https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Fri, 01 May 2026 01:49:02 +0000 Thu, 19 Jan 2017 05:20:22 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=4054 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=4054&PID=22303&title=x58-supercomputer-issue#22303 Author: Dynamizer
Subject: 4054
Posted: 19 Jan 2017 at 5:20am

Hi.
I've managed to get a different PCIe 2.0 video card, it's a Geforce GT630, that have the same power saving features as my GTX 560.
I tried it on the X58 Supercomputer and it does the same behaviour: after s3 sleep wake up, it doesn't go to PCIe 2.0 anymore and get stuck at 1.1.
So it's a motherboard (or chipset) fault.
Any ideas?
Is there any other X58 chipset user that can check this behaviour please?
Thanks.
]]> Thu, 19 Jan 2017 05:20:22 +0000 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=22303&title=x58-supercomputer-issue#22303 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21861&title=x58-supercomputer-issue#21861 Author: Dynamizer
Subject: 4054
Posted: 08 Jan 2017 at 7:22pm

Last check on troubleshooting: I tried to install my gtx 560 GPU on an Asrock B75 Pro3 and there it works flawlessly after the wake up, going to PCIe 2.0.
I'm now officially confused...
It seems that the Old X58 Supercomputer won't send the correct wake up signal to the GPU? Can't know it yet...
I need another PCIe 2.0 gpu with energy saving features like mine and do some other trials, but I don't have any more :(


Edited by Dynamizer - 11 Jan 2017 at 11:48am]]> Sun, 08 Jan 2017 19:22:11 +0000 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21861&title=x58-supercomputer-issue#21861 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21859&title=x58-supercomputer-issue#21859 Author: Dynamizer
Subject: 4054
Posted: 08 Jan 2017 at 3:38pm

Hello. Sorry for being late at answering, in the meantime I was busy, but still had some spare time to do some troubleshooting.

wardog wrote: Your PSU is old.

It could be true, but I was answering about it being "a bit small".

parsec wrote: I can only go by your board's manual, since I don't have your board. If the BIOS options were changed, and the manual was not updated to reflect those changes, I'm stuck.

The settings got changed in the names inside the menu but I guess the features they control are the same. Now Repost Video on STR Resume is called Check Ready Bit, and it still be can set to Enabled or Disabled.
Anyway I got some screenshot that I try to attach later (from my smartphone).

parsec wrote: But please check this in your BIOS settings, from your board's manual, in the ACPI Configuration section: Suspend to RAM Use this item to select whether to auto-detect or disable the Suspend-to-RAM feature. Select [Auto] will enable this feature if the OS supports it. If you set this item to [Disabled], the function ?�Repost Video on STR Resume??will be hidden. Suspend to RAM (STR) is S3 Sleep, exactly what you are having trouble with. Suspend to RAM must be set to Auto if you want to use Windows Sleep. Note the Repost Video on STR Resume option will not be shown if Suspend to RAM is disabled. We have no idea what Suspend to RAM is set to now, so this may be the reason why you don't have the Repost Video on STR Resume option shown.

Yes, actually Suspend to RAM is set to Auto.
If I set it to Disabled, Check Ready Bit is not shown.

parsec wrote: The Windows Event log is certainly not only about software related events. You'll find the majority of its entries are related to hardware. What to look for in the Event Log? To make that easier, enter Sleep mode in Windows, and then try to wake from Sleep. If it fails, restart the PC and open the Event Log. Among the most recent entries, there should be one or more about the failure to wake from Sleep. You could then use the error code or number of that entry to find the others, which might provide some other clues about the problem. Event Log entries are date and time stamped. That means you can find the entries that were written close to the time of a failed wake from Sleep event. Once you find one log entry related to the wake from Sleep failure, others won't be hard to find.

Actually I tried to check something in the Event Log, but I couldn't find anything. Besides, the computer never fails to wake up.

Anyway I guess the problem is not about the motherboard.
As I stated above, I did some troubleshooting.
I tried to switch my Geforce GTX 560 with a Radeon HD4650. They both are PCIe 2.0 GPUs but the first one have some kind of energy saving features, while the second not.
When in idle, the Geforce would low its internal frequencies and sets itself to PCIe 1.1, and boost up to full frequencies and PCIe 2.0 when power is needed, while the Radeon not, it remains full speed and PCIe 2.0.
I did try to put in sleep (STR) the computer and then wake it up with the Radeon and it remains at PCIe 2.0, so I guess that all this fuss is due to the Geforce not behaving well to STR resume.
Now I'm going to the producers (MSI) support site and/or forum and try to ask some help, like a new firmware to flash that solves the bug.
Thank you anyway for the time you spent for me!

