https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Wed, 10 Jun 2026 07:38:33 +0000 Tue, 19 Jul 2022 19:27:59 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=24748 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=24748&PID=100635&title=asrock-dr-debug-error-codes-help#100635 Author: Antoniioo77
Subject: 24748
Posted: 19 Jul 2022 at 7:27pm

Thanks, I tried to disconnect a sata cable that was not in use, the cable was only connected to the motherboard without the SSD, it also did a reading of it or something and it was the cause of the slow problem

Startup is great now, thanks.

if you could help me with this
If I activate the xmp profile of the ram, that slow startup occurs again and I get this screen before the windows logo

the system failed to boot several times before

Then I let the 10 seconds pass and windows starts.]]> Tue, 19 Jul 2022 19:27:59 +0000 https://forum.asrock.com/forum_posts.asp?TID=24748&PID=100635&title=asrock-dr-debug-error-codes-help#100635 https://forum.asrock.com/forum_posts.asp?TID=24748&PID=100634&title=asrock-dr-debug-error-codes-help#100634 Author: Xaltar
Subject: 24748
Posted: 19 Jul 2022 at 6:43pm

The debug display is supposed to show those codes. It's basically telling you what
part of the POST process is happening. The only time a code indicates an error is
if the system freezes or does not boot, then whatever code is frozen on the debug
display will tell you what part of the POST (power on self test) failed.

A slow booting system is another issue entirely and the debug codes won't tell you
what the problem is directly. The only way it can be useful (debug codes) is to
see what code remains on the display longest.

For example, if your debug display shows a 9A code for 30 seconds then you might
have a faulty or incompatible USB device connected to your system that is causing
that part of the POST process to be slower than normal. A 99 code could indicate
a faulty keyboard or mouse etc. I have seen systems boot slowly because a key
on the keyboard was stuck.

The debug codes will usually clear by the time your desktop loads. So long as
they clear there is no problem. Sometimes a code might persist after waking from
sleep but that isn't cause for concern, it will typically clear when you reboot
the system. ]]> Tue, 19 Jul 2022 18:43:39 +0000 https://forum.asrock.com/forum_posts.asp?TID=24748&PID=100634&title=asrock-dr-debug-error-codes-help#100634 https://forum.asrock.com/forum_posts.asp?TID=24748&PID=100633&title=asrock-dr-debug-error-codes-help#100633 Author: Antoniioo77
Subject: 24748
Posted: 19 Jul 2022 at 6:19pm

I have more codes error. I dont can upload video here?]]> Tue, 19 Jul 2022 18:19:27 +0000 https://forum.asrock.com/forum_posts.asp?TID=24748&PID=100633&title=asrock-dr-debug-error-codes-help#100633 https://forum.asrock.com/forum_posts.asp?TID=24748&PID=100632&title=asrock-dr-debug-error-codes-help#100632 Author: Antoniioo77
Subject: 24748
Posted: 19 Jul 2022 at 6:17pm

Hi, My system Windows 11 new in one z690 Asrock velocita

It starts very slow and reads Manu error Codes on the motherboard display, when It reaches the Windows logo from there is the fast 1 minute reading Codes before reaching the logo. Accompanied by 12900k, ddr5 32gb vengeance 6000mhz and WD SN 850 2TB

Is new installation.


55     The Memory could not be detected. Please re-install the memory and CPU. If the problem still exists, please install only one memory module or try using other memory modules.

I'm running the default bios, restart the bios and it's still the same, if I run the fast boot those codes take only about 10 seconds and not 1 minute, also with the fast boot disabled, it shouldn't take so long, right? even my hdd can do it faster


22 - OEM pre-memory initialization codes
69 - System Agent DXE initialization is started
22 - OEM pre-memory initialization codes
7F - Reserved for future AMI DXE codes
00 - Not used
99 - Super IO Initialization
98 - Console input devices connect
B6 - Clean-up of NVRAM
9A - USB initialization is started
88 - OEM DXE initialization codes
28 - OEM pre-memory initialization codes      not safe
29 - OEM pre-memory initialization codes    not safe
9C - USB Detect
A8 - Setup Verifying Password
99 - Super IO Initialization
98 - Console input devices connect]]> Tue, 19 Jul 2022 18:17:50 +0000 https://forum.asrock.com/forum_posts.asp?TID=24748&PID=100632&title=asrock-dr-debug-error-codes-help#100632