ASRock Forums : FM2A88X-ITX+

ASRock Forums : FM2A88X-ITX+ https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Fri, 10 Apr 2026 02:30:27 +0000 Tue, 01 Nov 2016 11:09:42 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=3692 <![CDATA[ASRock Forums]]> https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ <![CDATA[FM2A88X-ITX+ : The default, Auto speed of your...]]> https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18360&title=fm2a88xitx#18360 Author: parsec
Subject: 3692
Posted: 01 Nov 2016 at 11:09am

The default, Auto speed of your memory is 1333, that is normal.

Your memory will not automatically run at 2400, you must set it to 2400 yourself.

You can set the memory speed to 2400 by doing this:

In the BIOS, OC Tweaker screen, find the DRAM Frequency option, and set it to 2400. You will also need to set the DRAM Voltage to 1.65V. You will also need to go to the DRAM Timing Control screen, and set the memory timings to the correct values for the 2400 speed.

Or as wardog said, if you find an XMP setting in the DRAM Frequency options, select it and it should set the memory speed to 2400, and set the DRAM Voltage to 1.65V.

The information page for your memory on Corsair's website does not say it is compatible with AMD boards and processors. It does show two Intel boards, Z77 and X79. Scroll down on this page to the Contents and Specifications section:

http://www.corsair.com/en-us/dominator-platinum-with-corsair-link-connector-1-65v-16-gb-dual-channel-ddr3-memory-kit-cmd16gx3m2a2400c10
]]> Tue, 01 Nov 2016 11:09:42 +0000 https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18360&title=fm2a88xitx#18360 <![CDATA[FM2A88X-ITX+ : Chipset-----------------------...]]> https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18349&title=fm2a88xitx#18349 Author: chezmemo
Subject: 3692
Posted: 01 Nov 2016 at 1:52am

Chipset

-------------------------------------------------------------------------

Northbridge AMD K15 IMC rev. 00

Southbridge AMD A88X FCH rev. 2.6

Graphic Interface PCI-Express

PCI-E Link Width x0

PCI-E Max Link Width x0

Memory Type DDR3

Memory Size 16 GBytes

Channels Dual

Memory Frequency 1215.2 MHz (1:12)

CAS# latency (CL) 10.0

RAS# to CAS# delay (tRCD) 12

RAS# Precharge (tRP) 12

Cycle Time (tRAS) 31

Bank Cycle Time (tRC) 43

Uncore Frequency 1822.8 MHz

]]> Tue, 01 Nov 2016 01:52:47 +0000 https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18349&title=fm2a88xitx#18349 <![CDATA[FM2A88X-ITX+ : DIMM # 1SPD registers 00...]]> https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18348&title=fm2a88xitx#18348 Author: chezmemo
Subject: 3692
Posted: 01 Nov 2016 at 1:51am

DIMM # 1

SPD registers

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

00 92 11 0B 02 04 21 00 09 03 11 01 08 0C 00 2C 00

10 69 78 69 30 69 11 20 81 20 08 3C 3C 00 F0 83 81

20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

30 00 00 00 00 00 00 00 00 00 00 00 00 0F 22 01 01

40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

70 00 00 00 00 00 02 9E 01 00 00 00 00 00 00 D5 93

80 43 4D 44 31 36 47 58 33 4D 32 41 32 34 30 30 43

90 31 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00

A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

B0 0C 4A 01 13 01 08 01 08 11 2D 07 42 44 00 35 50

C0 50 6A 10 CE 1E 3E 00 25 08 42 2E 00 F6 3C 00 00

D0 0C 00 24 D6 F4 D8 D8 00 00 00 00 81 00 00 00 00

E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

DIMM # 2

SPD registers

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

00 92 11 0B 02 04 21 00 09 03 11 01 08 0C 00 2C 00

10 69 78 69 30 69 11 20 81 20 08 3C 3C 00 F0 83 81

20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

30 00 00 00 00 00 00 00 00 00 00 00 00 0F 22 01 01

40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

70 00 00 00 00 00 02 9E 01 00 00 00 00 00 00 D5 93

80 43 4D 44 31 36 47 58 33 4D 32 41 32 34 30 30 43

90 31 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00

A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

B0 0C 4A 01 13 01 08 01 08 11 2D 07 42 44 00 35 50

C0 50 6A 10 CE 1E 3E 00 25 08 42 2E 00 F6 3C 00 00

D0 0C 00 24 D6 F4 D8 D8 00 00 00 00 81 00 00 00 00

E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

]]> Tue, 01 Nov 2016 01:51:53 +0000 https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18348&title=fm2a88xitx#18348 <![CDATA[FM2A88X-ITX+ : DIMM # 2 SMBus address 0x51 Memory...]]> https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18347&title=fm2a88xitx#18347 Author: chezmemo
Subject: 3692
Posted: 01 Nov 2016 at 1:51am

