ASRock Forums : X399 tweaking issue https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Sun, 17 May 2026 03:23:35 +0000 Wed, 06 Dec 2017 10:28:43 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=6815 <![CDATA[ASRock Forums]]> https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ <![CDATA[X399 tweaking issue : The CPU actually got up to 4.2...]]> https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40514&title=x399-tweaking-issue#40514 Author: Pape
Subject: 6815
Posted: 06 Dec 2017 at 10:28am

The CPU actually got up to 4.2 by itself.
At 1.050 I have some hesitation and the system actually push it up to 1.080.

Most of my settings are in auto, for sure I need to tune down the voltage but do not wish to place fixed value.

Tried different ram overclock tonight and as soon as I hit any overclock I get the 6 beeps and the FC code as long as it is beeping after it the normal code dances.]]> Wed, 06 Dec 2017 10:28:43 +0000 https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40514&title=x399-tweaking-issue#40514 <![CDATA[X399 tweaking issue : Point was you should only need...]]> https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40442&title=x399-tweaking-issue#40442 Author: lowdog
Subject: 6815
Posted: 05 Dec 2017 at 11:21am

Point was you should only need SOC of 1.05 for your ram and not 1.1+ .....now if you go overclocking your cpu this value may change depending on your cpu/imc]]> Tue, 05 Dec 2017 11:21:08 +0000 https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40442&title=x399-tweaking-issue#40442 <![CDATA[X399 tweaking issue : So I tried 1.050v and 1.130 v...]]> https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40435&title=x399-tweaking-issue#40435 Author: Pape
Subject: 6815
Posted: 05 Dec 2017 at 10:30am

So I tried 1.050v and 1.130 v in the vddc soc still got my 6 beeps.

Decided to use the ryzen ram calculator value, that was a no go lol, got the 6 beeps + reboot + 3 beep in the end the system performed a bios reset.

So now I can say not vddc soc or ram voltage.]]> Tue, 05 Dec 2017 10:30:45 +0000 https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40435&title=x399-tweaking-issue#40435 <![CDATA[X399 tweaking issue : I get the 6 beeps when I run my...]]> https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40433&title=x399-tweaking-issue#40433 Author: lowdog
Subject: 6815
Posted: 05 Dec 2017 at 10:01am

I get the 6 beeps when I run my 64GB @ 2933Mhz......you should try lowering the SOC voltage....I only need 1.05v to run my memory stable.


I have no idea why it beeps 6 times when running the XMP profile...you'd have to ask an Asrock engineer who codes the bios I suppose.

Edited by lowdog - 05 Dec 2017 at 10:02am]]> Tue, 05 Dec 2017 10:01:20 +0000 https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40433&title=x399-tweaking-issue#40433 <![CDATA[X399 tweaking issue : Joel_l wrote:When you boot...]]> https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40426&title=x399-tweaking-issue#40426 Author: Pape
Subject: 6815
Posted: 05 Dec 2017 at 7:36am

Originally posted by Joel_l Joel_l wrote:

[URL=][/URL]When you boot into Windows, have you verified what the memory is actually running at?
Did you mean 1900X?


Yup 1600 mhz or 3200.
Actually I read my soc value out of the Asrock overclock utility as the bios only display auto.

I also found using the same utility that if I increase the ram voltage the system add 0.1X v to it. So let say I increase to 1.365 v I will read in the Asrock software 1.377 v. Something happens if I do 1.375 v in bios in Windows I read 1.385v.

The beep are there to tell me something as the POST take a extra 2 seconds to do when I get the 6 beeps.

]]> Tue, 05 Dec 2017 07:36:37 +0000 https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40426&title=x399-tweaking-issue#40426 <![CDATA[X399 tweaking issue : Heya I have x399 Fat Pro and im...]]> https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40417&title=x399-tweaking-issue#40417 Author: JUANNY
Subject: 6815
Posted: 05 Dec 2017 at 12:31am

Heya I have x399 Fat Pro and im using a beep speaker for post diagnosis and found that the six beeps is part of the MB post process (it beeps 6 times at the start of every post ) While OC my memory it it had a prob with the OC settings it would do the normal six beeps then another 3 signaling memory issues so the six beeps are normal
]]> Tue, 05 Dec 2017 00:31:12 +0000 https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40417&title=x399-tweaking-issue#40417 <![CDATA[X399 tweaking issue : When you boot into Windows, have...]]> https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40409&title=x399-tweaking-issue#40409 Author: Joel_l
Subject: 6815
Posted: 04 Dec 2017 at 11:17pm

When you boot into Windows, have you verified what the memory is actually running at?
Did you mean 1900X?
]]> Mon, 04 Dec 2017 23:17:06 +0000 https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40409&title=x399-tweaking-issue#40409 <![CDATA[X399 tweaking issue : Yup the system boom in win10 in...]]> https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40398&title=x399-tweaking-issue#40398 Author: Pape
Subject: 6815
Posted: 04 Dec 2017 at 8:20pm

Yup the system boom in win10 in OC
It is 6 beeps in a row no space in between.
The beeps happen while thé display Is black just before the Asrock bios logo.

