01:47 +0000 https://forum.asrock.com/forum_posts.asp?TID=11525&PID=63204&title=h110mhdv-r3-0#63204 https://forum.asrock.com/forum_posts.asp?TID=11525&PID=63203&title=h110mhdv-r3-0#63203 Author: RLGL
Subject: 11525
Posted: 23 May 2019 at 8:58pm

The cpu has to have on board video. ]]> Thu, 23 May 2019 20:58:50 +0000 https://forum.asrock.com/forum_posts.asp?TID=11525&PID=63203&title=h110mhdv-r3-0#63203 https://forum.asrock.com/forum_posts.asp?TID=11525&PID=63198&title=h110mhdv-r3-0#63198 Author: Jpwest
Subject: 11525
Posted: 23 May 2019 at 12:35pm

Hi everyone. This is my first post. I have a new H110M-HDV R3.0 and I am having a hard time to setup. The problem starts with the video. When I first installed and setup all parts, CPU, memory, HDD, keyboard, I switched on and the system beeped 5 times. I browsed for the information and found out it means, no video card installed. Well, the motherboard comes with integrated video and three port options. To be sure, I installed a video card had and it worked, then I modified the bios to use the integrated video, I tested but the problem persisted. I do not want to use a graphics card, I just want to use with the integrated video. Has anyone had the same problems? Could find any solutions? What solved the problem?

Thank you for any help.]]> Thu, 23 May 2019 12:35:44 +0000 https://forum.asrock.com/forum_posts.asp?TID=11525&PID=63198&title=h110mhdv-r3-0#63198