ASRock Forums : Workstation build X99 Extreme 11 boot problems https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Sat, 04 Apr 2026 04:42:56 +0000 Fri, 03 Mar 2017 05:11:26 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=4026 <![CDATA[ASRock Forums]]> https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ <![CDATA[Workstation build X99 Extreme 11 boot problems : We&#039;re seeing more and more...]]> https://forum.asrock.com/forum_posts.asp?TID=4026&PID=24351&title=workstation-build-x99-extreme-11-boot-problems#24351 Author: wardog
Subject: 4026
Posted: 03 Mar 2017 at 5:11am

We're seeing more and more of slow times when XMP is enabled/employed.

If you have set your memory using XMP, try setting it(them) manually and post back.
]]> Fri, 03 Mar 2017 05:11:26 +0000 https://forum.asrock.com/forum_posts.asp?TID=4026&PID=24351&title=workstation-build-x99-extreme-11-boot-problems#24351 <![CDATA[Workstation build X99 Extreme 11 boot problems : Hi.Can u gays help me.I have new...]]> https://forum.asrock.com/forum_posts.asp?TID=4026&PID=24327&title=workstation-build-x99-extreme-11-boot-problems#24327 Author: ali
Subject: 4026
Posted: 02 Mar 2017 at 11:32pm

Hi.
Can u gays help me.
I have new pc and it take too long to booting. 1min and more
MB X99 extreme 4
ssd intenso sata III 512gb
Cpu xeon e5-2683 v3
]]> Thu, 02 Mar 2017 23:32:32 +0000 https://forum.asrock.com/forum_posts.asp?TID=4026&PID=24327&title=workstation-build-x99-extreme-11-boot-problems#24327 <![CDATA[Workstation build X99 Extreme 11 boot problems : Hi,i have the same kind of problem...]]> https://forum.asrock.com/forum_posts.asp?TID=4026&PID=24316&title=workstation-build-x99-extreme-11-boot-problems#24316 Author: xnd
Subject: 4026
Posted: 02 Mar 2017 at 8:05pm

Hi,i have the same kind of problem over here with x99 extreme 11 and i7 6850k,win 8.1.
Maybe even worse,it only boots if leave it without power for a while(cable unplugged).But i get uncorectable error after 10 min most.

]]> Thu, 02 Mar 2017 20:05:02 +0000 https://forum.asrock.com/forum_posts.asp?TID=4026&PID=24316&title=workstation-build-x99-extreme-11-boot-problems#24316 <![CDATA[Workstation build X99 Extreme 11 boot problems : Hello The_DutchmanI have the same...]]> https://forum.asrock.com/forum_posts.asp?TID=4026&PID=22684&title=workstation-build-x99-extreme-11-boot-problems#22684 Author: phrenesis
Subject: 4026
Posted: 28 Jan 2017 at 6:13am

Hello The_Dutchman

I have the same problems, but additional to that I also get WHEA errors, and everytime I try to update gpu drivers (or windows update) it crashes.

Asus Strix 8-Gaming 1080
i7-6850k
4x 8GB HyperX Fury 2666MHZ
750W Corsair PSU

I tried the 3.00 Bios and the 3.20 Bios, same errors.
50/50 Chance it will boot, Error 92-99
Once in Windows it shows WHEA Errors on the PCI Express Root Port

]]> Sat, 28 Jan 2017 06:13:53 +0000 https://forum.asrock.com/forum_posts.asp?TID=4026&PID=22684&title=workstation-build-x99-extreme-11-boot-problems#22684 <![CDATA[Workstation build X99 Extreme 11 boot problems : Hello Wardog &amp; Parsec,Both...]]> https://forum.asrock.com/forum_posts.asp?TID=4026&PID=20962&title=workstation-build-x99-extreme-11-boot-problems#20962 Author: The_Dutchman
Subject: 4026
Posted: 20 Dec 2016 at 6:52am

Hello Wardog & Parsec,

Both systems experience the exact same problems. So I thought the motherboard was troublesome so I already sent 1 motherboard back to the supplier which in it's turn send it back for checks and service.