wardog wrote: Moved from Media Reviews > Intel Motherboards _to_ Tech Support > Intel Motherboards

Sorry! I was sure to have already posted under tech support.
]]> Sun, 08 Jan 2017 15:38:34 +0000 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21859&title=x58-supercomputer-issue#21859 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21353&title=x58-supercomputer-issue#21353 Author: wardog
Subject: 4054
Posted: 28 Dec 2016 at 7:41am

Moved from Media Reviews > Intel Motherboards _to_ Tech Support > Intel Motherboards]]> Wed, 28 Dec 2016 07:41:31 +0000 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21353&title=x58-supercomputer-issue#21353 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21341&title=x58-supercomputer-issue#21341 Author: parsec
Subject: 4054
Posted: 28 Dec 2016 at 1:35am

I can only go by your board's manual, since I don't have your board. If the BIOS options were changed, and the manual was not updated to reflect those changes, I'm stuck.

But please check this in your BIOS settings, from your board's manual, in the ACPI Configuration section:

Suspend to RAM

Use this item to select whether to auto-detect or disable the Suspend-to-RAM
feature. Select [Auto] will enable this feature if the OS supports it. If you set
this item to [Disabled], the function ?œRepost Video on STR Resume??will be
hidden.

Suspend to RAM (STR) is S3 Sleep, exactly what you are having trouble with. Suspend to RAM must be set to Auto if you want to use Windows Sleep. Note the Repost Video on STR Resume option will not be shown if Suspend to RAM is disabled.

We have no idea what Suspend to RAM is set to now, so this may be the reason why you don't have the Repost Video on STR Resume option shown.

The Windows Event log is certainly not only about software related events. You'll find the majority of its entries are related to hardware.

What to look for in the Event Log? To make that easier, enter Sleep mode in Windows, and then try to wake from Sleep. If it fails, restart the PC and open the Event Log. Among the most recent entries, there should be one or more about the failure to wake from Sleep. You could then use the error code or number of that entry to find the others, which might provide some other clues about the problem.

Event Log entries are date and time stamped. That means you can find the entries that were written close to the time of a failed wake from Sleep event. Once you find one log entry related to the wake from Sleep failure, others won't be hard to find.
]]> Wed, 28 Dec 2016 01:35:53 +0000 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21341&title=x58-supercomputer-issue#21341 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21300&title=x58-supercomputer-issue#21300 Author: wardog
Subject: 4054
Posted: 27 Dec 2016 at 6:47am

Dynamizer wrote: Hello. I have this nice motherboard and I use it everyday since years without no big problems.

Dynamizer wrote: parsec wrote: [quote]Your PSU may be a bit small for an X58 system, and a 560 video card. Or it may be getting old. That's quite unlikely: I've used to stress my system with some benchmark and it doesn't even seem to notice it (except some little fan speeding).

Your PSU is old.
]]> Tue, 27 Dec 2016 06:47:04 +0000 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21300&title=x58-supercomputer-issue#21300 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21295&title=x58-supercomputer-issue#21295 Author: Dynamizer
Subject: 4054
Posted: 27 Dec 2016 at 4:00am

parsec wrote: Wake from Sleep issues can be very difficult to fix, or impossible in some cases. I had a P67 chipset board that would not allow the video card to start when waking from S3 Sleep. I would get a message in the Windows 7 Event Log about the video "driver" not responding within the expected time. You should check the Windows Event log for possible clues about your issue.

Where should I look into? Even tho I guess that I wouldn't find anything, I think the issue is hardware related and not software related.

What BIOS version are you using now?

Latest, 3.40

In the BIOS, ACPI Configuration screen, there is an option called Repost Video on STR Resume, which is set to No by default. STR is Suspend To RAM, which is S3 Sleep. Try setting it to On for the PCIe speed issue.

There's no such option in my bios config.

X58 boards use the dual chipset design. The SATA controller is in the ICH10R chip in your board. What is the SATA mode (Configure SATA As) set to in the BIOS? Since you seem to lose connection to the WD 2TB drive intermittently, check the cable connections and replace the SATA data cable.

The controller is set as AHCI and there's no cable or plugs problem, I double checked and even tried every port on the board and changed some spare cables. All to no avail.

In the BIOS, Chipset Configuration screen, there are several voltage options related to the X58 and ICH10R chipsets. Such as the ICH Voltage option (for the ICH10R) and the IOH/ICH PCIE Voltage option (related to both chips.) Try increasing these by 0.1V or more to see if that helps.

Ok I'll give it a shot.

Do you have the Intelligent Energy Saver option in Chipset Configuration enabled? If so, try disabling it.

