ASRock Forums : Overclocking issues with b350 fatal1ty https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Fri, 19 Jun 2026 06:38:54 +0000 Sat, 21 Oct 2017 08:49:59 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=6327 <![CDATA[ASRock Forums]]> https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ <![CDATA[Overclocking issues with b350 fatal1ty : Hello again, well, after 2 days...]]> https://forum.asrock.com/forum_posts.asp?TID=6327&PID=38266&title=overclocking-issues-with-b350-fatal1ty#38266 Author: Sannye
Subject: 6327
Posted: 21 Oct 2017 at 8:49am

Hello again, well, after 2 days testing my 1700 in oc (3.8~1.3v) I got a insight, Fatality doesn't keeps 1.3v every time, floating between 1.3~1.24v in Cinebench, first bench runs well, but sometimes when I remake a second test the motherboard drops its voltage and crashes, probably in 1.35 or 1.375 should be worst, well, press f1 to pay respects for bads vrms.

Here, some infos about vrms.(in portuguese)
https://docs.google.com/spreadsheets/d/1lsVt7uqyLq-V9Pw4RQFhROAtOn98NnyxkVQ5fxmhXJQ/edit#gid=905177351


Edited by Sannye - 21 Oct 2017 at 8:55am]]> Sat, 21 Oct 2017 08:49:59 +0000 https://forum.asrock.com/forum_posts.asp?TID=6327&PID=38266&title=overclocking-issues-with-b350-fatal1ty#38266 <![CDATA[Overclocking issues with b350 fatal1ty : Very few Ryzen processors reach...]]> https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37994&title=overclocking-issues-with-b350-fatal1ty#37994 Author: parsec
Subject: 6327
Posted: 14 Oct 2017 at 9:40pm

Very few Ryzen processors reach 4GHz with less than 1.4V, and 4GHz is the usual OC ceiling. I keep my 1700X at 3925MHz on an X370 board, since going above that need at least 1.4V, and I don't want to use that much VCore.

The reality is this first generation of Ryzen processors are not good for over clocking. We can "OC" them to one or two notches above the maximum Turbo speed on all cores, but that's it.
]]> Sat, 14 Oct 2017 21:40:15 +0000 https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37994&title=overclocking-issues-with-b350-fatal1ty#37994 <![CDATA[Overclocking issues with b350 fatal1ty : I was forced to reboot thanks...]]> https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37987&title=overclocking-issues-with-b350-fatal1ty#37987 Author: FortyFour
Subject: 6327
Posted: 14 Oct 2017 at 5:52pm

I was forced to reboot thanks to ryzen master (who also happened to fail @ 3.8g @ 1.35v), so I decided to try 1.4v @  3.9. It's a no go as well. Heck, even sapphire boost and manually dialing back to 3.8 stopped working as well. I just dialed it back 3.75 @ 1.35 because I'm just done with this.
]]> Sat, 14 Oct 2017 17:52:53 +0000 https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37987&title=overclocking-issues-with-b350-fatal1ty#37987 <![CDATA[Overclocking issues with b350 fatal1ty : My 1700 reach 3.8 at 1.3v with...]]> https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37978&title=overclocking-issues-with-b350-fatal1ty#37978 Author: Sannye
Subject: 6327
Posted: 14 Oct 2017 at 12:09pm

My 1700 reach 3.8 at 1.3v with the last bios, all right here. I don't try more because it's using the box cooler.]]> Sat, 14 Oct 2017 12:09:32 +0000 https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37978&title=overclocking-issues-with-b350-fatal1ty#37978 <![CDATA[Overclocking issues with b350 fatal1ty : FortyFour wrote:My bios is...]]> https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37970&title=overclocking-issues-with-b350-fatal1ty#37970 Author: johndms
Subject: 6327
Posted: 14 Oct 2017 at 10:58am

Originally posted by FortyFour FortyFour wrote:


My bios is the most recent @ 6b. I don't feel like going for 1.4v with a 212 evo. I will have to wait for my fuma to come, which keeps getting delayed even though it's already shipped.
Well, I wasn't suggesting running 1.4v on a 24/7 basis, but simply a few minutes to see if it boots + display. It's smart to be cautious, however. One would think it'd at least give some video regardless if the voltage was enough to be stable or not.]]> Sat, 14 Oct 2017 10:58:32 +0000 https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37970&title=overclocking-issues-with-b350-fatal1ty#37970 <![CDATA[Overclocking issues with b350 fatal1ty : johndms wrote: FortyFour...]]> https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37967&title=overclocking-issues-with-b350-fatal1ty#37967 Author: FortyFour
Subject: 6327
Posted: 14 Oct 2017 at 10:17am

Originally posted by johndms johndms wrote:

Originally posted by FortyFour FortyFour wrote:

I use a 1600x and a 750w psu.