When the system gets through the POST, Windows runs without any problems in graphics/RAM/stability so I do not suspect any other components any more. Also tested with some benchmark tools to really test stability & RAM. It's only inconsistent in booting. I must say that I did not see the slowing down in the BIOS yet for this motherboard. I boot it into the BIOS settings menus and then issue a CTRL+ALT+DELETE (is this OK?) to restart it and try to get in the BIOS again. Once every 5, 9 or 30 times this will fail with PCI-E codes in the 90 region, mostly 92.

@Parsec, I only had BIOS version 3.0 which I upgraded to 3.2, that's all. I tried to set your BIOS settings, however I was surprised that for the PCIE1.2.3.4 and 5 Link Speed there was only Gen1 & Gen2 available. Shouldn't there also be a Gen3 as like you state? I've also used the other settings, I will continue with some tests. X99 Posts are long, so if you have to do 30 before a failure, it takes a while!



 
]]> Tue, 20 Dec 2016 06:52:40 +0000 https://forum.asrock.com/forum_posts.asp?TID=4026&PID=20962&title=workstation-build-x99-extreme-11-boot-problems#20962 <![CDATA[Workstation build X99 Extreme 11 boot problems : The_Dutchman wrote:Dear Sir/Madam,I...]]> https://forum.asrock.com/forum_posts.asp?TID=4026&PID=20753&title=workstation-build-x99-extreme-11-boot-problems#20753 Author: parsec
Subject: 4026
Posted: 16 Dec 2016 at 12:06am

Originally posted by The_Dutchman The_Dutchman wrote:

Dear Sir/Madam,

I have a stability problem with a brand new workstation build, for simplicity I list here my hardware with all drives & PCI devices removed, so I only have left on the board:

- Intel Xeon E5-2687WV4 12 core 30MB cache
- Corsair Dominator DDR4 RAM 4*x16GB in the black slots (also tried already with just one stick) CMD64GX4M4B2800C14 not even overclocked, just running at 2133MHz for now.
- NZXT Kraken X61 watercooler
- PNY Quadro M4000
- Corsair HX1200i

The problem is that I can't get to the BIOS everytime I try. I even tried without a graphics card installed and I still get fault codes in the 92 region. All related to PCI-E operation. Sometimes I will get into the bios successfully for 19 times until the fault code appears, sometimes just 8 times, and sometimes I get the fault code immediately.

I already updated to the latest 3.2 bios version. There are 2 PCI-E molex connectors which the manual says should be connected when 3 or more graphics cards are used, so I didn't bother to connect these as this would clutter the setup more with cables. And I only use 1 grahpics card.

I also experienced that when I got in the bios, after a minute or sow the bios starts to get very slow drawing on the screen, I can see the redrawing of a horizontal line going down. It is definitely not RAM, CPU or graphics card, as I have this build twice and already swapped all these components and the problem still persists. Problem appears in both setups.

Any idea what this issue might be? A bios firmware issue?







An intermittent problem like you are having is the most difficult to diagnose.  Pinch

When you do have the POST failure problem, is there anything at all that seems to be consistent when it happen? Such as, it happens when you restart the PC from Windows? Or does it happen on a cold start, from a shutdown state of the PC?

Do you use the Restart to UEFI program that ASRock provides?

The UEFI/BIOS display slowing down is very unusual, have you experienced that with every UEFI/BIOS version? Do you recall about how many different UEFI/BIOS versions you've used with your boards?

I know you don't think your memory is involved in this issue, but memory problems can cause PCIe issues. I'm suspicious about the PCIe POST code shown when no video card is in the board. 64GB of memory may need a bit more DRAM voltage. You could also try setting MRC Fast Boot to Disabled, and Memory Test to Enabled. That will slow down POST, which is already slow on any X99 system, but worth trying.

The following UEFI/BIOS options are found in the Chipset Configuration screen in the UEFI/BIOS. You may or may not have set these from their defaults, and I cannot say configuring them will fix your issues, but they are worth trying:

Above 4G Decoding: Set to Enabled.

PCIE1.2.3.4 and 5 Link Speed: Whichever PCIe slot you use for your video card, set it to Gen3.

PCI-E ASPM Support: Disabled by default, if you have it enabled, try Disabled.

Moving on, do you use the Fast Boot option, in the Boot screen? This option is really Fast POST, and causes an abrupt POST process, that can cause side effects. Try disabling it if you have it set otherwise.