I'll check it out this too.

Your PSU may be a bit small for an X58 system, and a 560 video card. Or it may be getting old.

That's quite unlikely: I've used to stress my system with some benchmark and it doesn't even seem to notice it (except some little fan speeding).

Thank you for now.
]]> Tue, 27 Dec 2016 04:00:08 +0000 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21295&title=x58-supercomputer-issue#21295 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21018&title=x58-supercomputer-issue#21018 Author: parsec
Subject: 4054
Posted: 21 Dec 2016 at 12:49am

Dynamizer wrote: Hello. I have this nice motherboard and I use it everyday since years without no big problems. I noticed a weird behavior tho. When I put the system to sleep (S.T.R., or S3 suspend), when I wake it back up, the PCI-e bus won't go to 2.0 when needed but get stuck to 1.1, also it loses sometimes the connection of one of my hdd, always the same, a WD 2Tb. I found out about it with GPU-Z, using the stress test integrated. Also rebooting won't fix the issue and I must shut down or get it to hybernate (that's like shutting down) to get the PCI-e to go to 2.0 when needed. I normally use Windows Vista sp2 32 bit, but I also tried Windows 10 64 bit: same issue occurs. Configuration of the sys: i7 920 @ default kit of 3 x 2gb Team Group Tri-Elite 1333 ddr3 (total 6gb) GPU Geforce GTX 560 1 GB pci-e 2.0 @ default 3 x hdd: 250 Gb, 2 Tb, 1 Tb. PSU Cooler Master 650W RP-650-PCAP Does it happen to other X58 motherboards, so to be a chipset bug, or only to the X58 supercomputer mobo, or just to me? Or does anyone know how to fix it? Thanks in advance.

Wake from Sleep issues can be very difficult to fix, or impossible in some cases. I had a P67 chipset board that would not allow the video card to start when waking from S3 Sleep. I would get a message in the Windows 7 Event Log about the video "driver" not responding within the expected time. You should check the Windows Event log for possible clues about your issue.

What BIOS version are you using now?

In the BIOS, ACPI Configuration screen, there is an option called Repost Video on STR Resume, which is set to No by default. STR is Suspend To RAM, which is S3 Sleep. Try setting it to On for the PCIe speed issue.

X58 boards use the dual chipset design. The SATA controller is in the ICH10R chip in your board. What is the SATA mode (Configure SATA As) set to in the BIOS? Since you seem to lose connection to the WD 2TB drive intermittently, check the cable connections and replace the SATA data cable.

In the BIOS, Chipset Configuration screen, there are several voltage options related to the X58 and ICH10R chipsets. Such as the ICH Voltage option (for the ICH10R) and the IOH/ICH PCIE Voltage option (related to both chips.) Try increasing these by 0.1V or more to see if that helps.

Do you have the Intelligent Energy Saver option in Chipset Configuration enabled? If so, try disabling it.

Your PSU may be a bit small for an X58 system, and a 560 video card. Or it may be getting old.


]]> Wed, 21 Dec 2016 00:49:04 +0000 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=21018&title=x58-supercomputer-issue#21018 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=20911&title=x58-supercomputer-issue#20911 Author: Dynamizer
Subject: 4054
Posted: 19 Dec 2016 at 2:12am

Hello.
I have this nice motherboard and I use it everyday since years without no big problems.
I noticed a weird behavior tho.
When I put the system to sleep (S.T.R., or S3 suspend), when I wake it back up, the PCI-e bus won't go to 2.0 when needed but get stuck to 1.1, also it loses sometimes the connection of one of my hdd, always the same, a WD 2Tb.
I found out about it with GPU-Z, using the stress test integrated.
Also rebooting won't fix the issue and I must shut down or get it to hybernate (that's like shutting down) to get the PCI-e to go to 2.0 when needed.
I normally use Windows Vista sp2 32 bit, but I also tried Windows 10 64 bit: same issue occurs.
Configuration of the sys:
i7 920 @ default
kit of 3 x 2gb Team Group Tri-Elite 1333 ddr3 (total 6gb)
GPU Geforce GTX 560 1 GB pci-e 2.0 @ default
3 x hdd: 250 Gb, 2 Tb, 1 Tb.
PSU Cooler Master 650W RP-650-PCAP

Does it happen to other X58 motherboards, so to be a chipset bug, or only to the X58 supercomputer mobo, or just to me?
Or does anyone know how to fix it?
Thanks in advance.
]]> Mon, 19 Dec 2016 02:12:45 +0000 https://forum.asrock.com/forum_posts.asp?TID=4054&PID=20911&title=x58-supercomputer-issue#20911