3800x not boot x370 taichi error 33 7b 66

cx5 wrote: datonyb wrote: use the ryzen dram calculator Hello da tony b, Yeah, of course I am, just not lucky, am in process of using 1usmus calculator only as a guide then change here change there many trials effort ahead. BTW I'm no longer using the Corsairs CMK32GX4M2B3000C15, but Hall of Fame 4x8gb with Zen2 the experiences from Corsair+Zen1 completely different and not immediately useful.

hello mate

im still rocking samsung b dies in tridentz

glad i picked them up for mega mega cheap when a major u.k. retailer went into liquidation

im stable at 3600mhz cl16 on bios 5.8 with the 3800x

i just cant be bothered to set any 'show-off' speeds and timings these days , i spent so much time on the r7 1700 when we first got our boards to get some good ram results ,its kinda pointless now with the 3800x and 3600 ram

datonyb wrote: use the ryzen dram calculator

Hello da tony b,

Yeah, of course I am, just not lucky, am in process of using 1usmus calculator only as a guide then change here change there many trials effort ahead.

BTW I'm no longer using the Corsairs CMK32GX4M2B3000C15, but Hall of Fame 4x8gb with Zen2 the experiences from Corsair+Zen1 completely different and not immediately useful.

R_two wrote: cx5 wrote: ram timing fault as usual due intel XMP Have similar issue with ram, I just not use xmp profile and set ram frequency to 3000

use the ryzen dram calculator

Thank you man, I did the cleaning procedure, error codes still appear, but now the system always loads, there is no need to reinstall the video card in another slot to boot system

@ASRock tech support, may be next bios update solve below anomaly??? or am my mobo hardware problem?

My 3800x just died, replacement 3800x gave many similar symptoms and I thought it was dead too, but then found out motherboard pcie slot-2 is real culprit, experience sharing below.

ASRock X370 Taichi, bios 6.2
3800x (first unit)
new ram = 4x8GB GALAX HOF 3600 c171818 Intel XMP not compatible with Ryzen.
pcie slot-2 occupied by Optane_900p windows boot drive.
or GPU in slot-2, sometimes put Optane_900p in slot-1.

Regardless, slot-2 must be occupied.

So the system hangs, windows crash, game crash, all these because ram timing fault, then the real problem comes. Reboot failure. Power off power on boot failure.

************* Dr Debug always loop 33,7a,3b,b6 *****************

1) reset button not working.
2) clear cmos jumper not working.
3) pull out cmos battery also not working.

system cannot boot regardless.

4) reseat CPU, RAM, GPU, Optane_900p, still cannot boot, dr debug 33,7a,3b,b6 persist.
5) boot without cmos battery not working.

6) took CPU+motherboard to warranty centre, immediately boot OK. Dam... dr debug shows more number, especially easy to read and catch is 27, 99, 98, b2,
7) go home boot failure.

8) don't know what I did, boot success, managed to see 27, 99, 98, b2 before windows boot. This is GOOD indicator to me. Use a few days, ram timing fault as usual due intel XMP, system hangs, boot loop error code 33,7a,3b,b6


then ram timing fault again, repeat 4), 5), 8).


then ram timing fault again few days later, I had enough, seriously suspect CPU, took it alone to warranty and confirmed dead, replaced a new, so happy, thinking all problem go away....... fresh CPU go home boot failure.


9) take ram+cpu+motherboard to warranty centre, boot OK again, really killing me now, dr debug shows 27, 99, 98, b2, which is good.

10) go home boot failure. Why ???????????????

11) finally, last suspect, copy warranty centre, no SSD, must NOT install to pcie slot-2. i.e. either no Optane_900p only boot to bios OK, I managed to see quick debug go away 27, 99, 98, b2,

12) or I boot without GPU, but with Optane_900p in slot-1, code 27, 99, 98, b2 appears means boot success, not boot loop 33,7a,3b,b6.

13) whenever slot-2 is occupied, reset button &/or jumper clear cmos &/or remove battery cmos fail. stuck at error loop 33,7a,3b,b6

14) as long as slot-2 is NOT occupied, reset button works, clear cmos works, remove battery cmos works.

dam .......... wasted so many days troubleshoot and trip to warranty centre.... and troubled the warranty officer.

15) solution for now, M.2 socket + convertor riser pcie slot + extension cable to Optane_900p. GPU in slot-1. slot-2 not occupied.

16) ram timing fault, system hang, reset button works.

17) ram timing fault, system hang, dr debug shows new code = A0. no longer boot loop 33,7a,3b,b6, suspect because slot-2 not occupied.

18) no reset, reboot again without reset, error code A0, windows cannot boot.

19) no reset, reboot enter bios, but bios hang, unable to enter bios, error code A0.

20) reboot again A0 does not appear, windows boot success.

before this was using 1700x, none of the above ever encountered. Never before boot loop 33,7a,3b,b6.

Zen 2 is completely different from zen 1.

The problem behavior and symptoms characteristics completely different.

Hope tech support release new bios that not stuck loop boot error code 33,7a,3b,b6 non stop.

Hope tech support release new bios allow reset when pcie slot-2 is occupied.

Would USB2 USB3 extention cable affect with pcie slot-2????