DIMM # 2

SMBus address 0x51

Memory type DDR3

Module format UDIMM

Manufacturer (ID) Corsair (7F7F9E00000000000000)

Size 8192 MBytes

Max bandwidth PC3-10700 (667 MHz)

Part number CMD16GX3M2A2400C10

Number of banks 8

Nominal Voltage 1.50 Volts

EPP no

XMP yes

XMP revision 1.3

AMP no

JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency

JEDEC #1 6.0-6-6-17-22 @ 457 MHz

JEDEC #2 7.0-7-7-20-26 @ 533 MHz

JEDEC #3 9.0-9-9-24-33 @ 666 MHz

XMP profile XMP-2400

Specification PC3-19200

Voltage level 1.650 Volts

Min Cycle time 0.833 ns (1200 MHz)

Max CL 10.0

Min tRP 9.96 ns

Min tRCD 9.96 ns

Min tWR 13.25 ns

Min tRAS 25.75 ns

Min tRC 35.75 ns

Min tRFC 260.63 ns

Min tRTP 8.25 ns

Min tRRD 5.75 ns

Command Rate 1T

XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)

XMP #1 6.0-8-8-19-27-1T @ 728 MHz (1.650 Volts)

XMP #2 10.0-12-12-31-43-1T @ 1200 MHz (1.650 Volts)

]]> Tue, 01 Nov 2016 01:51:23 +0000 https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18347&title=fm2a88xitx#18347 <![CDATA[FM2A88X-ITX+ : DIMM # 1 SMBus address 0x50 Memory...]]> https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18346&title=fm2a88xitx#18346 Author: chezmemo
Subject: 3692
Posted: 01 Nov 2016 at 1:50am

DIMM # 1

SMBus address 0x50

Memory type DDR3

Module format UDIMM

Manufacturer (ID) Corsair (7F7F9E00000000000000)

Size 8192 MBytes

Max bandwidth PC3-10700 (667 MHz)

Part number CMD16GX3M2A2400C10

Number of banks 8

Nominal Voltage 1.50 Volts

EPP no

XMP yes

XMP revision 1.3

AMP no

JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency

JEDEC #1 6.0-6-6-17-22 @ 457 MHz

JEDEC #2 7.0-7-7-20-26 @ 533 MHz

JEDEC #3 9.0-9-9-24-33 @ 666 MHz

XMP profile XMP-2400

Specification PC3-19200

Voltage level 1.650 Volts

Min Cycle time 0.833 ns (1200 MHz)

Max CL 10.0

Min tRP 9.96 ns

Min tRCD 9.96 ns

Min tWR 13.25 ns

Min tRAS 25.75 ns

Min tRC 35.75 ns

Min tRFC 260.63 ns

Min tRTP 8.25 ns

Min tRRD 5.75 ns

Command Rate 1T

XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)

XMP #1 6.0-8-8-19-27-1T @ 728 MHz (1.650 Volts)

XMP #2 10.0-12-12-31-43-1T @ 1200 MHz (1.650 Volts)

]]> Tue, 01 Nov 2016 01:50:50 +0000 https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18346&title=fm2a88xitx#18346 <![CDATA[FM2A88X-ITX+ : Grab CPU-z and post screenies...]]> https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18341&title=fm2a88xitx#18341 Author: wardog
Subject: 3692
Posted: 01 Nov 2016 at 12:23am

Grab CPU-z and post screenies of both the Memory and SPD tabs.
]]> Tue, 01 Nov 2016 00:23:10 +0000 https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18341&title=fm2a88xitx#18341 <![CDATA[FM2A88X-ITX+ : There is no change... ]]> https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18326&title=fm2a88xitx#18326 Author: chezmemo
Subject: 3692
Posted: 31 Oct 2016 at 6:10pm

