https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Sat, 02 May 2026 05:38:09 +0000 Sat, 18 Apr 2020 16:58:05 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=14120 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=14120&PID=74440&title=asrock#74440 Author: aaj007
Subject: 14120
Posted: 18 Apr 2020 at 4:58pm

Hi,

the mobo is defect, new CPU was killed directly so that i must buy a new mainboard too.

now it is working. Thanks]]> Sat, 18 Apr 2020 16:58:05 +0000 https://forum.asrock.com/forum_posts.asp?TID=14120&PID=74440&title=asrock#74440 https://forum.asrock.com/forum_posts.asp?TID=14120&PID=74370&title=asrock#74370 Author: Xaltar
Subject: 14120
Posted: 16 Apr 2020 at 4:54am

Disconnect power from the system, pull the CMOS battery then press the power button
for 5 - 10 seconds and leave the system like this (no power connected and battery
out) for an hour. See if the system gives you POST after that. If not RMA the CPU,
if it won't POST after a full CMOS clear it most likely has a blown IMC. ]]> Thu, 16 Apr 2020 04:54:05 +0000 https://forum.asrock.com/forum_posts.asp?TID=14120&PID=74370&title=asrock#74370 https://forum.asrock.com/forum_posts.asp?TID=14120&PID=74368&title=asrock#74368 Author: aaj007
Subject: 14120
Posted: 16 Apr 2020 at 3:00am

Hi,

i've a problem with my Asrock Z390 Phantom Gaming 6 so that there is now a debug Code with 55.

Installed is a Intel Core i9 9900k and 32GB, SSD and a RTX 2080.
As powersupply is installed a Dark Rock 850w.

Normally all was Running fine but i was testing with offset to undervolting the cpu to setup a value with -0,060v (-60mv).

Stresstest with Prime95 was running well and the power consumption was by 180W (avx) and temperatur was by 72 degree for 10 minutes, then i started the asrock tuning tool and saw the voltage for offset and has change the value about 5mv and after that the system stopped and rebooted.

Since then there stands now the debug code 55.

I removed the cpu and RAM, do a BIOS Reset but that was not helpful.

So I placed one RAM module on each port but that changed nothing. Power turned off meantime.

I took the RAM modules and installed them into another PC, this one starts fine and no debug code, windows has started.

So my question is now, how i can find out that cpu is broken or is it possible that the mobo is broken too?

Thanks a lot.
André

Edited by ASRock_TSD - 16 Apr 2020 at 2:37pm]]> Thu, 16 Apr 2020 03:00:36 +0000 https://forum.asrock.com/forum_posts.asp?TID=14120&PID=74368&title=asrock#74368