https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Sun, 21 Jun 2026 06:20:39 +0000 Mon, 06 Jun 2016 22:05:42 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=2797 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=2797&PID=13979&title=asrock-h87-pro4#13979 Author: Yoshi95
Subject: 2797
Posted: 06 Jun 2016 at 10:05pm

Hello there, newcomer here with some trouble. 
TL;DR

Need someone with an asrock H87 pro4 motherboard to confirm a set of ceramic capacitors, as to their color and order, according to the numbering on the following picture.
Numbers 1-9 are the pins i'm interested in number 10 is where the big capacitor would go but it was empty from the beginning, so here it goes

1 Black 2 Black 3-4 nothing 5black 6black 7brown 8nothing 9 brown 10 nothing.



How the board looks like atm



Long story:  one of my asrock boards had its I/O chip messed up, and it was unfortunately out of warranty. The service place asked 35Euros to do it, so i wen't on doing it myself.
While i was removing the old chip, to prepaire the board for the incoming new one a friend just blasts through the door. Needless to say the chip fell on the side and picked up some capacitors while the solder was still hot, 2 of which got  lost in solder... RIP. if i remember correctly it was two blacks and one brown.

Edited by Yoshi95 - 07 Jun 2016 at 12:35am]]> Mon, 06 Jun 2016 22:05:42 +0000 https://forum.asrock.com/forum_posts.asp?TID=2797&PID=13979&title=asrock-h87-pro4#13979