https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Fri, 24 Apr 2026 18:56:53 +0000 Sat, 12 Sep 2020 18:31:38 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=14407 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=14407&PID=79268&title=no-boot-no-image-2#79268 Author: cclim
Subject: 14407
Posted: 12 Sep 2020 at 6:31pm

Hi, try single ram per slot until you can boot in BIOS, THEN Set dram speed from auto to "2400".My case same exactly yours and i solved it by this method. Try it.]]> Sat, 12 Sep 2020 18:31:38 +0000 https://forum.asrock.com/forum_posts.asp?TID=14407&PID=79268&title=no-boot-no-image-2#79268 https://forum.asrock.com/forum_posts.asp?TID=14407&PID=75542&title=no-boot-no-image-2#75542 Author: PapaGus
Subject: 14407
Posted: 16 May 2020 at 8:59am

Hello all,
My son & I are building a new PC
With the MB,CPU, & RAM installed, Power on the PC.
We get lights, & fans.
But no beeps or HDMI / VGA video to any monitor we connect.
The monitor is on and only says "No Signal"

Per email from ASRock Support we ran through multiple tests.
And received a RMA to replace the MB.
We replaced the MB with the new new one they sent, but, we have the exact same issue.

I saw another post that said to try 1 stick RAM
And try remove / replace the CMOS Battery
I tried both
I re-seated the CPU, and the HDMI cable ends.
--No change.

Any other ideas??

We have the
ASRockB450M-HDV R4.0 MB
AMD RZEN 3 3200G with Radeon Vega 8 Graphics CPU
2 sticks Corsair Vengeance LPX DDR4 8GB RAM 3200MHz
and a PCI WiFi card (I left this out during tests)
]]> Sat, 16 May 2020 08:59:28 +0000 https://forum.asrock.com/forum_posts.asp?TID=14407&PID=75542&title=no-boot-no-image-2#75542