https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Sat, 04 Apr 2026 14:01:46 +0000 Fri, 12 Jul 2019 14:22:53 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=11848 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64590&title=x370-fatality-gaming-x-bios-5-50#64590 Author: JBG84
Subject: 11848
Posted: 12 Jul 2019 at 2:22pm

catt wrote: Hello i have same motherboard, bios 5.50 I buy R5 3600 and it dosent boot just bootlop debug codes dosent light up, with R51600 work normaly what was your process of geting to work

This is dissapointing isn't it!! ASRock just should not have published a BIOS for Ryzen Gen 3 until it was well tested and solid.

Be sure to clear CMOS on motherboard. Also be patient, I've found this motherboard will sometimes fail to successfully boot (i.e. computer on but no screen/video output). Shut off the power, I usually do so on the power supply unit switch. Turn power back on and attempt to start PC. It will often then try to sort itself out over a period of just a few minutes with the occassional auto-reboot along the way. Hopefully by the end of it you'll get a screen up.

If none of that helps. Clear CMOS again and try using just 1 memory DIMM stick.

Check all cables are connected and well seated, the usual stuff.

Hope something there helps.]]> Fri, 12 Jul 2019 14:22:53 +0000 https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64590&title=x370-fatality-gaming-x-bios-5-50#64590 https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64546&title=x370-fatality-gaming-x-bios-5-50#64546 Author: catt
Subject: 11848
Posted: 11 Jul 2019 at 5:58pm

Hello i have same motherboard, bios 5.50 I buy R5 3600 and it dosent boot just bootlop debug codes dosent light up, with R51600 work normaly
what was your process of geting to work]]> Thu, 11 Jul 2019 17:58:06 +0000 https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64546&title=x370-fatality-gaming-x-bios-5-50#64546 https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64544&title=x370-fatality-gaming-x-bios-5-50#64544 Author: JBG84
Subject: 11848
Posted: 11 Jul 2019 at 5:15pm

Also tried manually setting Infinity Fabric clock to match Memory Clock (i.e. 1600MHz/1600MHz)in advanced overclock settings, however did not resolve problem.]]> Thu, 11 Jul 2019 17:15:51 +0000 https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64544&title=x370-fatality-gaming-x-bios-5-50#64544 https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64542&title=x370-fatality-gaming-x-bios-5-50#64542 Author: JBG84
Subject: 11848
Posted: 11 Jul 2019 at 3:56pm

Kirurgs wrote: I had similar problem with x370 Fatal1ty Gaming K4. The issue was very weird, at start it didn't post at anything higher than default, as You described, but after something I did, which I do not remember exactly, it was fine. Try loading UEFI defaults or reset CMOS, boot up after that and turn off computer. Something along these lines and then try overclocking again.

Thanks for the thoughts.

As part of the process I have cleared CMOS multiple times. Unfortunately this did not resolve the issue.

Happy for you though =) ]]> Thu, 11 Jul 2019 15:56:00 +0000 https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64542&title=x370-fatality-gaming-x-bios-5-50#64542 https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64534&title=x370-fatality-gaming-x-bios-5-50#64534 Author: chubalz
Subject: 11848
Posted: 11 Jul 2019 at 1:29pm

Up for this. Need to know also b4 buying 3600]]> Thu, 11 Jul 2019 13:29:28 +0000 https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64534&title=x370-fatality-gaming-x-bios-5-50#64534 https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64531&title=x370-fatality-gaming-x-bios-5-50#64531 Author: Kirurgs
Subject: 11848
Posted: 11 Jul 2019 at 1:10pm

I had similar problem with x370 Fatal1ty Gaming K4. The issue was very weird, at start it didn't post at anything higher than default, as You described, but after something I did, which I do not remember exactly, it was fine.
Try loading UEFI defaults or reset CMOS, boot up after that and turn off computer. Something along these lines and then try overclocking again.
In my case OC profiles were saved after bios upgrade, but they totally didn't work, don't use them.

Only thing I' missing with new bios is nice and shiny Asrock + Sapphire logo (I have Sapphire videocard), now I have just white asrock.
Either Asrock remove logo or it's a bug...]]> Thu, 11 Jul 2019 13:10:39 +0000 https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64531&title=x370-fatality-gaming-x-bios-5-50#64531 https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64525&title=x370-fatality-gaming-x-bios-5-50#64525 Author: JBG84
Subject: 11848
Posted: 11 Jul 2019 at 9:52am

Hi,

Flash updated BIOS to version 5.50 to support 3rd Gen Ryzen.

Upgraded CPU to Ryzen 3600

PC will only successfully boot with RAM @ 2400MHz

All BIOS settings set to Auto.

RAM voltage set to manufacturers recommendation.

Attempting to boot PC with RAM set at any speed above 2400MHZ the PC fails to POST.

RAM is Kingston HyperX Predator RGB 16GB (2x 8GB) DDR4 4000MHz Memory
HX440C19PB3AK2/16


]]> Thu, 11 Jul 2019 09:52:49 +0000 https://forum.asrock.com/forum_posts.asp?TID=11848&PID=64525&title=x370-fatality-gaming-x-bios-5-50#64525