Brilliant work, I love all the details and the flow of the build. Great job tying everything in and making the build feel coherent with so many custom elements 

With all parts mounted and everything prepared, we finally could start to bend the tubes for the watercooling loop....

after that we filled the loop with blue coolant and started to mount the last details so that we could make some final pics before we have to ship everything to the Computex....

Thanks a lot Xaltar!!!

It´s time for the next Update:

But before we start....one of the most important Parts has arrived. So we want to send  out a big Thank you to Nvidia for their Help & Support on this Project!!!!

Beside that we finished the work on the reservoir overall the sanding & polishing process took around 4-5 days but we´re happy with the result....

....and we also prepared a flow indicator for the watercooling loop....not sure if we´re really going to use it....but it´s good to be prepared.....

You know you are getting it right when the details blend in to the theme seamlessly but also pop out at you when you notice them. Looking forward to seeing this complete!

Thank you for sharing 

As next we mounted Radiator & Fans inside the Case so that we could take a closer look how much space will be left between the radiator & the reservoir when everything is mounted in place, just to see if we will run into problems....

Beside that we sanded and painted the HDD / SSD Holders.....

And we also continued the work on the reservoir. First we glued the 2 inner layers together so that we could overwork the inside of the waterchannels in 1 step.

After the glue was dry, we directly took a few small needle files and a cordless drill so that we could overwork the inner edge.....after that we switched from needle files to sandpaper....so that we could add the next layers as soon as possible....

thank you!!!

Like mentioned in our last Update we continued the work on this project with the reservoir for the watercooling loop.....and like mentioned it will be a custom shaped reservoir in the shape of a half snowflake.

So as first step we cut out a Plexiglas Top and Bottom Layer .....

After that we cut out both middle layers with the water channels in them....

As next we mounted the mainboard & the PSU inside the Case for a first test and to have a quick look at it.....

With both parts mounted, we decided that we have to overwork the Color scheme of the PSU a little bit...so we took it out and disassembled it so that we could change the Paint on that Top Plate so that it fits our needs....