https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Sat, 25 Apr 2026 14:18:22 +0000 Wed, 29 Apr 2020 13:31:02 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=14222 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74895&title=no-more-post-after-8-months#74895 Author: cx5
Subject: 14222
Posted: 29 Apr 2020 at 1:31pm

joxxor wrote: Bootloop on Code b6, no post/bios

Recently my 3800x died, dr debug post error 33,7a,3b,b6. When to warranty and confirmed dead and replace a new.

With replaced new 3800x, when single GPU is in slot 2 and not slot 1 with a clearED cmos also same dr debug port error 33,7a,3b,b6.

Must put GPU in slot 1, boot to bios, change pcie 1x16 to 2x8, then must not clear cmos, shutdown, swap CPU to slot 2 and post OK boot windows game not crash.]]> Wed, 29 Apr 2020 13:31:02 +0000 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74895&title=no-more-post-after-8-months#74895 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74837&title=no-more-post-after-8-months#74837 Author: ThreeDee
Subject: 14222
Posted: 28 Apr 2020 at 1:51am

Yeah, should wear a grounding strap or at least grab a hold of something metal to discharge any static electricity built up in your body before touching anything on the inside or going into your case.]]> Tue, 28 Apr 2020 01:51:32 +0000 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74837&title=no-more-post-after-8-months#74837 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74836&title=no-more-post-after-8-months#74836 Author: joxxor
Subject: 14222
Posted: 28 Apr 2020 at 1:40am

I also tried to downgrad Bios to 5.8 and back to v6.2.

I think the board got some damage. Well, it's 2 and a half years old.
Maybe it got some elecrostatic burst when I mounted the nvme ssd]]> Tue, 28 Apr 2020 01:40:46 +0000 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74836&title=no-more-post-after-8-months#74836 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74835&title=no-more-post-after-8-months#74835 Author: joxxor
Subject: 14222
Posted: 28 Apr 2020 at 1:36am

datonyb wrote: with the 1600 and no hard drive and one gskill in a2 unplug from wall , and pop out the cmos coin battery , press and hold the case power button for 30 secs to properly reset the bios then boot the system as is (remember this could take 30 seconds for first boot) from your description this should boot ok, (but you also have wiped all traces of recent ram training memory etc from bios) now fit the 3600 and reboot with no ssd and the same rams stick in a2 this should also now boot enter bios then save exit

booted with 1600, no drives, one stick in A2

unplugged, removed battery, waited, pressed power button a few times.

plugged in, bootet perfectly.

unplugged, removed 1600, fitted 3600.

Bootloop on Code b6, no post/bios]]> Tue, 28 Apr 2020 01:36:32 +0000 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74835&title=no-more-post-after-8-months#74835 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74834&title=no-more-post-after-8-months#74834 Author: datonyb
Subject: 14222
Posted: 27 Apr 2020 at 11:48pm

i havnt tried a xpg 8200 in my board

but i know the 512gb version works in the asrock b450m pro4 without issue]]> Mon, 27 Apr 2020 23:48:59 +0000 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74834&title=no-more-post-after-8-months#74834 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74833&title=no-more-post-after-8-months#74833 Author: datonyb
Subject: 14222
Posted: 27 Apr 2020 at 11:45pm

yes
the object is too try and clear some bug in bios caused with the nvme drive

hence asking you too remove the cmos battery and unplug from wall

i have same board
the cmos clear button isnt so good at .............cmos clear ]]> Mon, 27 Apr 2020 23:45:30 +0000 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74833&title=no-more-post-after-8-months#74833 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74830&title=no-more-post-after-8-months#74830 Author: joxxor
Subject: 14222
Posted: 27 Apr 2020 at 11:16pm

thx so far for reading and answering.

I will try this out immediatly. But first let me try to summarize my first posting in a tl;dr version ;)



original and working setup upon installing an adata xpg sx8200 pro 1TB in m2.1

   x370 taichi, ryzen 5 3600, gskill ripjaws 5 2x16 GB DDR4-3200, CL16-18-18-38, msi 1070 ti

After installing adata xpg sx8200 ssd in m.2 Slot 1:
   Bootloop without Post/Bios on Error Code DrDebug: 33(ram in A2 and B2), b6(just one stick in any)

Same Problem with: new 3600 cpu // without m2.1 Ssd // with crucial ballstix dual ram in A2+B2.

No Problem with: 3600+single-channel Crucial stick   OR   1600x dual-channel Ripjaws





I'll keep u up2date



]]> Mon, 27 Apr 2020 23:16:13 +0000 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74830&title=no-more-post-after-8-months#74830 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74803&title=no-more-post-after-8-months#74803 Author: datonyb
Subject: 14222
Posted: 27 Apr 2020 at 9:13pm

the above may sound silly to you but humour me

i also have the x370 taichi and with the 3800x i have to go thru this procedure after bios flash or reset

if i try it with 2 sticks ofram first boot it wont do athing............]]> Mon, 27 Apr 2020 21:13:04 +0000 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74803&title=no-more-post-after-8-months#74803 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74802&title=no-more-post-after-8-months#74802 Author: datonyb
Subject: 14222
Posted: 27 Apr 2020 at 9:10pm

ok lets try to work this out

with the 1600 and no hard drive and one gskill in a2

unplug from wall , and pop out the cmos coin battery , press and hold the case power button for 30 secs to properly reset the bios

then boot the system as is (remember this could take 30 seconds for first boot)
from your description this should boot ok, (but you also have wiped all traces of recent ram training memory etc from bios)

now fit the 3600 and reboot with no ssd and the same rams stick in a2
this should also now boot
enter bios then save exit

now fit the other gskill in slot b2

im guessing you should get the boot now

so your back to where you was

now the question for you ,due to leaving out the info in first post
please tell us what new ssd you used and which m2 socket you installed it to]]> Mon, 27 Apr 2020 21:10:56 +0000 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74802&title=no-more-post-after-8-months#74802 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74795&title=no-more-post-after-8-months#74795 Author: joxxor
Subject: 14222
Posted: 27 Apr 2020 at 4:46pm

little Edit: I also tried booting without the m.2 ssd without success]]> Mon, 27 Apr 2020 16:46:07 +0000 https://forum.asrock.com/forum_posts.asp?TID=14222&PID=74795&title=no-more-post-after-8-months#74795