ASRock Forums : Z270 Extreme4 no video/no post https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Sat, 04 Apr 2026 05:10:53 +0000 Sun, 09 Apr 2017 12:43:57 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=4804 <![CDATA[ASRock Forums]]> https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ <![CDATA[Z270 Extreme4 no video/no post : I&#039;ve tried everything and...]]> https://forum.asrock.com/forum_posts.asp?TID=4804&PID=26907&title=z270-extreme4-no-video-no-post#26907 Author: MOB
Subject: 4804
Posted: 09 Apr 2017 at 12:43pm

I've tried everything and cannot figure out what is wrong.  I'm not any kind of expert, but I've built a few PCs over the years and never had anything like this happen.

I finished my build, and when I turn the power on, I don't get any video out or a post beep.  Motherboard LED lights come on and case & CPU cooler fans spin.  

Searched the internet and tried everything I could find:
1. Removed gpu
2. Tried HDMI and VGA out on MB
3. Rotated RAM between slots (A2/B2 & A1/B1)
4. Tried 1 RAM module in each slot individually
5. Made sure the RAM was fully seated
6. Reset CMOS (jumper and removed battery)
7. Verified CPU and MB power cables

(The psu is new, but used it in a previous build for a month, so it works)

With RAM removed, I get 3 short beeps.  (I installed a MB speaker.)

I see that the BIOS is 1.2, original release.  I would flash to current release, but can't since I don't get video out.

Build Details:
MB: Z270 Extreme4, BIOS version 1.2
CPU: I5-7600K
CPU Cooler: Noctua NH-U12S
RAM: 2x8 GB G.Skill TridentZ (p/n F4-3200C16D-16GTZ) (verified compatible)
PSU: EVGA 650 G3 PSU
GPU: Sapphire Nitro+ Radeon RX 480 OC
SSD: Samsung EVO

Any ideas?
]]> Sun, 09 Apr 2017 12:43:57 +0000 https://forum.asrock.com/forum_posts.asp?TID=4804&PID=26907&title=z270-extreme4-no-video-no-post#26907