ASRock Forums : Error code 60 https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Sat, 07 Mar 2026 16:36:15 +0000 Fri, 26 Feb 2016 04:00:28 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=2031 <![CDATA[ASRock Forums]]> https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ <![CDATA[Error code 60 : Yes update to new bios helped...]]> https://forum.asrock.com/forum_posts.asp?TID=2031&PID=10720&title=error-code-60#10720 Author: landychev
Subject: 2031
Posted: 26 Feb 2016 at 4:00am

Yes update to new bios helped solve it.

Now i can use 64gb ram.

But now i have usb 3.0 problem.

When copy large files, +20gb i get BSOD i do not have that problem when using usb 2.0 port.

I run Windows 10 64bit with latest windows update.

]]> Fri, 26 Feb 2016 04:00:28 +0000 https://forum.asrock.com/forum_posts.asp?TID=2031&PID=10720&title=error-code-60#10720 <![CDATA[Error code 60 : Capacity is one of the more major...]]> https://forum.asrock.com/forum_posts.asp?TID=2031&PID=10514&title=error-code-60#10514 Author: Xaltar
Subject: 2031
Posted: 18 Feb 2016 at 5:56pm

Capacity is one of the more major differences when it comes to RAM support. Just because an 8gb model is listed is no indication a 16gb model will work. Often the larger capacity model will be double sided vs single sided of the smaller listed capacity or alternatively use completely different, larger capacity RAM chips.

You will need to get your hands on a supported RAM module, use it to post and then update to the latest BIOS and try your existing RAM with that.

]]> Thu, 18 Feb 2016 17:56:30 +0000 https://forum.asrock.com/forum_posts.asp?TID=2031&PID=10514&title=error-code-60#10514 <![CDATA[Error code 60 : Hi i have 2 of this kit = 2x2x16gb,...]]> https://forum.asrock.com/forum_posts.asp?TID=2031&PID=10513&title=error-code-60#10513 Author: landychev
Subject: 2031
Posted: 18 Feb 2016 at 5:13pm

Hi i have 2 of this kit = 2x2x16gb, total 64GB . I have tried in all socket put still i can't get into bios. Computer boot up and nothing happens.

As i can se in the list.8Gb chip i supported off this models so why should 16gb not work ?

Should not the system under clock the memory to its max speed by default ?

]]> Thu, 18 Feb 2016 17:13:04 +0000 https://forum.asrock.com/forum_posts.asp?TID=2031&PID=10513&title=error-code-60#10513 <![CDATA[Error code 60 : landychev wrote:hi i bought...]]> https://forum.asrock.com/forum_posts.asp?TID=2031&PID=10506&title=error-code-60#10506 Author: parsec
Subject: 2031
Posted: 18 Feb 2016 at 3:08pm

landychev wrote:

hi i bought one asrock extreme4 x99m motherboard and intel I7-5820K cpu.

And i have 1200psu so there is power.

The memory i have is

Corsair Vengeance LPX Black 32GB (4x16GB) / 2666MHz / DDR4 / CL16 / CMK32GX4M2A2666C16

I get code 60 when i boot the computer. I have tried to change the stick in different slots but nothing seems to help.

Will this memory not work in my configuration ? Cant i use 16gb stick ?

Best regard Alex

You have a 32GB kit of Corsair memory as the model number, but you wrote 4x16GB, which is 64GB.

So are you using two individual CMK32GX4M2A2666C16 kits, four DIMMs total, or just one kit of two DIMMs?

I see only one model of 16GB DIMMs in your board's Memory Support list. While that list is not definitive, the lack of 16GB DIMMs may mean something.

Corsair's compatibility list of their memory for ASRock X99 boards might not contain the model number you have, I'll let you determine if the model number you wrote is correct and if it is in this list:

http://www.corsair.com/~/media/Corsair/download-files/manuals/dram/DDR4-Compatibility.pdf

Have you tried using only two DIMMs in the two slots farthest from the CPU, A1 and C1? If not, try that first and clear the UEFI/CMOS before you start the PC after inserting the two DIMMs.

If you can pass POST and get into the UEFI, leave the memory at its default speed, which is likely 2133. Do NOT select the XMP profile yet.

In the UEFI, DRAM Configuration screen, look for an option called MRC Fast Boot. It is normally Enabled by default. Set it to Disabled. This allows "memory training" to occur, which helps with memory compatibility.

If you can't POST with two DIMMs, try only one in slot A1. Again try to get into the UEFI and set MRC Fast Boot to Disabled.

You can also try increasing the memory voltage beyond 1.200V. Just as important is increasing the VCCSA voltage and VCCIO voltage. Both of those will normally be increased when using the XMP profile, but you may need it for high capacity DIMMs like yours at stock speeds.

Intel only guarantees a maximum memory speed of 2133 for your CPU. Anything above that is considered an OC. Your CPU may not be capable of running at 2666 with 64GB, or even 32GB.
]]> Thu, 18 Feb 2016 15:08:03 +0000 https://forum.asrock.com/forum_posts.asp?TID=2031&PID=10506&title=error-code-60#10506 <![CDATA[Error code 60 : hi i bought one asrock extreme4...]]> https://forum.asrock.com/forum_posts.asp?TID=2031&PID=10500&title=error-code-60#10500 Author: landychev
Subject: 2031
Posted: 18 Feb 2016 at 7:35am

hi i bought one asrock extreme4 x99m motherboard and intel I7-5820K cpu.