ASRock Forums : dr debug code 00 https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Fri, 19 Jun 2026 12:40:45 +0000 Wed, 13 Jul 2016 00:29:11 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=2834 <![CDATA[ASRock Forums]]> https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ <![CDATA[dr debug code 00 : http://www.asrock.com/mb/Intel/Z77%20Extreme4/?cat=CPU...]]> https://forum.asrock.com/forum_posts.asp?TID=2834&PID=14895&title=dr-debug-code-00#14895 Author: Packard93
Subject: 2834
Posted: 13 Jul 2016 at 12:29am

http://www.asrock.com/mb/Intel/Z77%20Extreme4/?cat=CPU  You will need bios 1.20 flashed on the motherboard bios .Go to the list compatibility shows 1.20 for the GS540 CELERON YOUR trying to use . What does the bios chip sticker say is on it? Have u looked at that bios sticker to see what version is flashed on your board.]]> Wed, 13 Jul 2016 00:29:11 +0000 https://forum.asrock.com/forum_posts.asp?TID=2834&PID=14895&title=dr-debug-code-00#14895 <![CDATA[dr debug code 00 : i tryed almost everything but...]]> https://forum.asrock.com/forum_posts.asp?TID=2834&PID=14318&title=dr-debug-code-00#14318 Author: mr.smile
Subject: 2834
Posted: 21 Jun 2016 at 4:33am

Ouch i tryed almost everything but still stays in debug code 00
 
 


Edited by mr.smile - 21 Jun 2016 at 4:41am]]> Tue, 21 Jun 2016 04:33:59 +0000 https://forum.asrock.com/forum_posts.asp?TID=2834&PID=14318&title=dr-debug-code-00#14318 <![CDATA[dr debug code 00 : mr.smile wrote: thank you...]]> https://forum.asrock.com/forum_posts.asp?TID=2834&PID=14135&title=dr-debug-code-00#14135 Author: parsec
Subject: 2834
Posted: 13 Jun 2016 at 9:15am

Originally posted by mr.smile mr.smile wrote:

thank you for the tip i will try all those tips
 
the board is not new and i was only using de 4 pin
 
the sticker of the bios version is missing
 
and the cpu is Intel Celeron G540, 2.5GHz, LGA1155, 2-cores??
 
grtzz Ron


The four pin CPU power connector is just fine for a G540 processor. You do not need an eight pin connector. The four pin cable should be connected on the right side of the connector on the board, that has pins 1 and 5.

A G540 should not need a BIOS update, it just needs at least BIOS version 1.20.

I hope the board and CPU still work, and the power supply is good too.
]]> Mon, 13 Jun 2016 09:15:05 +0000 https://forum.asrock.com/forum_posts.asp?TID=2834&PID=14135&title=dr-debug-code-00#14135 <![CDATA[dr debug code 00 : thank you for the tip i will...]]> https://forum.asrock.com/forum_posts.asp?TID=2834&PID=14133&title=dr-debug-code-00#14133 Author: mr.smile
Subject: 2834
Posted: 13 Jun 2016 at 8:42am

thank you for the tip i will try all those tips
 
the board is not new and i was only using de 4 pin
 
the sticker of the bios version is missing
 
and the cpu is Intel Celeron G540, 2.5GHz, LGA1155, 2-cores??
 
grtzz Ron
]]> Mon, 13 Jun 2016 08:42:55 +0000 https://forum.asrock.com/forum_posts.asp?TID=2834&PID=14133&title=dr-debug-code-00#14133 <![CDATA[dr debug code 00 : mr.smile wrote: hi can anyone...]]> https://forum.asrock.com/forum_posts.asp?TID=2834&PID=14130&title=dr-debug-code-00#14130 Author: parsec
Subject: 2834
Posted: 13 Jun 2016 at 7:43am

Originally posted by mr.smile mr.smile wrote:

hi can anyone help me please ?
 
i have a z77 extreme 4 motherboard and it won't post
it stay's in 00 code at the beginning
 
i tried to install the cpu again but it stay's the samen and no beeps
 
gr Ron


Although the code 00 is listed as "Not used" in your board's manual, for many other ASRock boards the 00 code means a problem with the CPU, and to install it again. You know that and have tried that, with no change.

The 00 code description also suggests clearing the CMOS/BIOS. Did you try that?

Questions for you:

Is this the first time you used your Z77 Extreme4 board? Did you buy it new?

What CPU are you using? Is the CPU new, or did you use it in another board?

Do you know what BIOS version is in your board? The BIOS version that came with the board from the factory is printed on a sticker that is on the BIOS chip. The BIOS chip is just above the Dr Debug display.

What CPU cooler are you using?

Did you connect the 4/8 pin 12V ATX CPU power cable from the power supply to the board? That's the connector at the top of the board, next to the heat sink with "Z77" on it.

You must connect a power cable from the power supply to the 4/8 pin 12V ATX CPU connector, or the CPU will not get any power, and will not work. You may use either a four pin or eight pin connector when connecting that cable to the board.
]]> Mon, 13 Jun 2016 07:43:47 +0000 https://forum.asrock.com/forum_posts.asp?TID=2834&PID=14130&title=dr-debug-code-00#14130 <![CDATA[dr debug code 00 : hi can anyone help me please...]]> https://forum.asrock.com/forum_posts.asp?TID=2834&PID=14129&title=dr-debug-code-00#14129 Author: mr.smile
Subject: 2834
Posted: 13 Jun 2016 at 6:52am

hi can anyone help me please ?
 
i have a z77 extreme 4 motherboard and it won't post
it stay's in 00 code at the beginning
 
i tried to install the cpu again but it stay's the samen and no beeps
 
gr Ron
]]> Mon, 13 Jun 2016 06:52:16 +0000 https://forum.asrock.com/forum_posts.asp?TID=2834&PID=14129&title=dr-debug-code-00#14129