ASRock Forums : Z170 Extreme 6 SkyOC https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Sun, 21 Jun 2026 18:52:13 +0000 Tue, 30 Aug 2016 21:06:32 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=3338 <![CDATA[ASRock Forums]]> https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ <![CDATA[Z170 Extreme 6 SkyOC : Awesome to hear. Thanks for the...]]> https://forum.asrock.com/forum_posts.asp?TID=3338&PID=16354&title=z170-extreme-6-skyoc#16354 Author: Xaltar
Subject: 3338
Posted: 30 Aug 2016 at 9:06pm

Awesome to hear. Thanks for the info Parsec.]]> Tue, 30 Aug 2016 21:06:32 +0000 https://forum.asrock.com/forum_posts.asp?TID=3338&PID=16354&title=z170-extreme-6-skyoc#16354 <![CDATA[Z170 Extreme 6 SkyOC : Lowering the FCLK worked, pushed...]]> https://forum.asrock.com/forum_posts.asp?TID=3338&PID=16352&title=z170-extreme-6-skyoc#16352 Author: b0rys
Subject: 3338
Posted: 30 Aug 2016 at 6:27pm

Lowering the FCLK worked, pushed it to 168 (previously always froze @ ~163) and still rising. Problem solved.
I thought it was SkyOC because lot of ppl reported achieving slightly higher clocks with non-K UEFIs on this specific CPU.
Thanks.


Edited by b0rys - 30 Aug 2016 at 6:28pm]]> Tue, 30 Aug 2016 18:27:52 +0000 https://forum.asrock.com/forum_posts.asp?TID=3338&PID=16352&title=z170-extreme-6-skyoc#16352 <![CDATA[Z170 Extreme 6 SkyOC : b0rys wrote:I updated the UEFI...]]> https://forum.asrock.com/forum_posts.asp?TID=3338&PID=16351&title=z170-extreme-6-skyoc#16351 Author: parsec
Subject: 3338
Posted: 30 Aug 2016 at 6:02pm

Originally posted by b0rys b0rys wrote:

I updated the UEFI to latest 2.6 on Extreme 6, after downgrading to 1.8 SkyOC is still not there and won't come back because of Intel's ME. Would getting the UEFI chips out of MB and flashing with an external programmer downgrade the ME so I could use SkyOC again?

My cpu is i7 6700 engineering sample, they're not BCLK locked so lack of SkyOC is not a big problem, but I can't get past ~160 BCLK without SkyOC (multiplier is max x24 so I need over 160 BCLK to even get close to 4GHz)


Was it the IME firmware or a CPU microcode update (or both) in a UEFI update that killed Sky OC?

Add to that the apparent Windows update that did either or both. Are you aware of that?

So the IME firmware version remained the same after the change to 1.80? What about the CPU microcode?

Regardless, your basic theory should be correct. Actually, what UEFI version is in your board's backup B UEFI chip? The B Backup UEFI chip should be untouched from any UEFI updates AFAIK. That of course depends upon the UEFI version that came with your board. I have an early Z170 Extreme7+ with the 1.00 or 1.10 UEFI, so I still have Sky OC on the backup chip. Or, unless an owner moved the UEFI chips around themselves.

I've read at a UEFI/BIOS modding website that the IME firmware in ASRock UEFIs is "locked", and cannot be updated with the UEFI modding tool they use. If an external programmer can overcome that, I don't know, and their is still the question of CPU microcode vs IME firmware.

http://www.win-raid.com/t154f16-Tool-Guide-News-quot-UEFI-BIOS-Updater-quot-UBU.html

Are you sure it's the lack of Sky OC that is preventing you to set the BCLK beyond 160MHz? I recall an option in the UEFI that I think will do that. That's the FCLK Frequency option in OC Tweaker, which I see in your board's manual. I could be wrong about that... Confused
]]> Tue, 30 Aug 2016 18:02:12 +0000 https://forum.asrock.com/forum_posts.asp?TID=3338&PID=16351&title=z170-extreme-6-skyoc#16351 <![CDATA[Z170 Extreme 6 SkyOC : You can try ordering a new BIOS...]]> https://forum.asrock.com/forum_posts.asp?TID=3338&PID=16349&title=z170-extreme-6-skyoc#16349 Author: Xaltar
Subject: 3338
Posted: 30 Aug 2016 at 5:52pm

You can try ordering a new BIOS chip preflashed with the BIOS and ME version you need from ASRock directly.

That said I don't think you need to go quite that far yet (the method you suggested or getting a new chip)

What version is your BIOS B using? 
If it is still the factory BIOS and supports SkyOC then just switch to BIOS B using the BIOS selection switch. 

Check to see if you can use SkyOC with BIOS B selected, if so then restore BIOS A using BIOS B following the instructions in your user manual. 

If that fails then physically swap the BIOS chips over and select A again.
]]> Tue, 30 Aug 2016 17:52:53 +0000 https://forum.asrock.com/forum_posts.asp?TID=3338&PID=16349&title=z170-extreme-6-skyoc#16349 <![CDATA[Z170 Extreme 6 SkyOC : I updated the UEFI to latest 2.6...]]> https://forum.asrock.com/forum_posts.asp?TID=3338&PID=16348&title=z170-extreme-6-skyoc#16348 Author: b0rys
Subject: 3338
Posted: 30 Aug 2016 at 4:33pm

I updated the UEFI to latest 2.6 on Extreme 6, after downgrading to 1.8 SkyOC is still not there and won't come back because of Intel's ME. Would getting the UEFI chips out of MB and flashing with an external programmer downgrade the ME so I could use SkyOC again?

My cpu is i7 6700 engineering sample, they're not BCLK locked so lack of SkyOC is not a big problem, but I can't get past ~160 BCLK without SkyOC (multiplier is max x24 so I need over 160 BCLK to even get close to 4GHz)
]]> Tue, 30 Aug 2016 16:33:35 +0000 https://forum.asrock.com/forum_posts.asp?TID=3338&PID=16348&title=z170-extreme-6-skyoc#16348