https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Tue, 19 May 2026 09:19:39 +0000 Wed, 13 Dec 2023 02:46:41 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=21091 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=21091&PID=108577&title=asrock-h510-pro-btc-error#108577 Author: ozilker0740
Subject: 21091
Posted: 13 Dec 2023 at 2:46am

H510 Pro BTC+ anakartımı   gerekli kartları takıp tek pusu ile çalı?tırmak için açmaya çalı?tım, hiç tepki vermedi,tek kart dened?m y?ne açılmadı, kartsız da açılmıyor bıos ekranı da gelmiyor, ne yapılabilir,heryer? temiz, ba?lantıları da kesinlikle do?ruuduri neden tepkii vermiyor,
birkçaç farklı rram denedim, i?lemci de daha önceki kullandı?ım i?lemci, anakarta uyumlu, anakart psu ya açılma teti?i vermiyor, ]]> Wed, 13 Dec 2023 02:46:41 +0000 https://forum.asrock.com/forum_posts.asp?TID=21091&PID=108577&title=asrock-h510-pro-btc-error#108577 https://forum.asrock.com/forum_posts.asp?TID=21091&PID=102451&title=asrock-h510-pro-btc-error#102451 Author: ozilker07
Subject: 21091
Posted: 18 Dec 2022 at 12:27pm

I have an amazon invoice, BUT IN MY COUNTRY, THERE IS NO AUTHORIZED SERVICE WHY NO DEVELOPMENT ON THIS ISSUE WHAT CAN BE DONE

1. CARD PCIe slot sees the card, next pcie slots do not see the card, bios 1.40 . Should I switch to 1.50, will this be fixed?]]> Sun, 18 Dec 2022 12:27:04 +0000 https://forum.asrock.com/forum_posts.asp?TID=21091&PID=102451&title=asrock-h510-pro-btc-error#102451 https://forum.asrock.com/forum_posts.asp?TID=21091&PID=102450&title=asrock-h510-pro-btc-error#102450 Author: ozilker07
Subject: 21091
Posted: 18 Dec 2022 at 12:08pm

If 1 slot card is installed, the motherboard does not react, if a card is inserted into the video card slots, it does not react, and it does not display, does not connect, it did not give similar symptoms in a few months of use, these days it opens sometimes and sometimes it does not turn on, with zero ambush. It didn't matter if I used it, can this be fixed with software, the psu does not react to opening, it does regular action when it is opened, it insists that I open it when I close it.
If I switch to bios 1.40, 1.50 bios, do they need fixes or maintenance,
thanks
respects]]> Sun, 18 Dec 2022 12:08:27 +0000 https://forum.asrock.com/forum_posts.asp?TID=21091&PID=102450&title=asrock-h510-pro-btc-error#102450 https://forum.asrock.com/forum_posts.asp?TID=21091&PID=97625&title=asrock-h510-pro-btc-error#97625 Author: threadzipper1957
Subject: 21091
Posted: 28 Mar 2022 at 9:02pm

Dear Liandri,

There are a few things to check
Is your CPU, in the CPU support list?
http://www.asrock.com/mb/Intel/H510%20Pro%20BTC+/index.asp#Support
And which BIOS version is on there?
Now to the 5 beeps, this should be, no console Input, or output devcie is found, meaning, keyboard/mouse, or monitor not detected.
Please use a wired USB keyboard and mouse, and connect a monitor to the graphics card, because all 3 have to be detected.
In BIOS>> Advanced>> Chipset configuration, Above 4G decoding must be set to enabled, CAM Clever Access memory, you can try to set to disabled, because not all graphics card can work with it.
And under Boot, set CSM to Disabled.
Now it should work.
It it works, try this one card on every slot, if that works all slots work.
PCIE lanes also come from the CPU, please check if the pins in the CPU socket are okay, and do not mount the CPU cooler too tight, this can cause the CPU and socket, to bend under the pressure and can cause contact problems, usually this cause memory problems, or PCIE slots that don't work properly]]> Mon, 28 Mar 2022 21:02:20 +0000 https://forum.asrock.com/forum_posts.asp?TID=21091&PID=97625&title=asrock-h510-pro-btc-error#97625 https://forum.asrock.com/forum_posts.asp?TID=21091&PID=97620&title=asrock-h510-pro-btc-error#97620 Author: Liandri
Subject: 21091
Posted: 28 Mar 2022 at 12:39pm

Is the same problem i try to reset my cmos but no video only 5 beeps.]]> Mon, 28 Mar 2022 12:39:39 +0000 https://forum.asrock.com/forum_posts.asp?TID=21091&PID=97620&title=asrock-h510-pro-btc-error#97620 https://forum.asrock.com/forum_posts.asp?TID=21091&PID=92655&title=asrock-h510-pro-btc-error#92655 Author: ASRock_TSD
Subject: 21091
Posted: 14 Jan 2022 at 6:00pm

Hi activoads,

Thank you for your post.

5 beeps error code means the problem may be related to the CPU or the system not detect video output.

Please verify by the below suggestions.
1. Make sure the video cable is connected to the graphic card.
2. Clear CMOS by referring to the user manual page. 16.
User manual: https://download.asrock.com/Manual/H510%20Pro%20BTC%2b.pdf
3. Only install CPU, PSU, Cooler, RAM, Graphics card to check if the system can boot into BIOS setup.
4. Install one stick RAM on each slot by turns to repeat suggestion 2 to check if the problem relates to a specific RAM stick or slot.
5. If possible, please use other CPUs and RAM to cross-test to check if the problem relates to the compatibility of the memory and CPU.

Also, about the Molex connector, please refer to our below link to check our recommendation setup.
https://www.asrock.com/support/faq.asp?id=503

All the best,
ASRock TSD
]]> Fri, 14 Jan 2022 18:00:10 +0000 https://forum.asrock.com/forum_posts.asp?TID=21091&PID=92655&title=asrock-h510-pro-btc-error#92655 https://forum.asrock.com/forum_posts.asp?TID=21091&PID=92634&title=asrock-h510-pro-btc-error#92634 Author: activoads
Subject: 21091
Posted: 13 Jan 2022 at 4:31am

Hello,

I have a new motherboard H510 Pro BTC+, when i turn on the motherboard it gives me 5 beeps, when i take the GPU out it runs normally.

I tried 3 GPUs already and all the same i get 5 beeps without screen or anything.

I did update the bios already.

Need Help.

BTW, on the motherboard i plugged not all the molex cables only two.]]> Thu, 13 Jan 2022 04:31:13 +0000 https://forum.asrock.com/forum_posts.asp?TID=21091&PID=92634&title=asrock-h510-pro-btc-error#92634