The memory is installed as 2 kits in quad channel slots and recognized as quad mode so no problem there.

From what I was reading 1.05 is recommended for OC but the system go 1.12 is that not too much ? anyone running more than 1.15 on soc ?]]> Mon, 04 Dec 2017 20:20:50 +0000 https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40398&title=x399-tweaking-issue#40398 <![CDATA[X399 tweaking issue : Pape wrote:Hi,My build is stable...]]> https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40391&title=x399-tweaking-issue#40391 Author: parsec
Subject: 6815
Posted: 04 Dec 2017 at 12:53pm

Originally posted by Pape Pape wrote:

Hi,

My build is stable for over a week now, therefore I OC my ram to 3200 using the xmp setting.
When I do this I get the 6 beeps or 2X 3 beeps at POST.

The memory is overclock and system is stable therefore i only need to get rid of the beeping.
Voltage is autamacticly set to 1.350, I did push it as far as 1.375.
The vddc soc is set to auto and i think this is where is my beeping problem comming.
When I run the ram at stock the vddc soc voltage is at 0.90 but when I OC the ram, the voltage go to 1.120.

The ram is 4 X F4-3200c14-8gfx
MB is taichi x399
Cpu is a 1800X

Should i set my vddc_soc to a fixed value of 1.120 / 1.150 no sure 0.02 increment is supported or should i look somewhere else to get rid of my beeping issue?


Do you mean the PC boots Windows 10 normally, but you just get the beeps during POST when you enable the XMP profile?

If the PC does not boot Windows with XMP enabled, then the current memory settings and memory voltages will need to be adjusted, and possibly the speed reduced.

When you hear the beeps, does the PC seem to start the POST and startup cycle more than once? Do you hear three beeps, then quiet for several seconds, and then three beeps again?

If you do, that seems to be the AMD memory training happening. That also happens with Ryzen AM4 boards. AM4 boards have an option called AMD Advanced Boot Training in the OC Tweaker screen. Your board's manual does not include that option, but it may have been added in a later UEFI/BIOS version.

When the VDDCR_SOC voltage changes from 0.900V to 1.120V when you OC the memory or use the XMP profile, do you change it back to 0.900V?

You should set the VDDCR_SOC voltage to 1.120V, that is needed when you OC the memory to 3200. It might need more voltage to stop the beeping, how much more can only be found by testing.

Actually, the Memory QVL List for your board only has your memory model verified at 3200 with just two DIMMs, not four. Your memory is the 16GFX entry, you are using two of the 16GFX kits, correct?



For a test, enable the XMP profile, but set the memory speed to 2933 or 3066, to check if that stops the beeping.


]]> Mon, 04 Dec 2017 12:53:14 +0000 https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40391&title=x399-tweaking-issue#40391 <![CDATA[X399 tweaking issue : Hi,My build is stable for over...]]> https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40373&title=x399-tweaking-issue#40373 Author: Pape
Subject: 6815
Posted: 04 Dec 2017 at 4:45am

Hi,

My build is stable for over a week now, therefore I OC my ram to 3200 using the xmp setting.
When I do this I get the 6 beeps or 2X 3 beeps at POST.

The memory is overclock and system is stable therefore i only need to get rid of the beeping.
Voltage is autamacticly set to 1.350, I did push it as far as 1.375.
The vddc soc is set to auto and i think this is where is my beeping problem comming.
When I run the ram at stock the vddc soc voltage is at 0.90 but when I OC the ram, the voltage go to 1.120.

The ram is 4 X F4-3200c14-8gfx
MB is taichi x399
Cpu is a 1800X

Should i set my vddc_soc to a fixed value of 1.120 / 1.150 no sure 0.02 increment is supported or should i look somewhere else to get rid of my beeping issue?]]> Mon, 04 Dec 2017 04:45:52 +0000 https://forum.asrock.com/forum_posts.asp?TID=6815&PID=40373&title=x399-tweaking-issue#40373