B450 fatality ITX - bios 3.10 broken |
Post Reply |
Author | |
Am4_bored
Newbie Joined: 31 Mar 2019 Status: Offline Points: 7 |
Post Options
Thanks(0)
Posted: 31 Mar 2019 at 11:15am |
Bios 3.10 has problems and I can?™t downgrade. Instant flash says ?śinvalid file??when trying to downgrade. There is some kind of problem with the boot loader. When my SSD is connected the system will display boot screen but will not go into windows or respond to any key commands to enter bios. With ssd disconnected I can get into the bios and the keyboard responds.
When will a newer bios be available to correct this issue? |
|
Am4_bored
Newbie Joined: 31 Mar 2019 Status: Offline Points: 7 |
Post Options
Thanks(3)
|
I have fixed this issue via downgrade. Here are the instructions (very complicated since instant flash will not allow for downgrade).
1. Create Windows live bootable USB (Windows To Go) 2. Unhook all SATA, such as HDD and SSD (this allows keyboard / bios to work). Works around boot loader bug. 3. Disable Secure Boot (required to flash from Windows). 4. Boot into Windows live USB (please note sometimes may not be detected due to boot loader bug, but usually works after a few tries). 5. Open a command line with admin privileges. 6. Run AFUWINx64.exe with the parameters /CAPSULE /B /P /N using older bios, e.g., 1.30, 1.70. This program is included with ASRock download. 7. Allow system to shutdown and instant flash should start during reboot. I take no responsibility if this bricks your system, but it saved mine. ASRock should consider pulling this BIOS until this boot bug is fixed. Not sure if it impacts all chips. My Chip was a Ryzen 3 2200G with a MX500 SSD. |
|
xhue
Groupie Joined: 17 Aug 2018 Status: Offline Points: 634 |
Post Options
Thanks(0)
|
Hmm, interesting reading.
Thanks for the follow-up! |
|
Sukren
Newbie Joined: 06 Apr 2019 Status: Offline Points: 3 |
Post Options
Thanks(0)
|
I have the same problem, bios 3.10 is broken, don't see my M.2 SSD :(
|
|
Pluss
Newbie Joined: 06 Apr 2019 Status: Offline Points: 2 |
Post Options
Thanks(0)
|
Same. :( Pc config: ryzen 2600, M.2 Sata SSD Micron 1100
|
|
MethanolMan
Newbie Joined: 06 Apr 2019 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
I have an issue where my Monitor goes to sleep. even with settings for screen to never and Sleep to never sleep.
I've tried New cables new Different Monitors. I have also tried sop instructions but I don't understand them. It says to uninstall the vgea driver but my says Gtx 1080. So in did as it said and ended up with a windows drive there. And still can Downgrade my bios. Im lost on your instructions on line 6. I would need more dumbing down for me to follow it. Anyway thanks for listening |
|
Daveydguk
Newbie Joined: 07 Apr 2019 Status: Offline Points: 62 |
Post Options
Thanks(0)
|
AMD HDMI audio was also broken on my HTPC.
Using saphire rx580 4gb version. Will wait for version 3.20 I think. |
|
Sukren
Newbie Joined: 06 Apr 2019 Status: Offline Points: 3 |
Post Options
Thanks(0)
|
making various checks I noticed that in the bios the ssd disk is recognized. The problem is in the windows boot but I couldn't fix. Making a new installation I restored the system, everything works. I have not found the problem of the audio hdmi reported, I use a RX 850 with 8 GB.
|
|
Pluss
Newbie Joined: 06 Apr 2019 Status: Offline Points: 2 |
Post Options
Thanks(0)
|
The solution posted above is way too complicated for me. I borrowed an Athlon 200ge from a friend and it worked. I was able to downgrade to 1.7 through Windows, not instant flash.
|
|
gkagg
Newbie Joined: 22 Jun 2019 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Hello. Where did you find AFUWINx64.exe? Can you flash the Instant flash files as well? Thanx |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |