Intel MAC addresses are invalid in both CMOS/FLASH |
Post Reply | Page 12> |
Author | ||
GerryBoy
Newbie Joined: 11 Sep 2016 Status: Offline Points: 9 |
Post Options
Thanks(0)
Posted: 14 Sep 2016 at 5:59am |
|
tried again. My usb was my boot drive C: so nothing wrong with that.
Looked at help files on usb. Instead of using the command "mac cxxxxxxxxxxxx", I used "mac w", this gives you the option then to input the mac address with a scanner or keyboard. When I keyed in my mac address D06099xxxxxx. I got an error saying not supported and there was a list of mac addresses with the first 6 digits listed that was supported. I noticed D06099xxxxxx was not in the list but D05099xxxxxx was. I tried again using the w(keyboard method) using D05099xxxxxx. It was successful this time. My eyesight must be starting to go . I must have read the sticker on the motherboard wrong. I have not checked it again as there are a lot of cables in the way...... Anyway it is sorted now. Thanks for your help and sorry for wasting your time. Thanks again....... |
||
GerryBoy
Newbie Joined: 11 Sep 2016 Status: Offline Points: 9 |
Post Options
Thanks(0)
|
|
I used the internet option in the bios. I will try what you suggest with the usb stick.... Thanks |
||
parsec
Moderator Group Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
|
|
The 2.10 UEFI for the Z97E-ITX/ac board is dated 6/29/16. So almost two and a half months old. This is the first thread about this problem I've ever seen. It seems odd IMO that we've never seen this issue until now. Sure, I could have missed some threads, but all of them? That is, if it is related to the UEFI 2.10 update. Any UEFI update should not change or rewrite the MAC addresses, so why did they apparently become corrupted? GerryBoy, what method did you use to update the UEFI to 2.10? Please don't try to run the UEFI 2.10 update you did again, until we know what method you used. |
||
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
|
Maybe oversight, maybe not. Yet this post and the one above it didn't use the correct format for calling it from the usb stick CD to the usb stick and issue mac c [Your MAC Id] <Enter key> |
||
GerryBoy
Newbie Joined: 11 Sep 2016 Status: Offline Points: 9 |
Post Options
Thanks(0)
|
|
Thanks Wardog....
Will update you if I get a result.... |
||
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
|
Odd. There is an I218V flashing section in the archive.
Contact Tech Support HERE and ask of them. Maybe they need to address the current i218V section somehow. Keep us posted huh. |
||
GerryBoy
Newbie Joined: 11 Sep 2016 Status: Offline Points: 9 |
Post Options
Thanks(0)
|
|
Managed to set mac address in windows 10 properties.
It works but still no good on bios |
||
GerryBoy
Newbie Joined: 11 Sep 2016 Status: Offline Points: 9 |
Post Options
Thanks(0)
|
|
Looks like the tool does not support my LAn.
Ran the command using: mac ad06099xxxxxx (replacing c with a) Got the following: Intel i218V(0x15A1) #1 Invoke Vendor's Utillity: suppoert 'w', 'c' and 'l' function only! Unsupported |
||
GerryBoy
Newbie Joined: 11 Sep 2016 Status: Offline Points: 9 |
Post Options
Thanks(0)
|
|
Hi,
Windows 10, Sorry, Screenshot is from instructions on site. Have made bootable dos usb, booted of stick, ran the command: mac cd06099xxxxxx (xxxxxx being the rest of the mac address from sticker on motherboard. When I run all I get back is "LanInfo.LanDeviceCount=1" Should I be using the older version Lan Tool? Thanks |
||
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
|
PS
While you X'd out one MAC ID in the pic, you missed the other two shown Edited by wardog - 11 Sep 2016 at 9:58pm |
||
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |