ASRock Forums : z370 extreme 4: Sata Ports

ASRock Forums : z370 extreme 4: Sata Ports https://forum.asrock.com/ Copyright (c) 2006-2013 Web Wiz Forums - All Rights Reserved. Fri, 01 May 2026 00:24:49 +0000 Tue, 20 Feb 2018 07:58:20 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 12.04 360 https://forum.asrock.com/RSS_post_feed.asp?TID=7718 <![CDATA[ASRock Forums]]> https://forum.asrock.com/forum_images/web_wiz_forums_black.png https://forum.asrock.com/ <![CDATA[z370 extreme 4: Sata Ports : 1)M.2 socket usually can work...]]> https://forum.asrock.com/forum_posts.asp?TID=7718&PID=45487&title=z370-extreme-4-sata-ports#45487 Author: ppv
Subject: 7718
Posted: 20 Feb 2018 at 7:58am

1)

M.2 socket usually can work in SATA or PCIE mode. When works in PCIE mode, then it consumes more PCIE lanes.

You can use all 6 sata sockect when using standard sata drivers when nothing connected to M.2 sockets.

If you use M.2 Sata drive at M2_1 then it will probably disable one of SATA3_1 or SATA3_5.

If you use M.2 NVMe drive PCIE x4 speed, then it will disable both SATA3_1 and SATA3_5

If you need more SATA sockets, buy additional SATA connroller and plug it to standard PCIE connector.

There are also available M.2 cards for standard PCIE sockets.

2) it is probably for fastest possible boot time, when fast boot option is enabled in bios. make sure your OS drive is connected to sata3_0 or M2_1 to minimize boot time / boot drive detection.

however it does not work well on my board. i have toshiba ssd connected to sata3_0 and it is not ultra fast boot, device detection takes some time anyway. I should try to remove all other drives besides OS disk for comparison.

]]> Tue, 20 Feb 2018 07:58:20 +0000 https://forum.asrock.com/forum_posts.asp?TID=7718&PID=45487&title=z370-extreme-4-sata-ports#45487 <![CDATA[z370 extreme 4: Sata Ports : Hey Guys, need your help with...]]> https://forum.asrock.com/forum_posts.asp?TID=7718&PID=45353&title=z370-extreme-4-sata-ports#45353 Author: Tim.111888
Subject: 7718
Posted: 18 Feb 2018 at 8:42am

Hey Guys, need your help with "z370 extreme 4" Sata Connectors optimization.

There are 2 things I don't understand.

1.)

------------------------------------------

"z370 extreme 4" manual says:

- M2_1, SATA3_0 and SATA3_1 share lanes. If either one of them is in use, the others will be disabled.

- M2_2, SATA3_4 and SATA3_5 share lanes. If either one of them is in use, the others will be disabled.

------------------------------------------

Question: Does it mean if I connect a drive to SATA3_0, SATA3_1 becomes unusable? Why would you even include SATA3_1 into the system if you can use just 1 of them? They are even placed directly above each other.

2.)

------------------------------------------

"z370 extreme 4" manual says:

- To minimize the boot time, use Intel® Z370 SATA ports (SATA3_0) for your bootable devices.

------------------------------------------

Question: So only SATA3_0, SATA3_1 are Z370 SATA and the others (2,3,4,5) are not?

Thank you

]]> Sun, 18 Feb 2018 08:42:32 +0000 https://forum.asrock.com/forum_posts.asp?TID=7718&PID=45353&title=z370-extreme-4-sata-ports#45353