Taichi x370 new bios 3.1 wont post |
Post Reply | Page 12> |
Author | ||
michaelpinkava
Newbie Joined: 02 Sep 2017 Location: USA Status: Offline Points: 8 |
Post Options
Thanks(0)
Posted: 02 Sep 2017 at 7:22pm |
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
|
michaelpinkava
Newbie Joined: 02 Sep 2017 Location: USA Status: Offline Points: 8 |
Post Options
Thanks(0)
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
|
Well, the seeming good news is you shouldn't need to tear your loop out.
4f is relating to memory But what you're going to need to do is ........... 1. Make sure you memory is FULLY seated in slots A2 and B2. Pull them and reseat each. Clear BIOS and test Also please state which memory you have please. Heck, post you system specs please. Post back after reseating and clearing the BIOS please. I'm not 100% sure that will get you up and running but this is the first diagnostic step. |
||
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
|
michaelpinkava, if you can boot into the BIOS, please hit F9 to Load UEFI Defaults then Exit and Save. If can get into BIOS but F9 does not help, then use Instant Flash to go back to your working BIOS. Do an F9 plus Exit and Save. Do not load any saved configurations or set any overclock. Enjoy, John.
|
||
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
||
michaelpinkava
Newbie Joined: 02 Sep 2017 Location: USA Status: Offline Points: 8 |
Post Options
Thanks(0)
|
|
I tried this with no success. I even pulled the cmos battery. I tried each ram individually in the a2 slot. My memory was stable before the bios flash and is on the qvl 1800x, gskill F4-3200C14D-32GTZR, evga 1080ti ftw 3, samsung 960 pro m2 ssd I was running everything stock. The ram was running xmp profile timings at 2933. Thank you for your responses. |
||
michaelpinkava
Newbie Joined: 02 Sep 2017 Location: USA Status: Offline Points: 8 |
Post Options
Thanks(0)
|
|
I am not able to make it that far. I do not not make it far enough in post to activate usb for my keyboard. I tried rebooting and mashing f6 hoping to catch instant flash. Thank you for your response.
Edited by michaelpinkava - 03 Sep 2017 at 12:14am |
||
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
|
michaelpinkava, glad to try helping, sorry has not been effective. Please post the length (Properties, in bytes) and the hash codes for the BIOS file you used. Perhaps you got a bad DL. ASRock should always post hash codes for all their DLs. Thanks and enjoy, John.
EDIT: My hash codes:
Edited by MisterJ - 03 Sep 2017 at 2:05am |
||
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
||
michaelpinkava
Newbie Joined: 02 Sep 2017 Location: USA Status: Offline Points: 8 |
Post Options
Thanks(0)
|
|
CRC-32 17eac066 MD5 Hash 71b406690689594d9250367aef445d81 SHA1 Hash 72c1d0016153ba831089b359dfe72e7c848b4d86 SHA256 Hash 6f093e00617bc6f06506b844e64b7d81c8f94b60c0fee6d3b4b1e8bd26649937 SHA512 Hash 1e6779dd2c58f1ff5101fa8b9c50fb09188777414e26084c3b5b79ede58a773239a9847198c6abb4859f55e56151a2f6e16c464dc5d78adfd236ecbbf05db80b Beginning to think i'm just unlucky seeing how few posts there are of failed flashes.
|
||
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
|
michaelpinkava, sorry. My only suggestion is to cantact ASRock. Please tell us if you did not use Instant Flash. Enjoy, John.
|
||
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
||
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |