X370 Gaming K4 - new BIOS with AGESA 1.0.0.6&a |
Post Reply | Page <1 34567 30> |
Author | |
Jahnal
Newbie Joined: 01 Jun 2017 Status: Offline Points: 20 |
Post Options
Thanks(0)
|
My Corsair CMK16GX4M2B3200C16 is running at 2.4 at 2933 MHz without errors. On two clicks, XMP and speed setting.
So, as I read it, I do not want to experiment with the new BIOS. |
|
EpicPants
Newbie Joined: 13 Mar 2017 Location: Singapore Status: Offline Points: 24 |
Post Options
Thanks(0)
|
Corsair led cmu16gx4m2c3000c15 v5.30 not working on gaming k4 bios 2.50. Only boots with 2400mhz
|
|
razielrah
Newbie Joined: 13 May 2017 Status: Offline Points: 26 |
Post Options
Thanks(0)
|
ASRocK X370 Fatal1ty K4 with Ryzen 1700X@3875mhz 1.35Vcore and CMU16GX4M2C3200C16 REV 4.24@3066mhz 16 18 18 18 36 1T 1.35V.
RAM won't even boot at 3200MHz, no beep, just get to see the option to enter bios and freezes and i need to clear cmos. Ideas as of why? Bios 2.50 better than 2.40 who ran the ram at 2666MHz but still not the 3200MHz that i wish. Are you guys sure that this MB can't run ram at higher speeds than 2933MHz? Edited by razielrah - 09 Jun 2017 at 11:49pm |
|
noneis
Newbie Joined: 07 Jun 2017 Status: Offline Points: 13 |
Post Options
Thanks(1)
|
Overclocking of P-State 1 & 2 doesn't work in 2.5.0 BIOS!. It doesn't boot and I have to reset CMOS.
Overclocking of P-State 0 and undervolting of P-State 1 & 2 still works. My Corsair LPX CMK16GX4M2B3200C16 is stable at 2933 @ 14-15-15-30-1T same as with 2.4.0 BIOS. Higher clocks still don't boot. Edited by noneis - 10 Jun 2017 at 12:43am |
|
DarkbladeX
Newbie Joined: 08 Jun 2017 Status: Offline Points: 2 |
Post Options
Thanks(0)
|
For 3200 Mhz: You can also try to increase SoC Voltage to max of 1.2 V (do not exceed!). Edited by DarkbladeX - 10 Jun 2017 at 12:57am |
|
razielrah
Newbie Joined: 13 May 2017 Status: Offline Points: 26 |
Post Options
Thanks(0)
|
Yes did set CT to 2T and Gear Down Mode disabled. the SoC Voltage was set to 1.1V. |
|
glhrmbhnrt
Newbie Joined: 09 Jun 2017 Location: Brazil Status: Offline Points: 4 |
Post Options
Thanks(0)
|
With Bios 2.5 I managed to boot semi-stable at 3200mhz ram (G.Skill Trident Z CL16, not RGB), tried to pump up the voltages and changing a lot of things, but no way to turn stable. Also tried 3066 but got the same results. I could get into Windows and play games, but prime won't run and stressing leads to blue screen.
Got stable with reduced timings at 2933Mhz with CL14-32@1.35v, also the benchmarks showed little to no difference between the 3200Mhz and 2933Mhz (maybe because of the instability?). Previous bios I was unable to even boot above 2400mhz CL16-32@1.35v. |
|
Fatal1ty X370 Gaming K4
Ryzen 7 1700 @ 3.9Ghz 1.37v G.Skill Trident Z F4-3200C16-8GTZ @ 2933Mhz 14-14-14-31 1T - 2x8gb 1.35v Seasonic 620w Sapphire R9 290 |
|
pawlos74
Newbie Joined: 09 Jun 2017 Location: Canada Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Like I said before I have G-skill F4 3200C16D-32GTZA CL16-16-16-36. I was happy with the new Bios but it seems not stable for me. It looks like 2933 Mhz was sweet spot but after some testing with prime 95 computer shut down itself. I couldn't boot after Every time getting strange C0 error. After few restarts, I finally managed to boot and reloaded Bios 2.40. At 2666 Mhz everything is OK.
Should I change memory or maybe I'm doing something wrong. Any help is greatly appreciated
|
|
razielrah
Newbie Joined: 13 May 2017 Status: Offline Points: 26 |
Post Options
Thanks(0)
|
Try setting the RAM speed test for stability and after that OC CPU and test stability. Also after a few failed boot attempts clear cmos |
|
Kirurgs
Newbie Joined: 09 Jun 2017 Status: Offline Points: 136 |
Post Options
Thanks(0)
|
So I tried BIOS v. 2.50, for me that was a total downgrade, w/ 2.4 I could go 2666 easy, now with 2.5 I can boot (reliably) only 2133, anything above that goes to beep-beep-beep and back to 2133. Total disappointment.
W/ 2.5 I booted 2933 ONCE (not more), no way doing that again, because it won't work 99% of time. Options in BIOS (compared to 2.4) are somewhat more, but that really does not matter if I can't boot > 2133 (at least for me). I tried SOC voltage 1.1 + DRAM up to 1.375, it does not help at all. Re-flashed BIOS back to 2.4, 2666 easy again, no voltage adjustments needed or anything else, so, Asrock please, take our feedback and fix this. Thanks in advance. |
|
Post Reply | Page <1 34567 30> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |