https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Thu, 16 Apr 2026 14:49:20 +0000 Fri, 06 Jan 2023 23:56:40 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=25276 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=25276&PID=102767&title=ram-issue-with-5600g-install#102767 Author: teb2500
Subject: 25276
Posted: 06 Jan 2023 at 11:56pm

thx for the reply - have already cleared the slot - no change. i'm thinking i'm limited to the one slot until it's time for a new board.]]> Fri, 06 Jan 2023 23:56:40 +0000 https://forum.asrock.com/forum_posts.asp?TID=25276&PID=102767&title=ram-issue-with-5600g-install#102767 https://forum.asrock.com/forum_posts.asp?TID=25276&PID=102748&title=ram-issue-with-5600g-install#102748 Author: eccential
Subject: 25276
Posted: 06 Jan 2023 at 4:11am

Just an idea. Make sure DIMM B1 slot is clean. Use compressed air to blow away anything that could be stuck in there.

You had to send the MB to AsRock to get the BIOS updated, right? That's a scary thought.... I mean, the shipping both ways, and who knows who does what with it....
]]> Fri, 06 Jan 2023 04:11:52 +0000 https://forum.asrock.com/forum_posts.asp?TID=25276&PID=102748&title=ram-issue-with-5600g-install#102748 https://forum.asrock.com/forum_posts.asp?TID=25276&PID=102739&title=ram-issue-with-5600g-install#102739 Author: teb2500
Subject: 25276
Posted: 05 Jan 2023 at 8:56pm

thx for the reply!

i did clear the cmos via a jumper and had no change. an asrock tech support told me "Seems your CPU (5600G ) might have some problems with memory controller (which is inside your CPU)". it's a brand new cpu so i'm at a loss right now what to do.]]> Thu, 05 Jan 2023 20:56:50 +0000 https://forum.asrock.com/forum_posts.asp?TID=25276&PID=102739&title=ram-issue-with-5600g-install#102739 https://forum.asrock.com/forum_posts.asp?TID=25276&PID=102713&title=ram-issue-with-5600g-install#102713 Author: ChairmanSaab
Subject: 25276
Posted: 04 Jan 2023 at 4:38am

Please try clearing the CMOS, take out the battery and let it sit outside for 30 minutes, reseat it and check. Warning, this will reset all BIOS settings.]]> Wed, 04 Jan 2023 04:38:54 +0000 https://forum.asrock.com/forum_posts.asp?TID=25276&PID=102713&title=ram-issue-with-5600g-install#102713 https://forum.asrock.com/forum_posts.asp?TID=25276&PID=102625&title=ram-issue-with-5600g-install#102625 Author: teb2500
Subject: 25276
Posted: 30 Dec 2022 at 3:01am

MB: Fatal1ty B450 Gaming-ITX/ac
BIOS: 5.20
CPU: 5600G
RAM: 16GB DDR4-2400 (2x8GB)
SSD: WD SN770 1TB

Hi there - posted a short while ago about upgrading the bios on my MB for a new 5600G. Had a 2200G previously and was told by Asrock I needed an interim cpu to get the bios upgraded - long story made short - sent MB to Asrock and they upgraded for me.

Rec'd MB and installed new SSD with previous RAM modules (worked perfectly with 2200G/3.30 bios). Can't get both RAM modules to work now - only one will work when in A1 slot. (It's not the RAM - both will work on their own in the A1 slot.) When I add the second module in the B1 slot, CPU fan will come on but chassis fans will not - computer will shut down and then attempt to start up again. Never gets to Asrock start up screen. Thought it might be a power issue and installed a new 700 watt power supply - nothing changed.

I haven't made any changes in the BIOS - I don't overclock or have done anything in BIOS that should have affected this.

Please let me know if I left any details out. Any assistance is greatly appreciated! Thanks!


]]> Fri, 30 Dec 2022 03:01:45 +0000 https://forum.asrock.com/forum_posts.asp?TID=25276&PID=102625&title=ram-issue-with-5600g-install#102625