https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Mon, 06 Apr 2026 12:08:24 +0000 Tue, 19 Nov 2019 15:42:34 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=12925 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=12925&PID=70181&title=issue-with-z390-phantom-itx-and-intel-8600k#70181 Author: JazzKnight
Subject: 12925
Posted: 19 Nov 2019 at 3:42pm

Hello everyone,

I?™m building my first Windows PC. I wanted an itx mini board and picked this up from Amazon.

I purchased a Seasonic 650w PSU, Crucial Ballistix 3000mhz ram, Intel 7600p M.2 and Intel i5-6800k

When I first put the PC together. The MOBO had three red LEDs pulsing but would not post nor did I get anything from the integrated hdmi port. The system would also shut off after about a minute or so.

I checked the cpu cooler to make sure there was a thin layer of paste, reseated the CPU just in case and then I had two red leds pulsing on the MOBO. Still shutting down after a minute or so.

I?™m stumped and I don?™t know how to get this to post.

I took pictures of the MOBO pins, bottom of the CPU and the thermal paste I used in case that was an issue.

This cpu is compatible with all BIOs versions but I believe my version is 1.50 however I can?™t boot into the bios so I?™m unsure.

Any help would be appreciated.]]> Tue, 19 Nov 2019 15:42:34 +0000 https://forum.asrock.com/forum_posts.asp?TID=12925&PID=70181&title=issue-with-z390-phantom-itx-and-intel-8600k#70181