Ryzen 3000 series support

Is there anywere info on whether will newer Agesa's, like 1.0.0.5, going to be supported on firts gen boards, like B350 chipset? Or the support for first gen is slowly dying?

I have never been able to boot into bios, and have gotten no support from asrocks help desk. I'm about to spend 200 bucks on a new motherboard but I thought I'd try one last time to ask for help. I'm still on the first bios version that shipped back when ryzen gen 3 came out. and I am completely lost, please send help

Hi guys. I recently switched intel i5 4430 -> Ryzen 5 3600. And not quite happy about it.

My system spec:

• Ryzen 5 3600
• Asrock B450M Pro4 (BIOS v. 3.90 OTB)
• Crucial Ballistix Red DDR4 32GB (2x16GB), 3200MHz (BL2K16G32C16U4R)
• Crucial M.2 1TB (CT1000P1SSD8) P1
• MSI GeForce GTX 1660 Super Gaming X
• Chieftec ATX 650W Retail Proton (BDF-650C)

I enabled XMP profile to run memory in 3200, default is 26xx something, installed Windows. And I thought I was done with it. I was wrong.

OTB my idle CPU frequencies were 3.9-4.1GHz and temperature was 60C which is nuts. During game sessions I had temperature around 85C (95C max) and stock cooler was very loud. I did some research and after that disabled PBO and CPB in motherboard's bios. Also when I did that I noticed that RAM frequency was reset to 26xx and I enabled XMP again. CPU temperature dropped to 45C idle and 65C during games (73C max). It was last week.

Yesterday I noticed that cooler was too loud and fps dropped. I checked BIOS and again PBO and CPB were set to auto, RAM to 26xx. I set everything to desired again. Also I uninstalled Astock A-tunning from windows (I haven't used it and it doesn't provide anything I can't access from BIOS). I used PC all day - gaming, some movies couple of restarts in between to ensure that bios settings wouldn't reset. Everything was fine. Switched it off and went to sleep.

Today I started my PC and again all settings were set to their default values.

What could cause the issue? How can I fix it? Is it faulty motherboard?


*OTB - out of the box

I tried a couple of things. Firstly, make sure the stock cooler is set to high. You'll know because it's unbearably noisy. I have also switched on ECO mode. Here are some figures running a script that uses 10 cores at nearly 100%:

Stock
Temp: CPU 76C, CASE 48C
Fans: 850 3260 1280rpm
Utilisation and core speed: 42% 4.03GHz
Runtime: 2:15.3 minutes

ECO:
Temp: CPU 71.5C, CASE 48C
Fans: 600 3150 1180rpm
Utilisation and core speed: 42% 3.93GHz
Runtime: 2:21.3 minutes

I've ordered a new cooler (arctic liquid freezer ii 240) which will hopefully give me similar or better cooling performance without making me want to throw it out the window. I'll probably stick with ECO mode, seeing as the runtime difference is slight.

The stock cooler is OK for gaming. Because games won't put all the cores to work at full load all the time.

But for full core usage workloads, you need a better cooler. (They will still run colder than P95 max power test, but they will still generate heat).

Yes, it's a different beast, even to Zen+. These CPUs tolerate up to 95繙C. It's within the normal limits. So don't really worry about temp.

If you want to have the cores working 24/7. I recommend you to use "Manual OC" with Underclock and Undervolt. You can run the cores at very low voltage (maybe less than 1.0 or 1.1v) and at lower frequency, and save a lot of money in energy bills. (The stock Precision boost curves add extra voltage to try to provide general stability). But if you follow this approach, try to stay below 1.15v-1.2v unless you read a lot about the topic and understood what is a safe all core voltage. (which is much lower than the one used by Precision Boost / Stock / Auto).


About the RAM issue. I recommend you trying the thaiphoon + DRAM calc solution (works for some, but not for all) and try to set up the ram timings manually, as well as the SoC Voltage and Fabric Clock.
I personally don't know a lot about this. I don't change all the settings, only 80% of them.


But I'm currently running my 3200Mhz "cheap" Micron-E memories at 3733Mhz 18/20/20/20 ("Safe Preset") with 1.45v dram voltage and it's 100% stable in my B450 ITX.
Only thing I should increase is the VDDG voltage, but the settings doesn't work in the B450 ITX BIOS for some reason.
But it is still stable. So I don't worry