ASRock Forums : Where to fit a camera disc? https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Thu, 30 Apr 2026 17:56:10 +0000 Fri, 20 May 2016 15:12:02 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=2693 <![CDATA[ASRock Forums]]> https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ <![CDATA[Where to fit a camera disc? : The plate on the bottom of the...]]> https://forum.asrock.com/forum_posts.asp?TID=2693&PID=13341&title=where-to-fit-a-camera-disc#13341 Author: BrickBrian
Subject: 2693
Posted: 20 May 2016 at 3:12pm

The plate on the bottom of the camera says; 
"PanasonicDMC-TZ55
CE560
Panasonic corporation
UQ4DA037071

On the caera front it has;
LUMIX DC VARIO 
1:3.3-6.4/4.3-86 ASPH
20X Full HD

If I remember correctly the distributor was so tight there was no cable with the camera.  My experience with using a cable with other cameras is that it's so slow adn I use a card reader with my cannon but the one I have does not accept the Lumix card and although it fitted into the front of the computer last time it wont this time.  
]]> Fri, 20 May 2016 15:12:02 +0000 https://forum.asrock.com/forum_posts.asp?TID=2693&PID=13341&title=where-to-fit-a-camera-disc#13341 <![CDATA[Where to fit a camera disc? : BrickBrian wrote: I have an...]]> https://forum.asrock.com/forum_posts.asp?TID=2693&PID=13337&title=where-to-fit-a-camera-disc#13337 Author: parsec
Subject: 2693
Posted: 20 May 2016 at 12:02pm

Originally posted by BrickBrian BrickBrian wrote:

I have an ASRock H67M-GE and my wife has a Lumix camera with a 4GB Sandisc which I can't fit into the Tower unit.  I can see that there are a number of slots of different sizes but can't work out which one is the right one and which way up the disc should be.  Is there a diagram I could see and if so where can I find it.  Many thanks.


You will need to be much more specific about that camera. Lumix is a Panasonic brand name for many different kinds of cameras.

If it is just a standard digital camera, are you trying to connect this camera to the PC to save the pictures? If so, that is normally done with a USB cable connected between the camera and PC.

Camera's like this include the USB cable, since they usually use a micro-USB connector on the camera. The cable then has a standard USB connector on the other end for connection to a PC.

Another possibility, if the camera does not have a USB output, is the camera has a memory card that can be removed and put into a card reader that is connected to the PC. That is what it seems you are trying to do.

Camera memory cards, currently the "SD" types are common, of any kind cannot be connected directly to a PC mother board. The interface on the memory card is not used by PC mother boards.

You must get a card reader that is compatible with the memory card you have. It might not be an SD card, you need to find out the type of memory card that camera uses.

I would check for a USB output before getting a memory card reader.

]]> Fri, 20 May 2016 12:02:35 +0000 https://forum.asrock.com/forum_posts.asp?TID=2693&PID=13337&title=where-to-fit-a-camera-disc#13337 <![CDATA[Where to fit a camera disc? : I have an ASRock H67M-GE and...]]> https://forum.asrock.com/forum_posts.asp?TID=2693&PID=13336&title=where-to-fit-a-camera-disc#13336 Author: BrickBrian
Subject: 2693
Posted: 20 May 2016 at 7:06am

I have an ASRock H67M-GE and my wife has a Lumix camera with a 4GB Sandisc which I can't fit into the Tower unit.  I can see that there are a number of slots of different sizes but can't work out which one is the right one and which way up the disc should be.  Is there a diagram I could see and if so where can I find it.  Many thanks.]]> Fri, 20 May 2016 07:06:52 +0000 https://forum.asrock.com/forum_posts.asp?TID=2693&PID=13336&title=where-to-fit-a-camera-disc#13336