https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Sat, 02 May 2026 11:03:32 +0000 Mon, 31 Aug 2020 13:44:32 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=15698 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=15698&PID=78721&title=z270m-pro4-m-2-raid-configuration#78721 Author: ASRock_TSD
Subject: 15698
Posted: 31 Aug 2020 at 1:44pm

Dear Ahoffpauir,

Thanks for the reply.

Please fill out the form from the link below to get further assistance from the technical support.
https://event.asrock.com/tsd.asp

With thanks,
ASRock TSD]]> Mon, 31 Aug 2020 13:44:32 +0000 https://forum.asrock.com/forum_posts.asp?TID=15698&PID=78721&title=z270m-pro4-m-2-raid-configuration#78721 https://forum.asrock.com/forum_posts.asp?TID=15698&PID=78719&title=z270m-pro4-m-2-raid-configuration#78719 Author: AHoffpauir
Subject: 15698
Posted: 31 Aug 2020 at 11:59am

As I noted, the bios is updated, I have tried rebuilding the RAID several times using different settings to no avail. Please post the exact steps to building a M.2 raid for use with Widows 10.]]> Mon, 31 Aug 2020 11:59:23 +0000 https://forum.asrock.com/forum_posts.asp?TID=15698&PID=78719&title=z270m-pro4-m-2-raid-configuration#78719 https://forum.asrock.com/forum_posts.asp?TID=15698&PID=78718&title=z270m-pro4-m-2-raid-configuration#78718 Author: ASRock_TSD
Subject: 15698
Posted: 31 Aug 2020 at 11:55am

Dear AHoffpauir,

Thank you for posting your query to the ASRock forum.

We have checked, using M.2 x2 building RAID1/0 the Win10 can be installed properly.

Please make sure that you have the BIOS 2.50 updated.
If possible, please try with a different Win10 installation method and try to re-build the RAID to see if it will work.

With thanks,
ASRock TSD

Edited by ASRock_TSD - 31 Aug 2020 at 1:41pm]]> Mon, 31 Aug 2020 11:55:29 +0000 https://forum.asrock.com/forum_posts.asp?TID=15698&PID=78718&title=z270m-pro4-m-2-raid-configuration#78718 https://forum.asrock.com/forum_posts.asp?TID=15698&PID=78706&title=z270m-pro4-m-2-raid-configuration#78706 Author: AHoffpauir
Subject: 15698
Posted: 30 Aug 2020 at 12:25am

]]> Sun, 30 Aug 2020 00:25:47 +0000 https://forum.asrock.com/forum_posts.asp?TID=15698&PID=78706&title=z270m-pro4-m-2-raid-configuration#78706 https://forum.asrock.com/forum_posts.asp?TID=15698&PID=78705&title=z270m-pro4-m-2-raid-configuration#78705 Author: AHoffpauir
Subject: 15698
Posted: 30 Aug 2020 at 12:17am

I tried setting up the raid using 2 M.2 NVME drives, I ran through the following steps:

1.     Press F2 or Del during POST to get into BIOS.
2.     Press F6 to Advanced mode.
3.     Select Advanced, Storage Configuration, and set SATA Mode selection from [AHCI] to [Intel RST Premium With Intel Optane System Acceleration (RAID Mode)].
4.     Set Launch Storage OpROM Policy from [Legacy only] to [UEFI only].
5.     Set M2_1 ??RST Pcie Storage Remapping from [Disabled] to [Enabled].
6.     Set M2_2 ??RST Pcie Storage Remapping from [Disabled] to [Enabled].
7.     Press F10 to save configuration change and get into BIOS again.
8.     Select Advanced, Intel(R) Rapid Storage Technology, Create RAID Volume.
9.     Key-in a volume name and press <Enter>, or simply press <Enter> to accept the default name
10.     Select your desired RAID Level and press <Enter>
11.     Select the hard drives to be included in the RAID array and press <Enter>
12.     Select a stripe size for the RAID array and press <Enter>
13.     Select Create Volume and press <Enter> to start creating the RAID array

Everything looks great until I get to windows 10 install which shows the error "Windows can't be installed on this drive" see attached image.
]]> Sun, 30 Aug 2020 00:17:53 +0000 https://forum.asrock.com/forum_posts.asp?TID=15698&PID=78705&title=z270m-pro4-m-2-raid-configuration#78705