ASRock Forums : Asrock H110 Pro BTC+ Power https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Tue, 07 Apr 2026 15:57:17 +0000 Wed, 03 Jan 2018 16:04:04 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=7152 <![CDATA[ASRock Forums]]> https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ <![CDATA[Asrock H110 Pro BTC+ Power : Hi,In the manual there is a...]]> https://forum.asrock.com/forum_posts.asp?TID=7152&PID=42194&title=asrock-h110-pro-btc-power#42194 Author: turing
Subject: 7152
Posted: 03 Jan 2018 at 4:04pm

Hi,

In the manual there is a section mentioned that if you are using more then 3 GPU, 
you should connect power also to the: 2 x 4pin molex connectors + SATA connector.
Now, I have PSU:

EVGA SuperNOVA 1600 P2, 80+ PLATINUM 1600W
(https://www.evga.com/products/product.aspx?pn=220-p2-1600-x1)

And I have 2 cables there:

(1) Four-Pin Peripheral Cable - it's 3x molex to 6 pin with just 4 connections.
6 pin HW layout (* is active pin, O is empty pin):
O**
**O

(2) SATA / Four-Pin Peripheral Cable - it's 2x molex+1x SATA to 6 pin with just 5 connections
6 pin HW layout (* is active pin, O is empty pin):
***
**O

I saw that people connecting just the 2 molex on the board from the same cable without the SATA.
So my questions are:

1. do I need to connect 2x molex + 1x SATA if I am going to use 8 GPU for instance?
2. If I need to connect just the 2x molex, can I use the cable I have in that PSU like in (1)?
3. If I need to connect both 2x molex & 1x SATA, can I use the cable I have in that PSU like in (2) - means one cable that connect to PSU for 1xSATA AND 2x molex?



THANKS!
Cheers.
]]> Wed, 03 Jan 2018 16:04:04 +0000 https://forum.asrock.com/forum_posts.asp?TID=7152&PID=42194&title=asrock-h110-pro-btc-power#42194