https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Fri, 15 May 2026 17:21:51 +0000 Tue, 01 Aug 2017 20:06:58 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=5752 https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33916&title=x370-taichi-another-no-post-problem#33916 Author: Grimsblood
Subject: 5752
Posted: 01 Aug 2017 at 8:06pm

As far as the PSU goes, I am certain it works. I have 2. One new that is an 850w and one old that is a 650w. The 650 is now back in my old system.powering it until I get the new system up and running.

I am also connected to those pins you are speaking of. I checked that like 10 times thinking that I screwed up. I also tried jumping those pins as well.

As far as the fans go, 5 were connected to the board and the rest to a fan controller on the case. I have so many because my AIO came as push/pull.

Thanks for your time, I wanted to double check to make sure I wasn't missing something.]]> Tue, 01 Aug 2017 20:06:58 +0000 https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33916&title=x370-taichi-another-no-post-problem#33916 https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33905&title=x370-taichi-another-no-post-problem#33905 Author: parsec
Subject: 5752
Posted: 01 Aug 2017 at 12:42pm

If you have had both the 24 pin ATX and 4/8 pin CPU power cable connected to the board throughout all your testing, then given what you have told us, it sounds like the board is bad.

That assumes the PSU is truly working, and can run another board/PC fine.

If no fans spin, and the Dr Debug display is not on, and you are certain the PSU is fine, then it is the board.

I keep mentioning the PSU because you said it is new, and if you have never had that PSU successfully powering up a PC, then that PSU is not known to be working correctly.

I wonder about the nine fans you said you use. Are they all connected to fan headers on the board using fan splitter cables? Or are at least some of them connected to a fan controller, or connected directly to the PSU?

Also did you triple check the PC case power switch wires to the power switch pins on the System Panel Header? Polarity of the connections is correct? The correct pins are the two on the right in the top row of four pins. Very easy to make a mistake connecting the wires to that header, everyone has done that at least once. You could simply short those two pins for a moment with a screwdriver to start the PC.
]]> Tue, 01 Aug 2017 12:42:40 +0000 https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33905&title=x370-taichi-another-no-post-problem#33905 https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33899&title=x370-taichi-another-no-post-problem#33899 Author: Grimsblood
Subject: 5752
Posted: 01 Aug 2017 at 10:07am

Update.

Board version (sticker in middle of boars): P2.20 (how does this help?)

RAM: CMK16GX4M2B320016W (RAM tested in another computer, works fine)

Put working 470 in, plugged up to monitor. Attempted to boot. Waited 10 Minutes, no Dr. Debug or post. No fans on board turn on. Power supply is a working one.]]> Tue, 01 Aug 2017 10:07:58 +0000 https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33899&title=x370-taichi-another-no-post-problem#33899 https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33894&title=x370-taichi-another-no-post-problem#33894 Author: datonyb
Subject: 5752
Posted: 01 Aug 2017 at 3:07am

tridentz
3200cl15d-16gtz
has worked fine from day one version 1.6 in mine
as has the same kit worked for another local guy to me with same ram and taichi board
]]> Tue, 01 Aug 2017 03:07:39 +0000 https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33894&title=x370-taichi-another-no-post-problem#33894 https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33884&title=x370-taichi-another-no-post-problem#33884 Author: ket
Subject: 5752
Posted: 01 Aug 2017 at 12:18am

I can tell you right now that Corsair memory in particular seems to be having more problems than other memory manufacturers when it comes to AM4. Grab some TridentZ or RipjawsV memory (not FlareX) and a pint says she will boot first time.
]]> Tue, 01 Aug 2017 00:18:51 +0000 https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33884&title=x370-taichi-another-no-post-problem#33884 https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33846&title=x370-taichi-another-no-post-problem#33846 Author: datonyb
Subject: 5752
Posted: 31 Jul 2017 at 1:21am

can you add details

bios version of board (a sticker on a chip mid board) e.g v1.6 or something

and model of ram

and confirm that you tried to boot bios

with cpu heatsink ram and no other devices fitted yet

please be aware the very first boot of a ryxzen system can take easily 1 min before it does anything
]]> Mon, 31 Jul 2017 01:21:40 +0000 https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33846&title=x370-taichi-another-no-post-problem#33846 https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33842&title=x370-taichi-another-no-post-problem#33842 Author: Grimsblood
Subject: 5752
Posted: 30 Jul 2017 at 11:27pm

I did a brief forum search and came up with one thread that wound up with a different fix. With that being said, here is my problem.

I bought this mobo and a Ryzen 1700 along with a new system. I installed everything and all I got was the LED on the board lighting up, no fans, no Dr. Debug. I had 9 fans installed plus the cooler that came with the CPU, an RX 470, 1 reused SSD, 1 reused HER, 1 new PSU, 2x8 gig Corsair Vengence LOS sticks of RAM.

So, I pulled the board and set it up on the box like a should have done. Removed the cooler and cleaned the thermal paste off (stock cooler comes with a boat load of it). I then hooked the board up to my old working PSU. I placed the cooler back on and tried to boot. Same problem. I removed the GFX card and RAM and tried to get a post code. Nothing. Just the LED's turning colors. I tried using no GFX card and 1 stick of RAM in the different slots. No change in result. I reset CAMOS with the jumper and still got nothing.

As it stands now I am going to take the RAM to a friend's to test it, just because. I am not sure what else to test or what I have missed. To clarify, the result after all the tests I made were the same...no boot, no post, no Dr. Debug code, no fans powering on. Is RMA my only option now?]]> Sun, 30 Jul 2017 23:27:04 +0000 https://forum.asrock.com/forum_posts.asp?TID=5752&PID=33842&title=x370-taichi-another-no-post-problem#33842