There is no change...]]> Mon, 31 Oct 2016 18:10:47 +0000 https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18326&title=fm2a88xitx#18326 <![CDATA[FM2A88X-ITX+ : Memory SPD--------------------...]]> https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18317&title=fm2a88xitx#18317 Author: chezmemo
Subject: 3692
Posted: 31 Oct 2016 at 3:29pm

Memory SPD

-------------------------------------------------------------------------

DIMM # 1

SMBus address 0x51

Memory type DDR3

Module format UDIMM

Manufacturer (ID) Corsair (7F7F9E00000000000000)

Size 8192 MBytes

Max bandwidth PC3-10700 (667 MHz)

Part number CMD16GX3M2A2400C10

Number of banks 8

Nominal Voltage 1.50 Volts

EPP no

XMP yes

XMP revision 1.3

AMP no

JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency

JEDEC #1 6.0-6-6-17-22 @ 457 MHz

JEDEC #2 7.0-7-7-20-26 @ 533 MHz

JEDEC #3 9.0-9-9-24-33 @ 666 MHz

XMP profile XMP-2400

Specification PC3-19200

Voltage level 1.650 Volts

Min Cycle time 0.833 ns (1200 MHz)

Max CL 10.0

Min tRP 9.96 ns

Min tRCD 9.96 ns

Min tWR 13.25 ns

Min tRAS 25.75 ns

Min tRC 35.75 ns

Min tRFC 260.63 ns

Min tRTP 8.25 ns

Min tRRD 5.75 ns

Command Rate 1T

XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)

XMP #1 6.0-8-8-19-27-1T @ 728 MHz (1.650 Volts)

XMP #2 10.0-12-12-31-43-1T @ 1200 MHz (1.650 Volts)

]]> Mon, 31 Oct 2016 15:29:14 +0000 https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18317&title=fm2a88xitx#18317 <![CDATA[FM2A88X-ITX+ : BIOS > OC Tweaker > DRAM...]]> https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18306&title=fm2a88xitx#18306 Author: wardog
Subject: 3692
Posted: 31 Oct 2016 at 12:08pm

BIOS > OC Tweaker > DRAM Timing Configuration > DRAM Frequency - change from Auto and IIRC you'll the see the XMP setting. Select XMP Profile 1, click the Exit tab, Save and Reboot.

That should set the sticks to 2400.

If it doesn't boot after doing the above, post back and I'll direct you to pushing a smidge more voltage into the memory controller
]]> Mon, 31 Oct 2016 12:08:05 +0000 https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18306&title=fm2a88xitx#18306 <![CDATA[FM2A88X-ITX+ : Memory SPD--------------------...]]> https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18293&title=fm2a88xitx#18293 Author: chezmemo
Subject: 3692
Posted: 31 Oct 2016 at 7:19am

Memory SPD

-------------------------------------------------------------------------

DIMM # 1

SMBus address 0x51

Memory type DDR3

Module format UDIMM

Manufacturer (ID) Corsair (7F7F9E00000000000000)

Size 8192 MBytes

Max bandwidth PC3-10700 (667 MHz)?

Part number CMD16GX3M2A2400C10

Number of banks 8

Nominal Voltage 1.50 Volts

EPP no

XMP yes

XMP revision 1.3

AMP no

JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency

JEDEC #1 6.0-6-6-17-22 @ 457 MHz

JEDEC #2 7.0-7-7-20-26 @ 533 MHz

JEDEC #3 9.0-9-9-24-33 @ 666 MHz

XMP profile XMP-2400

Specification PC3-19200

Voltage level 1.650 Volts

Min Cycle time 0.833 ns (1200 MHz)

Max CL 10.0

Min tRP 9.96 ns

Min tRCD 9.96 ns

Min tWR 13.25 ns

Min tRAS 25.75 ns

Min tRC 35.75 ns

Min tRFC 260.63 ns

Min tRTP 8.25 ns

Min tRRD 5.75 ns

Command Rate 1T

XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)

XMP #1 6.0-8-8-19-27-1T @ 728 MHz (1.650 Volts)

XMP #2 10.0-12-12-31-43-1T @ 1200 MHz (1.650 Volts)

It's OK ? or bad ? i'm don't inderstand

]]> Mon, 31 Oct 2016 07:19:07 +0000 https://forum.asrock.com/forum_posts.asp?TID=3692&PID=18293&title=fm2a88xitx#18293