|
New ASRock Z170 Pro4 - Randomly freezing |
Post Reply 
|
Page <12345 6> |
| Author | ||
wardog 
Moderator Group 
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 12 Jan 2016 at 10:08pm |
|
Yes and no. 99% of the time, No. It's gobbeldy gook as to why not and too in-depth for a discussion here as to the specifics. Suffice it that it is that way by design. |
||
 |
||
|
joejccva71
Newbie 
Joined: 11 Jan 2016 Location: Massachusetts Status: Offline Points: 25 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 Jan 2016 at 10:17pm |
|
Yea exactly, I mean I didn't have them right next to each other. I had them in A and B but I guess in the wrong A and B slots. :)
Will do. I'm going to see how it does tonight. It's always crashed in MS Flight Simulator X because I have the graphics turned all the way up lol, but last night it was smooth sailing all night. Then I ran that OCCT. I'm having high hopes. Thanks for all your help too.
Edited by joejccva71 - 12 Jan 2016 at 10:17pm |
||
|
||
|
DownyTif
Newbie
Joined: 14 Jan 2016 Status: Offline Points: 16 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jan 2016 at 10:27pm |
|
|
Wow, while reading this thread, I check my mind to be sure I wasn't joejccva71 haha, since I have EXACTLY the same experience.
I did the same testing, had the memory in A1-B1, etc. My PC was freezing totally randomly. When I changed to A2-B2, never got a freeze again! Until yesterday... I was playing Dying Light and after 1hour or so, froze. Had to do a hard reboot. But before that, I played a lot of Fallout 4, Rocket League (not the same day, but every day or 2) and didn't get a freeze. My build: http://ca.pcpartpicker.com/p/6rP86h joejccva71: Any news on your side?? Also, I just saw that:
http://www.tomshardware.com/news/skylake-prime-number-bug,30979.html |
||
|
||
|
Xaltar
Moderator Group
Joined: 16 May 2015 Location: Europe Status: Offline Points: 24653 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jan 2016 at 10:38pm |
|
|
I doubt it is the prime bug as that occurs only when AVX is forced in prime 95 Not many (if any) apps/games make use of AVX. I am not saying it is impossible, tessellation may be coded to take advantage of AVX for example but I highly doubt it as it would mean systems lacking the feature would be severely disadvantaged.
@DowneyTif: When you switched slots to A2/B2 did you clear CMOS? It is always wise to do so when switching memory slots as UEFIs can be funny about keeping settings they shouldn't. Are there any errors in your event logs that could indicate where the problem is coming from? I doubt the hard lock itself would have left one but there may be others that led up to it.
|
||
|
||
|
DownyTif
Newbie
Joined: 14 Jan 2016 Status: Offline Points: 16 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jan 2016 at 11:12pm |
|
I remember having cleared the CMOS to default by clicking the button in the BIOS (reset UEFI to default), but I can't remember if I did this before or after changing the RAM slots. While using A1-B1, my build was freezing almost every day (while playing games, looking at videos, at idle, etc.) Since I changed to A2-B2 (on decembre 28th), no freeze at all except for yesterday. I'll try to reset the CMOS again. Did I reset it correctly the first time? For the events, I have exactly the same thing as joejccva71. No events at freeze time, just events after I power-off then on the PC.
|
||
|
||
|
joejccva71
Newbie
Joined: 11 Jan 2016 Location: Massachusetts Status: Offline Points: 25 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jan 2016 at 11:13pm |
|
Yea ever since I switch the memory to A2-B2 I haven't had a freeze yet and I've played MS Flight Simulator X on full settings, Skyrim, Witcher 3 ...all on Ultra settings. No problems so far. I didn't clear the CMOS but I did reset the BIOS UEFI to defaults. I was thinking after 2 full days of no freezing that maybe I was ready to overclock again. But you said you've crashed since so I dunno. I don't know about this Skylake prime number bug. Do you have the same board? Z170 Pro4?
Edited by joejccva71 - 14 Jan 2016 at 11:18pm |
||
|
||
|
DownyTif
Newbie
Joined: 14 Jan 2016 Status: Offline Points: 16 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jan 2016 at 11:25pm |
|
Yep, exactly the same board. But wait... hum I'm kind of new to this building my own PC (but got help). I think I'm mixing up the CMOS and BIOS UEFI, cause I did reset the BIOS UEFI to default. How to I clear the CMOS?
|
||
|
||
|
joejccva71
Newbie
Joined: 11 Jan 2016 Location: Massachusetts Status: Offline Points: 25 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jan 2016 at 11:42pm |
|
It's a jumper on the motherboard. With the machine powered down you take one of the little jumpers that came with the board and place it on the two pins on the board for about 5 seconds, then remove it. Power on the machine and the CMOS is reset.
|
||
|
||
|
Xaltar
Moderator Group
Joined: 16 May 2015 Location: Europe Status: Offline Points: 24653 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jan 2016 at 11:45pm |
|
|
Check page 22 of your user manual for instructions to clear CMOS. It may not help but it certainly won't hurt. Resetting to factory defaults does not clear CMOS as effectively as the jumper.
|
||
|
||
|
wardog
Moderator Group
Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
Quote Reply
Posted: 15 Jan 2016 at 12:17am |
|
Hooray! |
||
|
||
|
Post Reply
|
Page <12345 6> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
joejccva71 wrote: