https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Wed, 22 Apr 2026 03:12:32 +0000 Thu, 31 Dec 2020 23:13:51 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=17596 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=17596&PID=82688&title=b450m-pro4-ryzen-3200g-no-post#82688 Author: isuga
Subject: 17596
Posted: 31 Dec 2020 at 11:13pm

Figured it out. Stupid newbie error. Didn't have one of my connectors seated correctly. It was a little tight so I didn't want to force it but when I wiggled it it clicked.]]> Thu, 31 Dec 2020 23:13:51 +0000 https://forum.asrock.com/forum_posts.asp?TID=17596&PID=82688&title=b450m-pro4-ryzen-3200g-no-post#82688 https://forum.asrock.com/forum_posts.asp?TID=17596&PID=82541&title=b450m-pro4-ryzen-3200g-no-post#82541 Author: indresh88
Subject: 17596
Posted: 28 Dec 2020 at 11:29pm

disable c states controls and core performance boost in asrock bios in advanced> amd cms
]]> Mon, 28 Dec 2020 23:29:20 +0000 https://forum.asrock.com/forum_posts.asp?TID=17596&PID=82541&title=b450m-pro4-ryzen-3200g-no-post#82541 https://forum.asrock.com/forum_posts.asp?TID=17596&PID=82501&title=b450m-pro4-ryzen-3200g-no-post#82501 Author: isuga
Subject: 17596
Posted: 26 Dec 2020 at 10:24pm

Thank you for your suggestions.

I have tried removing the CMOS and replacing. I left it on for several minutes w/o any luck. Totally blank screen and the monitor LED is orange indicating that it is connected but receiving no data.

Additionally, I was able to test the memory in another older intel computer. I didn't think they would be compatible but they worked just fine.

So I guess I'm left w/ either a CPU problem or a motherboard problem?



]]> Sat, 26 Dec 2020 22:24:49 +0000 https://forum.asrock.com/forum_posts.asp?TID=17596&PID=82501&title=b450m-pro4-ryzen-3200g-no-post#82501 https://forum.asrock.com/forum_posts.asp?TID=17596&PID=82495&title=b450m-pro4-ryzen-3200g-no-post#82495 Author: Reset
Subject: 17596
Posted: 26 Dec 2020 at 5:37pm

You should connect the monitor to the connector on the mainboard, because the 3200G has its own graphics chip and drives it first.

Next you should remove the CMOS battery briefly.

The first boot of a Ryzen can take a little longer. So give it a few minutes. ]]> Sat, 26 Dec 2020 17:37:07 +0000 https://forum.asrock.com/forum_posts.asp?TID=17596&PID=82495&title=b450m-pro4-ryzen-3200g-no-post#82495 https://forum.asrock.com/forum_posts.asp?TID=17596&PID=82491&title=b450m-pro4-ryzen-3200g-no-post#82491 Author: isuga
Subject: 17596
Posted: 26 Dec 2020 at 1:35pm

Trying to put together a budget build for my kid. I only do a new build every few years or so and I'm new to AMD Ryzen processors so please be patient with me. I got this parts list online so I think it is all compatible but not sure.

ASRock B450M Pro4
Ryzen 3 3200G
Patriot Viper DDR4 PC4-25600 3200MHz (PVR416G320C6K)
Thermaltake Smart 500W PSU
ADATA SU635 240GB SATA SSD
XFX Radeon RX 570

I can't get it to post. CPU fan and case fan turns on. As far as I can tell, there are no indicator LEDs on the motherboard itself. If there are, they are all off. I get no signal to the monitor.

I have tried the following:

1) My monitor only has VGA and DVI. (Planning to get new monitor later)
I have tried:
    MB (w/o GPU plugged in) HDMI w/ adapter to monitor DVI,
    MB DVI to monitor DVI,
    GPU HDMI w/ adapter to monitor DVI,
    GPU DVI to monitor DVI.
Yes, I checked to make sure GPU was also connected to the PSU. Fan and LED on GPU turns on.
Yes, I plugged monitor into my laptop HDMI port using the same cable and the monitor works.

2) Check BIOS version. BIOS version sticker on MB says its P4.30. According to the CPU support page, the 3200G is suppose to be ok w/ P3.30 and above.

3) Checked memory compatibility. I am not completely sure if this is compatible. The 3200G core identifier is "Picasso". I can not find a memory compatibility list for "Picasso" for this board. But the memory I am using is listed for at least a couple of the others.

4) Checked memory. I don't have a way to directly check to make sure that both sets of memory are good. They are brand new and I can't imagine both being bad. However, I started w/ both in A2 and B2. Then tried each in A2 only. Then tried each in all the other slots (single).

5) Finally I pulled the CPU to make sure I didn't bend any pins even though it dropped into the socket w/o any resistance and then re-installed CPU and fan.

Any help would be much appreciated.
]]> Sat, 26 Dec 2020 13:35:05 +0000 https://forum.asrock.com/forum_posts.asp?TID=17596&PID=82491&title=b450m-pro4-ryzen-3200g-no-post#82491