https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Thu, 16 Apr 2026 03:47:12 +0000 Fri, 04 Aug 2023 03:14:50 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=26239 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=26239&PID=106855&title=am5-b650m-pro-rs-xmp-profile-not-working#106855 Author: shibby
Subject: 26239
Posted: 04 Aug 2023 at 3:14am

That did the trick, thank you!
Yoda said: More patient you have to be little Padawan...]]> Fri, 04 Aug 2023 03:14:50 +0000 https://forum.asrock.com/forum_posts.asp?TID=26239&PID=106855&title=am5-b650m-pro-rs-xmp-profile-not-working#106855 https://forum.asrock.com/forum_posts.asp?TID=26239&PID=106852&title=am5-b650m-pro-rs-xmp-profile-not-working#106852 Author: M440
Subject: 26239
Posted: 04 Aug 2023 at 2:24am

shibby wrote: Hi folks! I just set up my new PC with the following components: - AsRock B650M Pro RS - Ryzen 5 7600 (currently using integrated GPU) - 2x16GB Corsair Vengeance DDR5-5600 CL36 @1.25V (CMK32GX5M2B5600C36) - Seasonic Focus GX 550W PSU - Western Digital SN850X NVMe SSD (1TB) The system is running perfectly with the default settings (RAM at 4800 MHz). The memory is listed (XMP verified at 5600 MHz) in AsRock's official support table. However when I try to load the XMP profile and save & reboot in BIOS, the system is not booting at all respectively it's running but the display remains in standby mode. I have to clear the CMOS via jumper bridge in order to make it boot again with the default settings. Any idea? Thanks a lot in advance!

the first memory training takes 5 minutes. After first memory training it is booting fast.

Have you waited that long?]]> Fri, 04 Aug 2023 02:24:05 +0000 https://forum.asrock.com/forum_posts.asp?TID=26239&PID=106852&title=am5-b650m-pro-rs-xmp-profile-not-working#106852 https://forum.asrock.com/forum_posts.asp?TID=26239&PID=106841&title=am5-b650m-pro-rs-xmp-profile-not-working#106841 Author: shibby
Subject: 26239
Posted: 03 Aug 2023 at 2:31am

Hi folks!

I just set up my new PC with the following components:

- AsRock B650M Pro RS
- Ryzen 5 7600 (currently using integrated GPU)
- 2x16GB Corsair Vengeance DDR5-5600 CL36 @1.25V (CMK32GX5M2B5600C36)
- Seasonic Focus GX 550W PSU
- Western Digital SN850X NVMe SSD (1TB)

The system is running perfectly with the default settings (RAM at 4800 MHz).
The memory is listed (XMP verified at 5600 MHz) in AsRock's official support table. However when I try to load the XMP profile and save & reboot in BIOS, the system is not booting at all respectively it's running but the display remains in standby mode. I have to clear the CMOS via jumper bridge in order to make it boot again with the default settings.

Any idea?
Thanks a lot in advance!

]]> Thu, 03 Aug 2023 02:31:21 +0000 https://forum.asrock.com/forum_posts.asp?TID=26239&PID=106841&title=am5-b650m-pro-rs-xmp-profile-not-working#106841