These are my results:
3.7ghz at 1.35 = boots fine/stable
3.8ghz at 1.375 = boots fine/stable
3.9ghz at 1.375 = looks like it boots, but there is no video at all
3.8ghz at <1.375 = looks like it boots, but there is no video at all

What could be the problem here exactly? Is my chip just pure garbage?

Also the sapphire oc option defaults to 3.8ghz at 1.38 with 2933 ram as well. I did the above tests with only 2800 ram though.

What happens if you try 3.9GHz with 1.4v?
I'm pretty sure I know the answer to this next question, but does that board give you an option to adjust CPU Load-line Calibration (LLC)?

Also, if you haven't already, it couldn't hurt to update to the most recent bios version. They tend to increase system stability and memory compatibility.
Bios download page for Fatal1ty AB350 Gaming K4 - http://www.asrock.com/mb/AMD/Fatal1ty%20AB350%20Gaming%20K4/index.asp#BIOS

My bios is the most recent @ 6b. I don't feel like going for 1.4v with a 212 evo. I will have to wait for my fuma to come, which keeps getting delayed even though it's already shipped.
]]> Sat, 14 Oct 2017 10:17:04 +0000 https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37967&title=overclocking-issues-with-b350-fatal1ty#37967 <![CDATA[Overclocking issues with b350 fatal1ty : FortyFour wrote:I use a 1600x...]]> https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37954&title=overclocking-issues-with-b350-fatal1ty#37954 Author: johndms
Subject: 6327
Posted: 14 Oct 2017 at 4:12am

Originally posted by FortyFour FortyFour wrote:

I use a 1600x and a 750w psu.

These are my results:
3.7ghz at 1.35 = boots fine/stable
3.8ghz at 1.375 = boots fine/stable
3.9ghz at 1.375 = looks like it boots, but there is no video at all
3.8ghz at <1.375 = looks like it boots, but there is no video at all

What could be the problem here exactly? Is my chip just pure garbage?

Also the sapphire oc option defaults to 3.8ghz at 1.38 with 2933 ram as well. I did the above tests with only 2800 ram though.

What happens if you try 3.9GHz with 1.4v?
I'm pretty sure I know the answer to this next question, but does that board give you an option to adjust CPU Load-line Calibration (LLC)?

Also, if you haven't already, it couldn't hurt to update to the most recent bios version. They tend to increase system stability and memory compatibility.
Bios download page for Fatal1ty AB350 Gaming K4 - http://www.asrock.com/mb/AMD/Fatal1ty%20AB350%20Gaming%20K4/index.asp#BIOS


Edited by johndms - 14 Oct 2017 at 4:13am]]> Sat, 14 Oct 2017 04:12:40 +0000 https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37954&title=overclocking-issues-with-b350-fatal1ty#37954 <![CDATA[Overclocking issues with b350 fatal1ty : Have you tried an OC with Ryzen...]]> https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37947&title=overclocking-issues-with-b350-fatal1ty#37947 Author: Zach1928
Subject: 6327
Posted: 14 Oct 2017 at 2:32am

[URL=][/URL]Have you tried an OC with Ryzen Master? In theory if it runs stable within windows, the chip is probably capable. Myself and another guy have had 0 luck getting any sort of OC with the B350 Pro 4 so it could be a UEFI issue at certain clocks. In my case, I can get 3.8ghz @1.35v on my 1400 through Ryzen master just fine and dandy, but no such luck through the UEFI.

Edited by Zach1928 - 14 Oct 2017 at 2:32am]]> Sat, 14 Oct 2017 02:32:00 +0000 https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37947&title=overclocking-issues-with-b350-fatal1ty#37947 <![CDATA[Overclocking issues with b350 fatal1ty : I use a 1600x and a 750w psu.These...]]> https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37944&title=overclocking-issues-with-b350-fatal1ty#37944 Author: FortyFour
Subject: 6327
Posted: 14 Oct 2017 at 12:36am

I use a 1600x and a 750w psu.

These are my results:
3.7ghz at 1.35 = boots fine/stable
3.8ghz at 1.375 = boots fine/stable
3.9ghz at 1.375 = looks like it boots, but there is no video at all
3.8ghz at <1.375 = looks like it boots, but there is no video at all

What could be the problem here exactly? Is my chip just pure garbage?

Also the sapphire oc option defaults to 3.8ghz at 1.38 with 2933 ram as well. I did the above tests with only 2800 ram though.

]]> Sat, 14 Oct 2017 00:36:25 +0000 https://forum.asrock.com/forum_posts.asp?TID=6327&PID=37944&title=overclocking-issues-with-b350-fatal1ty#37944