ASRock Forums : stable pc sometimes doesnt post.

stable pc sometimes doesnt post. : I have the issue in my Asus PC...

Sun, 21 Oct 2018 12:16:02 +0000

Author: nancywilson
Subject: 4300
Posted: 21 Oct 2018 at 12:16pm

I have the issue in my Asus PC that sometimes stuck during running. What should i do to resolve this issue? I also try on asus support for the help purpose but did not get any response.

stable pc sometimes doesnt post. : if u have issues with fsb at 225...

Mon, 12 Feb 2018 17:26:26 +0000

Author: kerberos_20
Subject: 4300
Posted: 12 Feb 2018 at 5:26pm

if u have issues with fsb at 225 then dont overclock fsb then? your mobo might not be up to it.
ive had 890fx chipset before (Gigabyte GA-890FXA-UD5) and it could go to 263fsb max
870 is not teh highend, its actually at the bottom of 800 series...hence mobo components are cheap

btw u cant lock pci-e frequency? my old 890fx could do that

stable pc sometimes doesnt post. : What is your processor? I have...

Fri, 27 Jan 2017 01:46:38 +0000

Author: Zirw
Subject: 4300
Posted: 27 Jan 2017 at 1:46am

What is your processor? I have a fx8350 even when picked up core voltage and North Bridge is similar does not take up 225. But for the multiplier to overclock if that unlike processor holds a 4.4 on the standard voltage! I think I still have some sort of problem with the motherboard bios after all the problems start when I try to overclock the busRemember that overclocking you overclock the bus and memory! Put the memory frequency below. Also see that the north bridge would not be higher than 2200, and HT 2200, 2400.

stable pc sometimes doesnt post. : anyhting above 225 fsb fails to...

Fri, 27 Jan 2017 01:38:00 +0000

Author: Tader
Subject: 4300
Posted: 27 Jan 2017 at 1:38am

anyhting above 225 fsb fails to boot for me , even with increased voltages , idk maybe this mobo dont like fsb overclocks

Edited by Tader - 27 Jan 2017 at 1:38am

stable pc sometimes doesnt post. : With any card from nvidia does...

Fri, 27 Jan 2017 01:19:39 +0000

Author: Zirw
Subject: 4300
Posted: 27 Jan 2017 at 1:19am

With any card from nvidia does not rise to 2.0. After turning off and turning on your PC falls to 1.1. I did not fall until the first shutdown. That is, if all is OK to restart, but if you turn off and then turn on, then pcie is defined as 1.1. Today I will take radeon r9 280x and try it. By the way I have above 225 bus fails to disperse!

stable pc sometimes doesnt post. : r9 380x g1 gaming, pcie using...

Fri, 27 Jan 2017 00:39:02 +0000

Author: Tader
Subject: 4300
Posted: 27 Jan 2017 at 12:39am

r9 380x g1 gaming, pcie using x16, gpuz shows x16 1.1, changes 2.0 then rendering

Edited by Tader - 27 Jan 2017 at 12:48am

stable pc sometimes doesnt post. : What is your video card? And if...

Fri, 27 Jan 2017 00:29:49 +0000

Author: Zirw
Subject: 4300
Posted: 27 Jan 2017 at 12:29am

What is your video card? And if pcie slipping to 1.1 after the bus overclocking?

stable pc sometimes doesnt post. : on cold boot , i have to restart...

Thu, 26 Jan 2017 22:57:07 +0000

Author: Tader
Subject: 4300
Posted: 26 Jan 2017 at 10:57pm

on cold boot , i have to restart motherboard 970g /3.1 bios 1.20, only then overclocked to 225 fsb , tried increase voltages but it doesnt help.