https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Fri, 17 Jul 2026 00:53:07 +0000 Thu, 08 Aug 2024 08:13:57 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=24833 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=24833&PID=137896&title=pc-not-starting-after-adding-new-m-2-ssd#137896 Author: RynosRaceroom
Subject: 24833
Posted: 08 Aug 2024 at 8:13am

Thank you for your help !]]> Thu, 08 Aug 2024 08:13:57 +0000 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=137896&title=pc-not-starting-after-adding-new-m-2-ssd#137896 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=136802&title=pc-not-starting-after-adding-new-m-2-ssd#136802 Author: Lord-Electron
Subject: 24833
Posted: 01 Aug 2024 at 9:22pm

[Edit]: I forgot that I changed another setting prior, allowing the NVMe RAID mode to work.

Try ALSO setting [Boot\CSM (Compatibility Support Module)\CSM] to [Disabled]

The combination of both settings worked for me. (It must be both, I tried them individually and they didn't work)

Drive: Crucial P3 1TB NVMe SSD
Motherboard: ASRock A320M-HDV R4.0
CPU: Ryzen 3 2300X
PSU: Thermaltake Smart 600W
Graphics card: ASUS GTX 970 Strix 4GB
RAM: XPG ADATA 8GB DDR4 2666MHz]]> Thu, 01 Aug 2024 21:22:56 +0000 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=136802&title=pc-not-starting-after-adding-new-m-2-ssd#136802 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=136506&title=pc-not-starting-after-adding-new-m-2-ssd#136506 Author: Lord-Electron
Subject: 24833
Posted: 01 Aug 2024 at 10:11am

Try setting [Advanced\AMD PBS\NVMe RAID mode] to [Enabled].

I had previously updated my UEFI to 2.3 (which didn't solve the issue).
Then, I tried the above, and it worked!

Drive: Crucial P3 1TB NVMe SSD
Motherboard: ASRock A320M-HDV R4.0
CPU: Ryzen 3 2300X
PSU: Thermaltake Smart 600W
Graphics card: ASUS GTX 970 Strix 4GB
RAM: XPG ADATA 8GB DDR4 2666MHz]]> Thu, 01 Aug 2024 10:11:09 +0000 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=136506&title=pc-not-starting-after-adding-new-m-2-ssd#136506 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=108801&title=pc-not-starting-after-adding-new-m-2-ssd#108801 Author: RynosRaceroom
Subject: 24833
Posted: 29 Dec 2023 at 7:13am

This is frustrating ! I dont know if I should update the bios return my crucial drive or maybe look at buying a new used motherboard of a different type manufacture. All I hear about is if you're not using an NVMESSD then you're not going as fast as possible. Has anyone found a specific one that works ]]> Fri, 29 Dec 2023 07:13:53 +0000 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=108801&title=pc-not-starting-after-adding-new-m-2-ssd#108801 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=108580&title=pc-not-starting-after-adding-new-m-2-ssd#108580 Author: jwzy
Subject: 24833
Posted: 13 Dec 2023 at 7:07pm

Thank you this worked!

I had this same issue too, was trying to install Crucial P3 500GB onto my ASROCK B450 Pro4 F. Booted and got stuck at the ASROCK logo screen, keyboard inputs don't work.

Updated BIOS from 1.60 to 2.80 and it works now (got the BIOS files from this link https://www.asrock.com/mb/AMD/B450M%20Pro4-F/#BIOS)]]> Wed, 13 Dec 2023 19:07:19 +0000 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=108580&title=pc-not-starting-after-adding-new-m-2-ssd#108580 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=106980&title=pc-not-starting-after-adding-new-m-2-ssd#106980 Author: superjoeprime
Subject: 24833
Posted: 13 Aug 2023 at 2:45am

I had same issue, and my bios was 3.70 i installed Version 3.80 it has m.2 fix. And works now. There is bios fix for everyone. ]]> Sun, 13 Aug 2023 02:45:14 +0000 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=106980&title=pc-not-starting-after-adding-new-m-2-ssd#106980 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=106874&title=pc-not-starting-after-adding-new-m-2-ssd#106874 Author: Quesada
Subject: 24833
Posted: 05 Aug 2023 at 10:16am

For me the NVME Sanitation Tool fixed it. Run it with the format setting and reinstall Windows.]]> Sat, 05 Aug 2023 10:16:39 +0000 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=106874&title=pc-not-starting-after-adding-new-m-2-ssd#106874 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=104948&title=pc-not-starting-after-adding-new-m-2-ssd#104948 Author: wolf2021k
Subject: 24833
Posted: 25 May 2023 at 3:13am

wolf2021k wrote: I have the same problem: Different hardware though, -B450M Pro4 -Crucial P3 M.2 1TB PCIE Gen3x4 2280 -Ryzen 5 2600X -Radeon RX580 -BIOS 3.50 Current Bootdrive is Crucial P1 M.2 500GB PCIE Gen3x4 2280, which I want to replace with the above mentioned P3. After Removing the Crucial P1 and installing the P3 on the same slot the PC stops in at the Bootscreen, and I am unable to even enter Bios, it does not react on any keyboard inputs.

I was hesitating to update the Bios since I have an older CPU, however today I bit the bullet and installed Bios version 5.70 and it works great now. ]]> Thu, 25 May 2023 03:13:56 +0000 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=104948&title=pc-not-starting-after-adding-new-m-2-ssd#104948 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=104307&title=pc-not-starting-after-adding-new-m-2-ssd#104307 Author: fredd0h
Subject: 24833
Posted: 04 Apr 2023 at 8:01am

Posting this to hopefully help another find the solution faster. I eventually found this thread via Google search for my problem.

I have an IBUYPOWER BB980 that has the asrock b365m ib-r mobo in it.
I was trying to install a crucial p3 plus PCIe 4.0 NVMe m.2 ssd and if I installed it, the system would hang on the boot screen and not allow F2 to get into bios.

After bios update, mobo recognized the drive and system booted as expected.

Used this to get the bios
https://www.asrock.com/support/index.us.asp?cat=SIBIOS

And this to install it
https://www.asrock.com/support/BIOSIG.asp?cat=BIOS10


Hopefully this helps]]> Tue, 04 Apr 2023 08:01:11 +0000 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=104307&title=pc-not-starting-after-adding-new-m-2-ssd#104307 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=104132&title=pc-not-starting-after-adding-new-m-2-ssd#104132 Author: bigwhiteshih
Subject: 24833
Posted: 20 Mar 2023 at 11:06am

Same problem on my Fatal1ty AB350 Gaming K4 board with Crucial P3(Gen3) 1TB M.2 NVMe SSD.

I was using XPG SX8200Pro 512GB M.2 NVMe (as storage, not booting device) without any problem, after changing to Crucial P3, my PC boot with blank screen and no beep. Then I removed Crucial P3, my PC boot up normally.

Finally I update BIOS to the latest version 7.40 (AMD AM4 AGESA Combo V2 PI 1.2.0.7 kernel), voila! problem solved! Crucial P3 works perfectly fine.
BTW my BIOS version was 5.80 (AMD AGESA Combo-AM4 1.0.0.1)]]> Mon, 20 Mar 2023 11:06:07 +0000 https://forum.asrock.com/forum_posts.asp?TID=24833&PID=104132&title=pc-not-starting-after-adding-new-m-2-ssd#104132