ASRock Forums : [SOLVED] AB350M Pro4 + 1600X = 2,2Ghz :/ https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Wed, 10 Jun 2026 08:47:04 +0000 Wed, 13 Dec 2017 22:15:17 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=6505 <![CDATA[ASRock Forums]]> https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ <![CDATA[[SOLVED] AB350M Pro4 + 1600X = 2,2Ghz :/ : Problem was indeed a faulty CPU....]]> https://forum.asrock.com/forum_posts.asp?TID=6505&PID=40918&title=solved-ab350m-pro4-1600x-22ghz#40918 Author: dreadkopp
Subject: 6505
Posted: 13 Dec 2017 at 10:15pm

Problem was indeed a faulty CPU. switched that for a replacement and clocks were where they supposed to be.
]]> Wed, 13 Dec 2017 22:15:17 +0000 https://forum.asrock.com/forum_posts.asp?TID=6505&PID=40918&title=solved-ab350m-pro4-1600x-22ghz#40918 <![CDATA[[SOLVED] AB350M Pro4 + 1600X = 2,2Ghz :/ : I have the same problem, I still...]]> https://forum.asrock.com/forum_posts.asp?TID=6505&PID=38980&title=solved-ab350m-pro4-1600x-22ghz#38980 Author: Chinodus
Subject: 6505
Posted: 07 Nov 2017 at 1:35pm

I have the same problem, I still hope for a new version of the BIOS...]]> Tue, 07 Nov 2017 13:35:34 +0000 https://forum.asrock.com/forum_posts.asp?TID=6505&PID=38980&title=solved-ab350m-pro4-1600x-22ghz#38980 <![CDATA[[SOLVED] AB350M Pro4 + 1600X = 2,2Ghz :/ : what cpu cooler are you using ]]> https://forum.asrock.com/forum_posts.asp?TID=6505&PID=38955&title=solved-ab350m-pro4-1600x-22ghz#38955 Author: datonyb
Subject: 6505
Posted: 07 Nov 2017 at 4:40am

what cpu cooler are you using
]]> Tue, 07 Nov 2017 04:40:14 +0000 https://forum.asrock.com/forum_posts.asp?TID=6505&PID=38955&title=solved-ab350m-pro4-1600x-22ghz#38955 <![CDATA[[SOLVED] AB350M Pro4 + 1600X = 2,2Ghz :/ : You&#039;re in luck my friends...]]> https://forum.asrock.com/forum_posts.asp?TID=6505&PID=38906&title=solved-ab350m-pro4-1600x-22ghz#38906 Author: brendanw36
Subject: 6505
Posted: 06 Nov 2017 at 2:58am

You're in luck my friends as I believe I have a solution for you.  I had overclocking woes on the ATX version of your board, but they were solved by asking ASRock support for the latest beta BIOS.  They were really thorough about it too.  Even though it took them about five days I got an email with the beta BIOS attached and screenshots of CPU frequency and voltages that they had tested on a test bed they created just to mimic my build.  So when you go here (https://event.asrock.com/tsd.asp) and fill out the form.  Make sure to fill out your processor too even though it is optional.  Respond here if that doesn't work and I'll try my best to help.


Edited by brendanw36 - 06 Nov 2017 at 2:59am]]> Mon, 06 Nov 2017 02:58:45 +0000 https://forum.asrock.com/forum_posts.asp?TID=6505&PID=38906&title=solved-ab350m-pro4-1600x-22ghz#38906 <![CDATA[[SOLVED] AB350M Pro4 + 1600X = 2,2Ghz :/ : Hey Guys, i really hope there...]]> https://forum.asrock.com/forum_posts.asp?TID=6505&PID=38904&title=solved-ab350m-pro4-1600x-22ghz#38904 Author: dreadkopp
Subject: 6505
Posted: 06 Nov 2017 at 2:07am

Hey Guys, i really hope there is some solution to it.

I just got a Asrock AB350M Pro4 and a Ryzen 1600X.

Assembled it, it did POST, great. Flashed latest BIOS (3.10), cleared CMOS, installed Windows. So far so good, unless i checked CPU-Z and Cinebenchscore.

The CPU is stuck @2,2Ghz.

After some research i found that this is a known Problem since APRIL! and mostly related to setting Voltage manually or other OC.

However: i did not touch anything after CMOS reset / load Defaults.

Installed AMD Chipset drivers and all the Windows Updates (Win 10 Pro x64 1709)

Tried all the available Bioses (from 2.10 - 3.10) which didn't help.

Windows Powersettings (Ryzen optimized, power save, full throttle,...) don't change anything.

Manually disabling all the P-State beside P0 @3,6Ghz don't change anything.

Manually setting vCore don'T change anything.

Disabling Cool n Quiet don't change anything ....

Tried setting 3,6Ghz via Ryzen Master don't change anything...

Tried setting 3,6Ghz via Asrock Tuning Tool don't change anything ...


You might see i am really out of ideas... If anyone could help me with that issue that'll be great :)

Cheers


Edited by dreadkopp - 14 Dec 2017 at 12:06am]]> Mon, 06 Nov 2017 02:07:54 +0000 https://forum.asrock.com/forum_posts.asp?TID=6505&PID=38904&title=solved-ab350m-pro4-1600x-22ghz#38904