https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Sat, 25 Apr 2026 04:31:16 +0000 Sat, 27 Jun 2020 01:58:45 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=14800 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=14800&PID=76806&title=new-motherboard-issue#76806 Author: datonyb
Subject: 14800
Posted: 27 Jun 2020 at 1:58am

back to basics
take the board out of case
and lay it on the box it came with
next
plug in the cpu and heatsink
plug one stick of ram in slot a2
connect the 24 pin power plug from psu to board
plug in the 8 pin psu plug to board
this is all you need to test first boot

now without power to the psu from the wallsocket
remove the small shiney coin sized battery from the board
locate the two pins for front power switch on the board
and short them with a screwdriver a few times

this will now properly reset the cmos/bios

fit the coin battery again
plug psu into the wall
attach a monitor or tv to the board hdmi socket fit a mouse and or keyboard

now bridge/short the two pins for front panel power switch again

you should get the cpu fan to spin up and hopefully after 1-2 mins a display on the screen

]]> Sat, 27 Jun 2020 01:58:45 +0000 https://forum.asrock.com/forum_posts.asp?TID=14800&PID=76806&title=new-motherboard-issue#76806 https://forum.asrock.com/forum_posts.asp?TID=14800&PID=76804&title=new-motherboard-issue#76804 Author: erylflynn
Subject: 14800
Posted: 27 Jun 2020 at 1:05am

You could test the fans to be sure they are good but the fact you do not get a post code or tone points at bigger issues. MOBO or CPU of course.]]> Sat, 27 Jun 2020 01:05:38 +0000 https://forum.asrock.com/forum_posts.asp?TID=14800&PID=76804&title=new-motherboard-issue#76804 https://forum.asrock.com/forum_posts.asp?TID=14800&PID=76801&title=new-motherboard-issue#76801 Author: bFord
Subject: 14800
Posted: 27 Jun 2020 at 12:12am

Hi everyone, I'm new to the forum and I was hoping I could find some input as to an issue I'm having while trying to build a computer for my son. The build isn't anything fancy. Just something that he can use to play games on that'll work on lower graphics settings for now, and he can upgrade components as he gets older. Components are as listed: PSU - Cougar VTX 450, Motherboard - Asrock b450 Steel Legend BIOS Ver. P3.20, CPU - AMD Ryzen 3 3200G, RAM - 2?8G G. Skill Ripjaws 3200mhz.

That being said here is the issue: I have a known good PSU. I've jumped the ATX pins and used a multimeter to verify correct voltages throughout the ATX and CPU sockets and the fan spins accordingly. I then installed the CPU w/ cooling fan, two sticks of RAM in slots 2 and 4 (although for this issue I don't think RAM plays a factor at all), and plug in the 24 pin ATX socket, 8 pin CPU socket, and 4 pin CPU fan header. When I power everything up the motherboard's onboard RGB lighting comes on but CPU and PSU fans do not spin and nothing else happens.

At this point I'm pretty sure the motherboard I got is faulty. I've tried unplugging and plugging in the connections multiple times and the same thing happens, the CPU doesn't even get to the point where it tries to POST.

Am I missing something here with this situation or does my logic sound correct? I don't have any other known functional parts laying around to try swapping things out, so I'm kind of limited as to further testing.

Thanks to anyone who took the time to read this long-winded post. ]]> Sat, 27 Jun 2020 00:12:31 +0000 https://forum.asrock.com/forum_posts.asp?TID=14800&PID=76801&title=new-motherboard-issue#76801