https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Mon, 13 Apr 2026 12:52:41 +0000 Mon, 10 Jun 2024 22:27:50 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=42409 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=42409&PID=125178&title=romed82t-doesnt-boot-anymore#125178 Author: Xaltar
Subject: 42409
Posted: 10 Jun 2024 at 10:27pm

This may be of help:
https://forum.asrock.com/forum_posts.asp?TID=11132]]> Mon, 10 Jun 2024 22:27:50 +0000 https://forum.asrock.com/forum_posts.asp?TID=42409&PID=125178&title=romed82t-doesnt-boot-anymore#125178 https://forum.asrock.com/forum_posts.asp?TID=42409&PID=125177&title=romed82t-doesnt-boot-anymore#125177 Author: Charting5637
Subject: 42409
Posted: 10 Jun 2024 at 9:00pm

Charting5637 wrote: Hi, I own a ROMED8-2T motherboard and since a recent reboot of the machine, it won't boot nor show any video signal on an external monitor. The IPMI ethernet port flashes but doesn't get a DHCP address. The BIOS screen shows b2 code. Here's what I did to troubleshoot the problem : 1. Stripped down the computer to the basic (CPU + RAM only, nothing else) 2. Alternated the position of the RAM 3. Reinstalled the CPU in case there was an alignment problem 4. Tested with only one RAM stick Still got b2 code. Then : 1. Temporarly bringed back everything together 2. Removed CMOS battery + shorted CMOS 3. Started back on the computer Now, the BIOS screen shows a 90 sec countdown and end up with a b2 code. Here's a video of the BIOS screen in case it shows useful informations : https://we.tl/t-oQ0BDmrziS Finally, here's the whole setup : Motherboard Model Name : ROMED8-2T CPU/Processor (Brand,Speed, FSB,Cache Size) AMD Epyc 7302P, 3.0GHz, 128 MB Memory (Speed, Capacity, Brand) DDR4 3200 (PC4 25600), ECC Registered, 64 GB, Micron Video Card (Brand, Model, Memory size) MSI, Radeon RX Vega 56 xAir Boost, 8G Operating System (Loaded service pack and driver) TrueNAS Scale v23 Hard Drive (Brand, Model, Capacity) Seagate IronWolf, ST16000NTA0, 16TB Other Device (Brand, Model) 2x NMVe SAMSUNG 980 PRO SSD 500GB 2x NVMe SAMSUNG 980 PRO SSD 1TB on 2x NVMe to PCIe 4.0 X4 Adapter Gigabit Ethernet (Intel I210-T1) With these infos and your valued knowledge, is there anything that can be done to fix this issue? Thanks in advance and regards!

The PSU is a SeaSonic PRIME 1300W 80+ Gold, 5 months old, purchased new]]> Mon, 10 Jun 2024 21:00:20 +0000 https://forum.asrock.com/forum_posts.asp?TID=42409&PID=125177&title=romed82t-doesnt-boot-anymore#125177 https://forum.asrock.com/forum_posts.asp?TID=42409&PID=125083&title=romed82t-doesnt-boot-anymore#125083 Author: Charting5637
Subject: 42409
Posted: 10 Jun 2024 at 7:03am

Hi,

I own a ROMED8-2T motherboard and since a recent reboot of the machine, it won't boot nor show any video signal on an external monitor. The IPMI ethernet port flashes but doesn't get a DHCP address. The BIOS screen shows b2 code.

Here's what I did to troubleshoot the problem :
1. Stripped down the computer to the basic (CPU + RAM only, nothing else)
2. Alternated the position of the RAM
3. Reinstalled the CPU in case there was an alignment problem
4. Tested with only one RAM stick

Still got b2 code. Then :
1. Temporarly bringed back everything together
2. Removed CMOS battery + shorted CMOS
3. Started back on the computer

Now, the BIOS screen shows a 90 sec countdown and end up with a b2 code. Here's a video of the BIOS screen in case it shows useful informations : https://we.tl/t-oQ0BDmrziS

Finally, here's the whole setup :

Motherboard Model Name :
ROMED8-2T
CPU/Processor (Brand,Speed, FSB,Cache Size)
AMD Epyc 7302P, 3.0GHz, 128 MB
Memory (Speed, Capacity, Brand)
DDR4 3200 (PC4 25600), ECC Registered, 64 GB, Micron
Video Card (Brand, Model, Memory size)
MSI, Radeon RX Vega 56 xAir Boost, 8G
Operating System (Loaded service pack and driver)
TrueNAS Scale v23
Hard Drive (Brand, Model, Capacity)
Seagate IronWolf, ST16000NTA0, 16TB
Other Device (Brand, Model)
2x NMVe SAMSUNG 980 PRO SSD 500GB
2x NVMe SAMSUNG 980 PRO SSD 1TB on 2x NVMe to PCIe 4.0 X4 Adapter
Gigabit Ethernet (Intel I210-T1)

With these infos and your valued knowledge, is there anything that can be done to fix this issue?

Thanks in advance and regards!]]> Mon, 10 Jun 2024 07:03:37 +0000 https://forum.asrock.com/forum_posts.asp?TID=42409&PID=125083&title=romed82t-doesnt-boot-anymore#125083