ASRock.com Homepage
Forum Home Forum Home > Technical Support > HTPC&Gaming Barebone&Others
  New Posts New Posts RSS Feed - deskmini a300 boot problem
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

deskmini a300 boot problem

 Post Reply Post Reply Page  123>
Author
Message
michischo View Drop Down
Newbie
Newbie
Avatar

Joined: 25 Mar 2020
Status: Offline
Points: 5
Post Options Post Options   Thanks (0) Thanks(0)   Quote michischo Quote  Post ReplyReply Direct Link To This Post Topic: deskmini a300 boot problem
    Posted: 25 Mar 2020 at 11:09pm
I have just set up my new a300 (outfitted with an athlon 200GE, 8 gb ram, sata-ssd) and installed windows 10 home. the system came up fine (at first) and i started the windows update process to install the latest updates. I had to do several reboots and after one of those, the system did not come back. All that appeared on the screen was a dotted circled, singalling an ongoing process going on, after a while even that disappeard and the screen went black. The system did not shut down, obviously it was hanging at some point before booting into windows.
I can restart and enter the uefi-setup, but i can't find anything useful to change there. I tried to reboot into my windows setup-stick and to reinstall the OS, but it won't boot from the stick as well.
I tried to find a solution in the forum. I found a hint at a possible problem with the used memory slot, so i flipped the ram to the other slot, but that did not change a thing.
Some people have reported problems with the video-configuration, some similar issues seemingly could be addressed by resetting the CMOS, but I am unsure as to what to try next.
current bios is ver. 3.5
thankful for any hint...
Back to Top
ASRock_TSD View Drop Down
ASRock_Official
ASRock_Official


Joined: 20 Mar 2015
Status: Offline
Points: 8727
Post Options Post Options   Thanks (0) Thanks(0)   Quote ASRock_TSD Quote  Post ReplyReply Direct Link To This Post Posted: 27 Mar 2020 at 10:22am
Dear Michischo,

Thank you for choosing ASRock.

Regarding your case, we provide some suggestion to try.
1. Clear CMOS to load BIOS default.
2. Update to the latest BIOS.
http://www.asrock.com/nettop/AMD/DeskMini%20A300%20Series/index.asp#BIOS
3. Re-install a clean OS and install the latest driver from ASRock site.

Thank you!
Yours truly,
ASRock TSD
Back to Top
michischo View Drop Down
Newbie
Newbie
Avatar

Joined: 25 Mar 2020
Status: Offline
Points: 5
Post Options Post Options   Thanks (0) Thanks(0)   Quote michischo Quote  Post ReplyReply Direct Link To This Post Posted: 27 Mar 2020 at 7:38pm
Following a hint from Asrock-Support, I detached the disks and was able to boot to bios (uefi). Turned out that one of the two sata disks i had installed was bad. After tearing that disk out (it was a preused one, installed in sata 2) the system came back.
Nevertheless i updated the Bios, everything continued to work fine.

However, after adding another spare (preused) disk to sata 2, that disk also failed after a short time. Again, the system is fine after removal of that disk. Like the disk before, the drive is no longer accessible on another system.

This makes me wonder whether maybe the A300 killed both disks. Has anybody had similar problems? Right now, i am using just one disk in sata 1.
Back to Top
ASRock_TSD View Drop Down
ASRock_Official
ASRock_Official


Joined: 20 Mar 2015
Status: Offline
Points: 8727
Post Options Post Options   Thanks (0) Thanks(0)   Quote ASRock_TSD Quote  Post ReplyReply Direct Link To This Post Posted: 31 Mar 2020 at 7:44pm
Dear Michischo,

Regarding your case, please help to check if the problem relates to SATA port or SATA cable.
If possible, please change another SSD to try.

