ASRock Forums : Wake on LAN, X670E Steel Legend

Wake on LAN, X670E Steel Legend : Did you figure this out. Currently...

Mon, 20 Jan 2025 10:25:40 +0000

Author: dcuellar44
Subject: 38569
Posted: 20 Jan 2025 at 10:25am

Did you figure this out. Currently having the same issue. I know this is 7months old but I feel like I've tried everything. I'm not really sure what blacklisting is or how to do it.

Wake on LAN, X670E Steel Legend : M440, thank you very much for...

Wed, 15 May 2024 16:33:42 +0000

Author: bentwarp
Subject: 38569
Posted: 15 May 2024 at 4:33pm

M440, thank you very much for your help. Will try it today and report back.

Wake on LAN, X670E Steel Legend : the LED is always off in sleep/suspend...

Tue, 14 May 2024 22:32:00 +0000

Author: M440
Subject: 38569
Posted: 14 May 2024 at 10:32pm

the LED is always off in sleep/suspend for RTL8125

also: https://wiki.archlinux.org/title/Network_configuration/Ethernet#Realtek_no_link_/_WOL_problem

So basically you might want to blacklist module r8169 and load r8168. You might want to set an option for the module.


> cat /etc/modprobe.d/blacklist_r8169.conf

blacklist r8169
#option r8168 s5wol=1

> cat /etc/modules-load.d/r8168.conf
r8168

Edited by M440 - 14 May 2024 at 10:45pm

Wake on LAN, X670E Steel Legend : You might need to set something...

Tue, 14 May 2024 00:57:48 +0000

Author: M440
Subject: 38569
Posted: 14 May 2024 at 12:57am

You might need to set something specific for your network card.

For the RTL8125 network card i had to install one package. There is something about RTL8111 too. (5.4 Realtek section)

https://wiki.archlinux.org/title/Wake-on-LAN#Realtek

Edited by M440 - 14 May 2024 at 9:12pm

Wake on LAN, X670E Steel Legend : I am having issues enabling WOL...

Mon, 13 May 2024 12:35:58 +0000

Author: bentwarp
Subject: 38569
Posted: 13 May 2024 at 12:35pm

I am having issues enabling WOL on my motherboard on Linux.

- BIOS 2.10
- I am using Gigabit LAN 10/100/1000 Mb/s (Realtek RTL8111)
- I have enabled PCI Devices Power
- I have disabled Deep Sleep
- I have enabled wol and magic packet on my network interface


> sudo ethtool enp7s0
Settings for enp7s0:
        Supported ports: [ TP    MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Supported FEC modes: Not reported
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised pause frame use: Symmetric Receive-only
        Advertised auto-negotiation: Yes
        Advertised FEC modes: Not reported
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                             100baseT/Half 100baseT/Full
                                             1000baseT/Full
        Link partner advertised pause frame use: No
        Link partner advertised auto-negotiation: Yes
        Link partner advertised FEC modes: Not reported
        Speed: 1000Mb/s
        Duplex: Full
        Auto-negotiation: on
        master-slave cfg: preferred slave
        master-slave status: slave
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: external
        MDI-X: Unknown
        Supports Wake-on: pumbg
        Wake-on: g
        Link detected: yes

- I have tried multiple tools to try to send MagicPacket (g) to mac address but nothing happens
- After sleep/suspend, the network link connection LED on ethernet port is NOT blinking

Can someone maybe help me out, I dont know what else I could do.