Have you used other video cards with these boards, and still experience the same issues?

I see there is a very new driver update for your video card from Nvidia, not that it should make a difference in the pre-OS environment:

http://www.nvidia.com/download/driverResults.aspx/113024/en-us








]]> Fri, 16 Dec 2016 00:06:34 +0000 https://forum.asrock.com/forum_posts.asp?TID=4026&PID=20753&title=workstation-build-x99-extreme-11-boot-problems#20753 <![CDATA[Workstation build X99 Extreme 11 boot problems : The_Dutchman wrote:I even tried...]]> https://forum.asrock.com/forum_posts.asp?TID=4026&PID=20751&title=workstation-build-x99-extreme-11-boot-problems#20751 Author: wardog
Subject: 4026
Posted: 15 Dec 2016 at 11:46pm

Originally posted by The_Dutchman The_Dutchman wrote:

I even tried without a graphics card installed and I still get fault codes in the 92 region.


Waking and rereading sometimes leads to a fresh  perspective ............




Turning a corner now knowing two have two systems  ............

This problem machine, do you have another GPU you can temp like put on this machine to test if the M4000 is causing issues?



]]> Thu, 15 Dec 2016 23:46:11 +0000 https://forum.asrock.com/forum_posts.asp?TID=4026&PID=20751&title=workstation-build-x99-extreme-11-boot-problems#20751 <![CDATA[Workstation build X99 Extreme 11 boot problems : The_Dutchman wrote:On 1 system...]]> https://forum.asrock.com/forum_posts.asp?TID=4026&PID=20750&title=workstation-build-x99-extreme-11-boot-problems#20750 Author: wardog
Subject: 4026
Posted: 15 Dec 2016 at 11:40pm

Originally posted by The_Dutchman The_Dutchman wrote:

On 1 system I got it fully installed and running Windows 10, in fact I'm typing this post on it right now.


So ..... You've built two identical systems and only one exhibits this?
]]> Thu, 15 Dec 2016 23:40:31 +0000 https://forum.asrock.com/forum_posts.asp?TID=4026&PID=20750&title=workstation-build-x99-extreme-11-boot-problems#20750 <![CDATA[Workstation build X99 Extreme 11 boot problems : The_Dutchman wrote:Just for...]]> https://forum.asrock.com/forum_posts.asp?TID=4026&PID=20729&title=workstation-build-x99-extreme-11-boot-problems#20729 Author: wardog
Subject: 4026
Posted: 15 Dec 2016 at 1:44pm

Originally posted by The_Dutchman The_Dutchman wrote:

Just for show of, I installed this on a 1TB RD400 M.2 SSD with a 4 2TB disks as 4TB RAID10 backup.


Stop! You really know know to hurt a guy, don't you.

Wish I too were still single LOL



Ok. The pics and you state it runs fine at 2133. 64GB @ 2133, not 64GB @ 2800.



Let me get parsec, another Moderator, in here that has an X99 board to offer up his expertise on X99's.



In the mean time, plug both the boards PCIE_PWRx 4-pin molex's from the PSU and test if this is repeatable. I can't find doc's on your M4000 of where and how much power it draws from the PCIe bus.

No harm will come from doing so. The two only provide supplemental power should it be needed.




]]> Thu, 15 Dec 2016 13:44:32 +0000 https://forum.asrock.com/forum_posts.asp?TID=4026&PID=20729&title=workstation-build-x99-extreme-11-boot-problems#20729 <![CDATA[Workstation build X99 Extreme 11 boot problems : The_Dutchman wrote:DRAM Frequency...]]> https://forum.asrock.com/forum_posts.asp?TID=4026&PID=20704&title=workstation-build-x99-extreme-11-boot-problems#20704 Author: Xaltar
Subject: 4026
Posted: 15 Dec 2016 at 3:19am

Originally posted by The_Dutchman The_Dutchman wrote:


DRAM Frequency x2 = RAM speed (DDR=Double Data Rate) 

So in this case 1066.5 x 2 = 2133 
]]> Thu, 15 Dec 2016 03:19:19 +0000 https://forum.asrock.com/forum_posts.asp?TID=4026&PID=20704&title=workstation-build-x99-extreme-11-boot-problems#20704