Thank you!
Yours truly,
ASRock TSD
Back to Top
michischo View Drop Down
Newbie
Newbie
Avatar

Joined: 25 Mar 2020
Status: Offline
Points: 5
Post Options Post Options   Thanks (0) Thanks(0)   Quote michischo Quote  Post ReplyReply Direct Link To This Post Posted: 31 Mar 2020 at 8:19pm
The system is running fine with just one ssd being installed on sata 1 port. I have checked that ssd with both sata cables provided and had also hooked it up to the other port; it was functioning fine with either cable and port.
therefore i don't think that the cable is the problem. If the problem does not relate to the hdd-s having been used and worn-out before, it might be that the system is "overwhelmed" when 2 drives are connected. Perhaps the power needs of the additional are too much?
Back to Top
nasenag View Drop Down
Newbie
Newbie


Joined: 02 Jun 2020
Status: Offline
Points: 1
Post Options Post Options   Thanks (0) Thanks(0)   Quote nasenag Quote  Post ReplyReply Direct Link To This Post Posted: 02 Jun 2020 at 4:12am
I have been running A300 with AMD 2400G With 3.6 Bios ( this is my sub machine for testing) with Windows 10.
Updated to Windows 10 2004 Update and stop booting

Cleared CMOS - Boot Once and Stop
Everytime I clear CMOS it boots but when I Reboot it stop
Same goes with Ubuntu 20.04 - so I don?™t think there is any issue with the OS it self.
I have two SSD and One M.2 NVME

I been reading many forum does this mean the power issue when two SSD is connected ??

Can AsRock confirm that it is power issue for having two SSD ?

( will try out with one SSD later today and post an update )
Back to Top
jameswilddev2 View Drop Down
Newbie
Newbie


Joined: 03 Jun 2020
Status: Offline
Points: 5
Post Options Post Options   Thanks (0) Thanks(0)   Quote jameswilddev2 Quote  Post ReplyReply Direct Link To This Post Posted: 03 Jun 2020 at 10:03pm
I'm seeing the same problems as you with just one NVME - I get one boot per CMOS clear - ASRock did not indicate to me that fixed firmware is on the way. Perhaps if we make enough noise they will fix this bug.
Back to Top
Hammerfest View Drop Down
Newbie
Newbie


Joined: 05 Jun 2020
Status: Offline
Points: 21
Post Options Post Options   Thanks (0) Thanks(0)   Quote Hammerfest Quote  Post ReplyReply Direct Link To This Post Posted: 05 Jun 2020 at 5:08am
sucks that so many of us having issues and fix forthcoming

everyone with the issue should make a support ticket
Back to Top
MotorPsico View Drop Down
Newbie
Newbie


Joined: 17 Jun 2020
Status: Offline
Points: 1
Post Options Post Options   Thanks (0) Thanks(0)   Quote MotorPsico Quote  Post ReplyReply Direct Link To This Post Posted: 17 Jun 2020 at 2:31am
Same problem here.

Have just bought an A300, installed with Athlon 3000G, Noctua cooler, 2x4gb Crucial Sodimm and 2x1tb Crucial P1 NVMe SSD.

Installed Ubuntu 20.04 to an USB, and after rebooting from the install I get a blank screen, no Bios access, no booting.

The only solution was to clear the cmos, then I was able to enter the bios, boot and Ubuntu was working, thought I was some glitch, installed and configured things in Ubuntu, restarted and again, blank screen after rebooting.

Once again I cleared the cmos, and I was able to enter the Bios, the version of the bios was 3.5 so I updated it to 3.6.

I then installed FreeNAS to give it a try, installed and restarted without a problem, I tried couple of times so I thought the problem was solved.

I wasn?™t happy with FreeNAS, so I decided to go back to Ubuntu, now I installed Ubuntu but in one of the NVMe disks, installation run without any problem, and at the time of restarting, again blank screen, no bios access no booting, nothing.

I will have to clear the cmos AGAIN in order to be able to do something.

This is really annoying, Asrock should give us a solution really fast.

I have this very clear, this is solved within a week or the case is going back and I will give very bad opinions about A300 setup.

Could it be a UEFI problem? Read about this kind of problems in Ubuntu forums.
Back to Top
linuxrocks View Drop Down
Newbie
Newbie


Joined: 27 Jun 2020
Status: Offline
Points: 1
Post Options Post Options   Thanks (0) Thanks(0)   Quote linuxrocks Quote  Post ReplyReply Direct Link To This Post Posted: 27 Jun 2020 at 12:37am
I too have this problem. After clearing CMOS I get one boot. A reboot will just cause a black screen.
Back to Top
 Post Reply Post Reply Page  123>
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.218 seconds.